Latinica

[djux]

Fri Aug 25 04:35:22 CDT 2006
Here is Slackware 11.0 release candidate 3. I think most of the irresistible
      upgrades are in here now, and the bug reports have been mostly handled.
      There may still be a few changes, and possibly another release candidate,
      but this is pretty close to final with the exception of updating
      documentation and building ZipSlack. Thanks very much to everyone who is
      helping to test these release candidates — I think this is going to be a
      very up to date and stable release. 🙂
a/glibc-solibs-2.3.6-i486-5.tgz: Patched an issue with kernel version parsing
      in ld-2.3.6.so that was leading glibc to treat 2.4 kernels with 4 version
      parts (such as 2.4.33.2) as if they supported NPTL, leading to a crash
      at boot.
a/glibc-zoneinfo-2.3.6-noarch-5.tgz: Updated timezone information from
      tzdata2006j.
a/kernel-ide-2.4.33.2-i486-1.tgz: Upgraded to 2.4.33.2 sata.i kernel.
      Enabled support for OOM killer and HIGHMEM4G.
a/kernel-modules-2.4.33.2-i486-1.tgz: Upgraded to Linux 2.4.33.2 modules.
a/udev-097-i486-6.tgz: Restore ttyUSB access to members of the tty group.
      Thanks to Eugene Crosser.
      In rc.udev, ignore lines that start with ‘#’.
      Thanks to Ian Bates.
      Removed hostap and hostap_cs dupes from blacklist.
      Thanks to giovanni quadriglio.
      Patched rc.optical-symlinks to avoid error messages with real SCSI devices
      and the SCSI generic driver.
      Thanks to Lorenzo Buzzi.
ap/lm_sensors-2.10.0-i486-1.tgz: Added lm_sensors-2.10.0, which contains the
      libsensors library that KDE can use for hardware status monitoring.
ap/vim-7.0.066-i486-1.tgz: Upgraded to vim 7.0.066.
      Added reasonable default vimrc if none exists. Thanks to Eric Hameleers.
xap/vim-gvim-7.0.066-i486-1.tgz: Upgraded to gvim 7.0.066 (requires vim).
d/kernel-headers-2.4.33.2-i386-1.tgz: Upgraded to Linux 2.4.33.2 headers.
d/perl-5.8.8-i486-2.tgz: Upgraded to DBD-mysql-3.0006 and DBI-1.52.
      Eugene Crosser reported that DBD compiled against an older version of
      libmysqlclient no longer worked without a recompile. Just to be on the
      safe side, everything linked with libmysqlclient is getting recompiled.
d/pkgconfig-0.21-i486-2.tgz: Export PKG_CONFIG_PATH.
k/kernel-source-2.4.33.2-noarch-1.tgz: Upgraded to Linux 2.4.33.2 source.
      Enabled support for OOM killer and HIGHMEM4G in default .config.
kde/amarok-1.4.2-i486-1.tgz: Upgraded to amarok-1.4.2.
kde/kdebase-3.5.4-i486-6.tgz: Recompiled to use libsensors with ksysguardd.
      Fixed location of kdeglobals, removed font defaults but kept the
      anti-aliasing fixes.
kde/koffice-1.5.2-i486-3.tgz: Recompiled against libmysqlclient and libruby.
kde/qt-3.3.6-i486-3.tgz: Recompiled against libmysqlclient, added symlink
      in /usr/lib/pkgconfig to qt-mt.pc.
l/alsa-driver-1.0.11_2.4.33.2-i486-1.tgz: Recompiled for Linux 2.4.33.2.
l/glibc-2.3.6-i486-5.tgz: Patched an issue with kernel version parsing in
      ld-2.3.6.so that was leading glibc to treat 2.4 kernels with 4 version parts
      (such as 2.4.33.2) as if they supported NPTL, leading to a crash at boot.
      Added sa_IN and ru_RU.CP1251 locale support.
      Updated timezone information from tzdata2006j.
      Updated timezone utilities from tzcode2006j.
l/glibc-i18n-2.3.6-noarch-5.tgz: Rebuilt.
      Added sa_IN and ru_RU.CP1251 locale support.
l/glibc-profile-2.3.6-i486-5.tgz: Recompiled.
l/libmusicbrainz-2.1.4-i486-1.tgz: Upgraded to libmusicbrainz-2.1.4.
l/libvisual-0.4.0-i486-1.tgz: Added libvisual-0.4.0. Just the library for
      now (no plugins), but this should make it much easier to compile and use
      audio visualization plugins without having to recompile amaroK.
n/bitchx-1.1-i486-4.tgz: Recompiled against libmysqlclient.
n/openldap-client-2.3.27-i486-1.tgz: Upgraded to openldap-client-2.3.27.
n/php-4.4.4-i486-2.tgz: Recompiled against libmysqlclient.
t/tetex-3.0-i486-4.tgz: Recompiled against new LessTif to stop warnings
      from xdvi.
t/tetex-doc-3.0-i486-4.tgz: Rebuilt. Moved info pages to /usr/info.
      Thanks to Kris Karas for pointing out the misplaced info pages.
xap/gimp-2.2.13-i486-1.tgz: Upgraded to gimp-2.2.13.
extra/3dfx-glide/*: Removed, as it most likely doesn’t work.
extra/k3b/k3b-0.12.17-i486-1.tgz: Upgraded to k3b-0.12.17.
extra/k3b/k3b-i18n-0.12.17-noarch-1.tgz: Upgraded to k3b-i18n-0.12.17.
extra/linux-wlan-ng/linux-wlan-ng-0.2.1pre25_2.4.33.2-i486-1.tgz:
      Recompiled for Linux 2.4.33.2.
extra/slackpkg/slackpkg-2.08-noarch-3.tgz: Upgraded to slackpkg-2.08-noarch-3.
      Thanks to Piter Punk.
bootdisks/*: Upgraded to Linux 2.4.33.2 kernels.
isolinux/initrd.img: Upgraded USB/IEEE1394 modules to Linux 2.4.33.2.
isolinux/network.dsk: Upgraded network modules to Linux 2.4.33.2.
isolinux/pcmcia.dsk: Upgraded pcmcia modules to Linux 2.4.33.2.
rootdisks/install.1: Upgraded USB/IEEE1394 modules to Linux 2.4.33.2.
rootdisks/install.2: Upgraded USB/IEEE1394 modules to Linux 2.4.33.2.
rootdisks/install.zip: Upgraded USB/IEEE1394 modules to Linux 2.4.33.2.
rootdisks/network.dsk: Upgraded network modules to Linux 2.4.33.2.
rootdisks/pcmcia.dsk: Upgraded pcmcia network modules to Linux 2.4.33.2.
kernels/*: Upgraded to Linux 2.4.33.2 kernels, except the huge.s kernel.

