Ati Radeon 9600Pro ???

[nVideo]

Resio sam problem!!! 😀
Instalirao asm slack 10.1 na hda2 particiju koja je namenjena nekoj drugoj distribuciji, kompajlirao sam kernel izbacio dri i framebuffer stavio kao modul za sve kartice osim vga…
Nije ni bitno ne razumem ni ja sam sebe… U glavnom uradio sam isto sto i na mom starom Slack-u 10.1 ali ovde je instalacija drivera prosla bez problema i sve radi, Malo sam se zezao sa /dev/usb/mouse0 ali sve je ok! Istu stvar kada probam na starom slacku, ne dobijem nista! Zasto i kako nemam pojma… Al nema veze… RADI!
U glavnom odradjeno je u win fazonu. format c: i Setup.exe… Malo bez veze, al ne moze drugacije…

[Dex]

evo ga moj xorg.conf fajl:

# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the “Software”),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed
# this out to me. 🙂
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! 🙂
# — [email protected]
#
# **********************************************************************
# Module section — this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard’s InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer’s InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section “InputDevice”
# Identifier “spaceball”
# Driver “magellan”
# Option “Device” “/dev/cua0”
# EndSection
#
# Section “InputDevice”
# Identifier “spaceball2”
# Driver “spaceorb”
# Option “Device” “/dev/cua0”
# EndSection
#
# Section “InputDevice”
# Identifier “touchscreen0”
# Driver “microtouch”
# Option “Device” “/dev/ttyS0”
# Option “MinX” “1412”
# Option “MaxX” “15184”
# Option “MinY” “15372”
# Option “MaxY” “1230”
# Option “ScreenNumber” “0”
# Option “ReportingMode” “Scaled”
# Option “ButtonNumber” “1”
# Option “SendCoreEvents”
# EndSection
#
# Section “InputDevice”
# Identifier “touchscreen1”
# Driver “elo2300”
# Option “Device” “/dev/ttyS0”
# Option “MinX” “231”
# Option “MaxX” “3868”
# Option “MinY” “3858”
# Option “MaxY” “272”
# Option “ScreenNumber” “0”
# Option “ReportingMode” “Scaled”
# Option “ButtonThreshold” “17”
# Option “ButtonNumber” “1”
# Option “SendCoreEvents”
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the “-screen”
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# “-layout” option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section “ServerLayout”

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include “CorePointer”, “CoreKeyboard” and
# “SendCoreEvents”.
Identifier “Simple Layout”
Screen 0 “aticonfig Screen 0” 0 0
InputDevice “Mouse1” “CorePointer”
InputDevice “Keyboard1” “CoreKeyboard”
EndSection

Section “Files”

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like “.txt” or “.db”). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don’t have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath “/usr/X11R6/lib/modules”
RgbPath “/usr/X11R6/lib/X11/rgb”
FontPath “/usr/X11R6/lib/X11/fonts/local/”
FontPath “/usr/X11R6/lib/X11/fonts/misc/”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi/:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi/:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/Type1/”
FontPath “/usr/X11R6/lib/X11/fonts/CID/”
FontPath “/usr/X11R6/lib/X11/fonts/Speedo/”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi/”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi/”
FontPath “/usr/X11R6/lib/X11/fonts/cyrillic/”
EndSection

Section “Module”

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
Load “dbe” # Double buffer extension
SubSection “extmod”
Option “omit xfree86-dga” # don’t initialise the DGA extension
EndSubSection
Load “type1”
Load “freetype”
#Load “speedo”
Load “glx”
Load “dri”
EndSection

Section “InputDevice”

# For most OSs the protocol can be omitted (it defaults to “Standard”).
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option “Protocol” “Xqueue”
# Set the keyboard auto repeat parameters. Not all platforms implement
# this.
# Option “AutoRepeat” “500 5”
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
# Option “Xleds” “1 2 3”
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option “XkbDisable”
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a
European
# keyboard, you will probably want to use one of:
#
# Option “XkbModel” “pc102”
# Option “XkbModel” “pc105”
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option “XkbModel” “microsoft”
#
# If you have a US “windows” keyboard you will want:
#
# Option “XkbModel” “pc104”
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# Option “XkbLayout” “de”
#
# or:
#
# Option “XkbLayout” “de”
# Option “XkbVariant” “nodeadkeys”
#
# If you’d like to switch the positions of your capslock and
# control keys, use:
#
# Option “XkbOptions” “ctrl:swapcaps”
# These are the default XKB settings for X.Org
#
# Option “XkbRules” “xorg”
# Option “XkbModel” “pc101”
# Option “XkbLayout” “us”
# Option “XkbVariant” “”
# Option “XkbOptions” “”
Identifier “Keyboard1”
Driver “kbd”
EndSection

Section “InputDevice”

# Identifier and driver
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
# Option “Protocol” “Auto”
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
# Option “Device” “/dev/ttyS0”
# Option “Device” “/dev/ttyS1”
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option “Protocol” “Xqueue”
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option “BaudRate” “9600”
# Option “SampleRate” “150”
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option “Emulate3Buttons”
# Option “Emulate3Timeout” “50”
# ChordMiddle is an option for some 3-button Logitech mice
# Option “ChordMiddle”
Identifier “Mouse1”
Driver “mouse”
Option “Protocol” “IMPS/2”
# The mouse device. The device is normally set to /dev/mouse,
Option “Device” “/dev/mouse”
Option “Buttons” “7”
Option “ZAxisMapping” “4 5”
# Option “Device” “/dev/psaux”
EndSection

Section “Monitor”

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR’S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR’S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier “aticonfig Monitor 0”
HorizSync 30.0 – 85.0
VertRefresh 50.0 – 160.0
Option “DPMS”
EndSection

Section “Device”
Identifier “ATI Graphics Adapter 0”
Driver “fglrx”
Option “PreferredVRefresh” “85”
BusID “PCI:1:0:0”
EndSection

Section “Screen”
Identifier “aticonfig Screen 0”
Device “ATI Graphics Adapter 0”
Monitor “aticonfig Monitor 0”
DefaultDepth 24
SubSection “Display”
Viewport 0 0
Depth 24
Modes “1024×768” “800×600” “640×480”
EndSubSection
EndSection

Section “DRI”
Mode 0666
EndSection

slackware 10.2,ATI 9000 Pro
2.4.31 kernel
sve radi kako treba sa drajverom ati-driver-installer-8.23.7-i386.run

[doctorX]

Ja sam nekako instalirao drajvere za ATI ali mi se u K-meniju nije pojavio Control Centar.Kako da ga podesim?

[Аутор]

Чланци