Направљене поруке на форуму
-
АуторЧланци
-
DexУчесник
fora za drajver od 7 megabajta je da u sebi nesadrzi prekompajlirane module za neke kernele i zato je manji ali sve se drugo nalazi isto kao i u vecem drajveru.
DexУчесникda ne otvaram novu temu
Kako bilo sta kompajlirati bez da skidam kernel-source
ps Dial-upDexУчесникna kraju xorg.conf fajla upisi
Section DRI
Mode 0666
EndSectioni to je to
DexУчесникKada sam prebacivao drajvove normalno je da sam promenio pozicije dzampera.Da nisam to uradio nebi mi nista ni radilo zar ne?
DexУчесникpovezao sam dvd na prvu ide granu sa hardom a cdrom na drugu granu i sve sljaka bez problem.
Hvala svima.DexУчесникda nebi otvarao novi temu:
instalirao sam slackware 10.2 sa kernelom 2.6.13
imam dva drajva LG cdrw koji je povezan sa hardom na prvoj ide grani i NEC DVDRW na drugoj grani.
Kada pokusam da mauntujem LG on se zavrti i kao da sve vreme nesto cita sa njega i nece nikako da ga mountuje.
To mi se nije desavalo sa 2.4 kernelom.
hvala unapredFSTAB:
/dev/hda7 swap swap defaults 0 0
/dev/hda8 / ext3 defaults 1 1
/dev/hda6 /home ext3 defaults 1 2
/dev/hda1 /mnt/win_c ntfs ro,umask=022 1 0
/dev/hda5 /mnt/win_d ntfs ro,umask=022 1 0
/dev/hdb /mnt/cdrom auto noauto,user,ro 0 0
/dev/hdc /mnt/dvd auto noauto,user,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0DexУчесникipak je
test26.s root=/dev/hdx noinitrd rohvala.
DexУчесникevo ga moj xorg.conf fajl:
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the “Software”),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed
# this out to me. 🙂
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! 🙂
# — [email protected]
#
# **********************************************************************
# Module section — this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard’s InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer’s InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section “InputDevice”
# Identifier “spaceball”
# Driver “magellan”
# Option “Device” “/dev/cua0”
# EndSection
#
# Section “InputDevice”
# Identifier “spaceball2”
# Driver “spaceorb”
# Option “Device” “/dev/cua0”
# EndSection
#
# Section “InputDevice”
# Identifier “touchscreen0”
# Driver “microtouch”
# Option “Device” “/dev/ttyS0”
# Option “MinX” “1412”
# Option “MaxX” “15184”
# Option “MinY” “15372”
# Option “MaxY” “1230”
# Option “ScreenNumber” “0”
# Option “ReportingMode” “Scaled”
# Option “ButtonNumber” “1”
# Option “SendCoreEvents”
# EndSection
#
# Section “InputDevice”
# Identifier “touchscreen1”
# Driver “elo2300”
# Option “Device” “/dev/ttyS0”
# Option “MinX” “231”
# Option “MaxX” “3868”
# Option “MinY” “3858”
# Option “MaxY” “272”
# Option “ScreenNumber” “0”
# Option “ReportingMode” “Scaled”
# Option “ButtonThreshold” “17”
# Option “ButtonNumber” “1”
# Option “SendCoreEvents”
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the “-screen”
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# “-layout” option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.Section “ServerLayout”
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include “CorePointer”, “CoreKeyboard” and