After much thought and consultation with developers, it has been decided to
move 2.6.17.x out of /testing and into /extra. It runs stable by all reports,
has better wireless support, and is not going to be stale as soon. In
addition, HIGHMEM4G has been enabled. This caused no problems with my old
486 with 24MB (the one I use for compiling KDE ;-), and Tomas Matejicek has
enabled this in SLAX for a long time with no reports of problems, so I
believe it is a safe option (and is needed by many modern machines).
Thanks again to Andrea for building these kernels and packages. 🙂

kernels/huge26.s/*: Upgraded huge26.s kernel to 2.6.17.11.
extra/linux-2.6.17.11/kernel-generic-2.6.17.11-i486-1.tgz:
      Upgraded to Linux 2.6.17.11 generic kernel.
extra/linux-2.6.17.11/kernel-headers-2.6.17.11-i386-1.tgz:
      Upgraded to Linux 2.6.17.11 kernel headers.
extra/linux-2.6.17.11/kernel-modules-2.6.17.11-i486-1.tgz
      Upgraded to Linux 2.6.17.11 kernel modules.
      Load PC speaker support in rc.modules. Thanks to NetrixTardis.
extra/linux-2.6.17.11/kernel-source-2.6.17.11-noarch-1.tgz
      Upgraded to Linux 2.6.17.11 kernel source.

testing/packages/cairo-1.2.4-i486-1.tgz: Added cairo-1.2.4.
testing/packages/fontconfig-2.3.95-i486-1.tgz: Added fontconfig-2.3.95.
testing/packages/php-5.1.5/php-5.1.5-i486-2.tgz: Recompiled against
      libmysqlclient.

[djux]

Stigao je Slackware 11.0 release candidate 2. Mislim da mozemo uskoro da ocekujemo final verziju  O0

[djux]

