Почетак › Форуми › Линукс дистрибуције › OpenSuSE › kako
- This topic has 53 одговора, 11 гласова, and was last updated 16 years, 11 months раније by dukenukem_4d.
-
АуторЧланци
-
6. јун 2007. у 11:44 am #55124dejaniumУчесник
@Seleuk
da, da, sad se secam, drajveri ne rade na 64bitnom OS-u, pribegao sam skupljem resenju problema, kupio sam eksterni modem umesto 32bitnog OS-a. ::) tehnicki, problem postoji :p
sledeci suse na mojoj masini ce biti 32bitni O0, tu odluku sam odavno doneo, jos kod 9.3 verzije, samo je ne primenjujem :'( nikako da narezem podatke s kompa pa da instaliram nove os-ve :- lenja buba
blago tebi, kinternet nece ni da se pokrene >:( kppp se ne povezuje, stalno se na nesto zali >:( wvdial radi bez problema :biggrin:
6. јун 2007. у 12:15 pm #55125dokmanУчесникLjudi procitao sam vase odgovore nocas, skinuo sam sa neta scanModem i uputstvo za njegovo instaliranje, ali sve sto sam uspeo uraditi je da sam instalirao driver za modem preko YAST-a, pokusao sam instalirati i scanModem po uputstvu, i nije mi uspelo, tamo pise:
Enter the following Linux commands:
gunzip scanModem.gz
chmod +x scanModem
./scanModem
*** Ubuntu user: replace last command by sudo ./scanModem *** Other user: first use command su to become superuser. *** All users: Follow the instructions which appear in the screen. Just hit Enter if you do not understand.Pocnem:
dokman@linux:~> su
password:
linux:/home/dokman # gunzip scanModem.gz /home/dokman/Desktop/scanModem.gz
gunzip: scanModem.gz: No such file or directoryto je verovatno bila komanda za raspakivanje ove ekstenzije .gz, proverim na desktopu postoji fajl “scanModem” i nigde nema onog originalnog “scanModem.gz”
linux:/home/dokman # chmod +x scanModem /home/dokman/Desktop/scanModem
chmod: cannot access `scanModem`: No such file or directorySta to znaci?
Sinoc mi se nije hteo ulogovati kao root, pa sam odustao i resio da pokusam ujutro instalirati scanModem i opet nista
6. јун 2007. у 12:29 pm #55126dejaniumУчесникdokman@linux:~> cd /home/dokman/Desktop/
dokman@linux:~> gunzip scanModem.gz
dokman@linux:~> chmod +x scanModem
dokman@linux:~> su
lozinka
linux:/home/dokman # cd /Desktop
linux:/home/dokman/Desktop #./scanModemvaljda je tako, probaj.
6. јун 2007. у 1:15 pm #55127dokmanУчесникOK, da vidimo, nadam se da ce proraditi, bar scanModem O0
6. јун 2007. у 2:01 pm #55128foxbunnyУчесникdokman@linux:~> cd /home/dokman/Desktop/
dokman@linux:~> gunzip scanModem.gz
[b][color=yellow]dokman@linux:~> cd scanModem[/color][/b] (mozda ovo treba)
dokman@linux:~> chmod +x scanModem
dokman@linux:~> su
lozinka
linux:/home/dokman # cd /Desktop
linux:/home/dokman/Desktop #./scanModemAko iz raspakovanog fajla izleti neki folder tipa scanModem, onda moras prvo da udjes u njega pre komande chmod (kao u primeru gore).
6. јун 2007. у 2:23 pm #55129dokmanУчесникUspeo sam uraditi ovo sto je dejanium rekao, dobio sam gomilu .txt fajlova: 1STREAD, DRIVERCOMPILING, INFOGENERAL, MODEMDATA, RATIONAL, SLMODEM, SLMODEM_ALSA, SOFTMODEM, TESTING, UNSUBSCRIBE, YOURMODEM, posto se ne snalazim bas najbolje sa engleskim jezikom, zna li neko iz iskustva sta je od ovoga bitno i odakle da procitam informaciju o modemu i njegovom cipsetu? Pa da ga probam osposobiti 😀
6. јун 2007. у 3:02 pm #55130MoneoУчесникProcitaj MODEMDATA
Koliko vidim po ovome SLMODEM ti nemas Lucent/Agere vec SmartLink sto je mozda i bolje 🙂6. јун 2007. у 3:25 pm #55131foxbunnyУчесникPogledaj ovde. To su upustva za podesavanje SmartLink drajvera.