# “SendCoreEvents”.
Identifier “Simple Layout”
Screen 0 “aticonfig Screen 0” 0 0
InputDevice “Mouse1” “CorePointer”
InputDevice “Keyboard1” “CoreKeyboard”
EndSectionSection “Files”
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like “.txt” or “.db”). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don’t have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath “/usr/X11R6/lib/modules”
RgbPath “/usr/X11R6/lib/X11/rgb”
FontPath “/usr/X11R6/lib/X11/fonts/local/”
FontPath “/usr/X11R6/lib/X11/fonts/misc/”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi/:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi/:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/Type1/”
FontPath “/usr/X11R6/lib/X11/fonts/CID/”
FontPath “/usr/X11R6/lib/X11/fonts/Speedo/”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi/”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi/”
FontPath “/usr/X11R6/lib/X11/fonts/cyrillic/”
EndSectionSection “Module”
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
Load “dbe” # Double buffer extension
SubSection “extmod”
Option “omit xfree86-dga” # don’t initialise the DGA extension
EndSubSection
Load “type1”
Load “freetype”
#Load “speedo”
Load “glx”
Load “dri”
EndSectionSection “InputDevice”
# For most OSs the protocol can be omitted (it defaults to “Standard”).
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option “Protocol” “Xqueue”
# Set the keyboard auto repeat parameters. Not all platforms implement
# this.
# Option “AutoRepeat” “500 5”
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
# Option “Xleds” “1 2 3”
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option “XkbDisable”
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a
European
# keyboard, you will probably want to use one of:
#
# Option “XkbModel” “pc102”
# Option “XkbModel” “pc105”
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option “XkbModel” “microsoft”
#
# If you have a US “windows” keyboard you will want:
#
# Option “XkbModel” “pc104”
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# Option “XkbLayout” “de”
#
# or:
#
# Option “XkbLayout” “de”
# Option “XkbVariant” “nodeadkeys”
#
# If you’d like to switch the positions of your capslock and
# control keys, use:
#
# Option “XkbOptions” “ctrl:swapcaps”
# These are the default XKB settings for X.Org
#
# Option “XkbRules” “xorg”
# Option “XkbModel” “pc101”
# Option “XkbLayout” “us”
# Option “XkbVariant” “”
# Option “XkbOptions” “”
Identifier “Keyboard1”
Driver “kbd”
EndSectionSection “InputDevice”
# Identifier and driver
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
# Option “Protocol” “Auto”
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
# Option “Device” “/dev/ttyS0”
# Option “Device” “/dev/ttyS1”
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option “Protocol” “Xqueue”
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option “BaudRate” “9600”
# Option “SampleRate” “150”
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option “Emulate3Buttons”
# Option “Emulate3Timeout” “50”
# ChordMiddle is an option for some 3-button Logitech mice
# Option “ChordMiddle”
Identifier “Mouse1”
Driver “mouse”
Option “Protocol” “IMPS/2”
# The mouse device. The device is normally set to /dev/mouse,
Option “Device” “/dev/mouse”
Option “Buttons” “7”
Option “ZAxisMapping” “4 5”
# Option “Device” “/dev/psaux”
EndSectionSection “Monitor”
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR’S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR’S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier “aticonfig Monitor 0”
HorizSync 30.0 – 85.0
VertRefresh 50.0 – 160.0
Option “DPMS”
EndSectionSection “Device”
Identifier “ATI Graphics Adapter 0”
Driver “fglrx”
Option “PreferredVRefresh” “85”
BusID “PCI:1:0:0”
EndSectionSection “Screen”
Identifier “aticonfig Screen 0”
Device “ATI Graphics Adapter 0”
Monitor “aticonfig Monitor 0”
DefaultDepth 24
SubSection “Display”
Viewport 0 0
Depth 24
Modes “1024×768” “800×600” “640×480”
EndSubSection
EndSectionSection “DRI”
Mode 0666
EndSectionslackware 10.2,ATI 9000 Pro
2.4.31 kernel
sve radi kako treba sa drajverom ati-driver-installer-8.23.7-i386.runDexУчесникprobaj u xorg.conf fajlu da promenis BusID PCI:1:0:1 u BusID PCI:1:0:0
18. септембар 2005. у 5:57 pm као одговор на: Kako da instaliram 536EP ( ex LJUDI POMAGAJTE!!!!) #34877DexУчесникimas ovaj link
http://www.ubuntulinux.org/wiki/IntelFiveThreeSixEPModemHowto
samo prati uputstvo
samo je na engleskom -
АуторЧланци