Fri Jul 14 18:31:20 CDT 2006
We *are* getting closer to 11.0, friends.
I’m hoping for a larger changeset soon, but this should be fun to play with
for now as I work on the TODO list; merging, compiling, and initial testing.
n/samba-3.0.23-i486-1.tgz: Upgraded to samba-3.0.23.
        This fixes a minor memory exhaustion DoS in smbd.
        The CVE entry for this issue may be found here:
        http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-3403
        (* Security fix *)
kernels/huge26.s/*: Upgraded huge26.s kernel to 2.6.16.24.
        The name of the big kernel with many built-in options has been changed from
        test26.s to huge26.s to reflect that Slackware 11.0 will consider the
        2.6.16.x kernel series to be a supported kernel series. However, I’m
        probably going to leave the bare.i 2.4.32 kernel as the default kernel (or
        perhaps sata.i?) as it has very good performance and probably better security
        due to the simpler and longer-tested design. I might apply or at least make
        available in the kernel-source package for 2.4.32 a patch to fix direct
        rendering with 2.4.x kernels and X.Org 6.9.0 or newer. Since anyone using
        Slackware for server use isn’t likely to be loading the DRI modules, it’s
        untouched code on those machines and won’t affect server stability (well,
        depending on what, if anything, outside of the module is changed in the
        kernel). It is probably a safe enough patch to apply. I’d rather ship 100%
        vanilla kernels (and might, with the patch “on the side”), but DRI does not
        work without the patch past X.Org 6.8.2. Is this enough text here?
        Perhaps I should rename this my “ChangeBlog”.
Thanks to Andrea Volkerding for compiling these kernel packages: 🙂
extra/linux-2.6.16.24/alsa-driver-1.0.11_2.6.16.24-i486-1.tgz:
        Upgraded to alsa-driver-1.0.11 compiled for Linux 2.6.16.24.
extra/linux-2.6.16.24/kernel-generic-2.6.16.24-i486-1.tgz:
        Upgraded to Linux 2.6.16.24 generic kernel.
extra/linux-2.6.16.24/kernel-headers-2.6.16.24-i386-1.tgz:
        Upgraded to Linux 2.6.16.24 kernel headers.
extra/linux-2.6.16.24/kernel-modules-2.6.16.24-i486-1.tgz
        Upgraded to Linux 2.6.16.24 kernel modules.
extra/linux-2.6.16.24/kernel-source-2.6.16.24-noarch-1.tgz
        Upgraded to Linux 2.6.16.24 kernel source.
testing/packages/linux-2.6.17.4/kernel-generic-2.6.17.4-i486-1.tgz:
        Upgraded to Linux 2.6.17.4 generic kernel.
testing/packages/linux-2.6.17.4/kernel-headers-2.6.17.4-i386-1.tgz:
        Upgraded to Linux 2.6.17.4 kernel headers.
testing/packages/linux-2.6.17.4/kernel-modules-2.6.17.4-i486-1.tgz
        Upgraded to Linux 2.6.17.4 kernel modules.
testing/packages/linux-2.6.17.4/kernel-source-2.6.17.4-noarch-1.tgz
        Upgraded to Linux 2.6.17.4 kernel source.

Iz ovoga se definitivno zakljucuje da Pat definitivno uskoro namerava da izbaci Slack 11.0 uz punu podrsku za 2.6 platformu. Sta reci osim da jedva cekam !!!

[djux]

Da li si kao root odradio X -configure? Ako jesi u root direktorijumu imas xorg.conf.new koji potom treba da kopiras u /etc/X11/ kao xorg.conf

[djux]

Mnogo linux distribucija tipa Slackware 10.1, Mandriva 10.0, 10.1, 10.2, Suse 9.2, Vector SOHO 5.0 …
Kao i FreeBSD 5.3, Solaris 10 …
Vise i sam neznam 🙂

[djux]

I PC-BSD i DesktopBSD su ti derivati FreeBSD-a, što znači ako si malo iskusniji korisnik i malo bolje se razumeš tu ti je uvek neprevaziđeni FreeBSD 🙂

Apsolutno se slazem. I konfiguracija FreeBSD-a uopste nije strasna, jer poseduju fenomenalan handbook.

[djux]

[quote]sistema traje 20s.

Ovo je “veoma koristan” podatak..

Da ne kažem da nema nikakvog smisla jer nisi rekao bar jednu od dve stvari:
1. Na kakvoj mašini
2. Boot kod prethodnih verzija je trajao …

Bojim se da ovako taj podatak ne znači ništa…[/quote]

U pravu si, procitao sam review na :
http://www.tuxmachines.org/node/2551

[djux]

Obzirom na pređašnja iskustva, vrlo lako se da proceniti 🙂

Iskreno ja sam vise bio razocaran suse-om nego mandrivom. Mnogo je spor, a kao sto svi znamo od multimedije sada cak po default-u ne ukljucuje ni mp3. Kako sam iz posta primetio coveka interesuje nesto lako za rukovanje, a bogato multimedijom – MANDRIVA 🙂

[djux]

Jedino sto meni pada na pamet je nova mandriva 2006, bogat multimedijalni sadrzaj, a i dosta je brza od predhodne verzije. Na primer boot sistema traje 20s. Sada koliko je bug-ovita to je tesko proceniti !?

[djux]

Posle make menuconfig:

make bzImage && make modules && make modules_install
cp /usr/src/linux/System.map /boot/System.map-2.6.10
cp /usr/src/linux/arch/i386/boot/bzImage /boot/bzImage-2.6.10
mv System.map System.map.old
ln -sf /boot/System.map-2.6.10 System.map
mcedit /etc/lilo.conf

image = /boot/bzImage-2.6.10
root = /dev/hdxx
label = Linux-2.6.10
read-only

lilo

To je ukratko to 🙂

[Autor]

Članci