http://en.opensuse.org/SDB:Manual_Setup_of_the_SmartLink_Driver_%28SUSE_LINUX_9.1%29
6. јун 2007. у 3:39 pm #55132dokmanУчесникEvo sta pise u MODEMDATA, ima dosta:
The kernel was assembled with compiler: 3.3.3
with current System compiler GCC=3.3.3
Modem candidates are at PCI_buses: 0000:00:09.0
Providing detail for device at 0000:00:09.0
with vendor-ID:device-ID
—-:—-
Class 0780: 11c1:048c Communication controller: Lucent Microelectronics: Unknown device 048c (rev 03)
SubSystem 11c1:044c Lucent Microelectronics: Unknown device 044c
Flags: bus master, medium devsel, latency 32, IRQ 9
Checking for IRQ 9 sharing with modem.
XT-PIC acpi, uhci_hcd, uhci_hcd, EMU10K1
—–PCI_IDs——- –CompilerVer-
Feature List: Primary Subsystem Distr KernelVer kernel default CPU
./scanModem test 11c1:048c 11c1:044c SuSE 2.6.4-52-default 3.3.3 3.3.3 i686
== Checking PCI IDs through modem chip suppliers ==Vendor 11c1 corresponds to Lucent Technologies or subsidiary Agere Systems, Inc.
Information is at: http://www.agere.com/client/modem_dsp.html. Produced are both:
1) modems identifiable from their primary PCI IDs and
2) soft modem Subystem chips requiring identification through codec readouts.
Lucent/Agere Mars/WinModem drivers from version 8.30 onwards have
the necessary fix for SMP machines which includes machines with
hyperthreading turned on (virtually acting as two CPUs).Class 0703: 11c1:048c is still NOT supported under Linux, as of 2006_Jan_11
It is a “software” modem without a digital signal processing (DSP) chipset.
The ltmodem drivers from http://ltmodem.heby.de resources for DSP modems do NOT provide support,
A dialout terminates with “No Carrier” or a Hang if usage of the ltmodem drivers is attempted. See InfoGeneral.txt about alternatives.======= PCI_ID checking completed ======
Update=2006_Jan_11
A PCMCIA CardBus is not detected on this System.
Checking for modem symbolic link support lines within /etc/udev/ filesThe kernel-2.6.4-52-default was compiled with CONFIG_REGPARM, providing more compact and faster code.
A /dev/modem symbolic link is not set.
The following information blocks just query some ppp support items.
====================================================
grep -rs ppp /etc/modprobe.*
————————————-
/etc/modprobe.conf:# ppp over ethernet
/etc/modprobe.conf:# the kernel 2.2 uses pppox
/etc/modprobe.conf:# the kernel 2.4 uses pppoe
/etc/modprobe.conf:alias char-major-108 ppp_generic
/etc/modprobe.conf:alias char-major-144 pppoe
/etc/modprobe.conf:alias net-pf-24 pppoe
/etc/modprobe.conf:# the kernel 2.2 uses ppp.o as ppp driver,
/etc/modprobe.conf:# the kernel 2.4 uses ppp_generic.o
/etc/modprobe.conf:alias ppp0 ppp_generic
/etc/modprobe.conf:alias ppp1 ppp_generic
/etc/modprobe.conf:alias tty-ldisc-3 ppp_async
/etc/modprobe.conf:alias ppp-compress-18 ppp_mppe
/etc/modprobe.conf:alias ppp-compress-21 bsd_comp
/etc/modprobe.conf:alias ppp-compress-24 ppp_deflate
/etc/modprobe.conf:alias ppp-compress-26 ppp_deflate
————————————-
Resident PPP support modules are properly uncompressed .
COMM services are not active
DEVPPP=crw-rw—- 1 root root 108, 0 2004-04-06 15:27 /dev/ppp
A /dev/modem symbolic link is not presentNo devfsd.conf file found, indicated absense of the devfsd daemon package
for device file system (devfs) symbolic link support.Koliko sam razumeo moj modem ima Lucent/Agere cipst, neka procita neko ko bolje zna engleski, neke stvari sam izbacio, cinilo mi se da je ovo najbitnije!
6. јун 2007. у 3:53 pm #55133foxbunnyУчесникPa, da. To znaci da imas Lucent/Agere modem. A jesi li probao sa drajverom? Je l’ radi?
-
АуторЧланци
Мораш бити пријављен да би поставио коментар у овој теми.