Latinica

[blekiwajt]

ja imam problem sa Copizom isti slucaj nemam bordere i ne mogu da kucam dok je upaljen compiz + emerald

xorg.conf je ‘vaki:
[code]# File generated by XFdrake (rev 57713)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section “Files”
    # font server independent of the X server to render fonts.
    FontPath “unix/:-1”
   
    # minimal fonts to allow X to run without xfs
    FontPath “/usr/share/fonts/misc:unscaled”
EndSection

Section “Extensions”
    Option “Composite”
EndSection

Section “ServerFlags”
    #DontZap # disable (server abort)
    #DontZoom # disable / (resolution switching)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection

Section “Module”
    Load “dbe” # Double-Buffering Extension
    Load “v4l” # Video for Linux
    Load “extmod”
    Load “type1”
    Load “freetype”
    Load “glx” # 3D layer
    Load “dri” # direct rendering
EndSection

Section “InputDevice”
    Identifier “Keyboard1”
    Driver “kbd”
    Option “XkbModel” “pc105”
    Option “XkbLayout” “us”
    Option “XkbOptions” “compose:rwin”
EndSection

Section “InputDevice”
    Identifier “Mouse1”
    Driver “mouse”
    Option “Protocol” “ExplorerPS/2”
    Option “Device” “/dev/mouse”
EndSection

Section “InputDevice”
    Identifier “Mouse2”
    Driver “evdev”
    Option “product” “0xc040”
    Option “vendor” “0x046d”
    Option “HWheelRelativeAxisButtons” “7 6”
EndSection

Section “Monitor”
    Identifier “monitor1”
    VendorName “Generic”
    ModelName “1024×768 @ 60 Hz”
    HorizSync 31.5-48.5
    VertRefresh 50-70
   
    # TV fullscreen mode or DVD fullscreen output.
    # 768×576 @ 79 Hz, 50 kHz hsync
    ModeLine “768×576”    50.00  768  832  846 1000  576  590  595  630
   
    # 768×576 @ 100 Hz, 61.6 kHz hsync
    ModeLine “768×576”    63.07  768  800  960 1024  576  578  590  616
EndSection

Section “Device”
    Identifier “device1”
    VendorName “ATI Technologies Inc.”
    BoardName “ATI Radeon (fglrx)”
    Driver “ati”
    Option “DPMS”
    Option “XaaNoOffscreenPixmaps” “1”
EndSection

Section “Screen”
    Identifier “screen1”
    Device “device1”
    Monitor “monitor1”
    DefaultColorDepth 16
   
    Subsection “Display”
        Depth 8
        Modes “1024×768” “832×624” “800×600” “640×480” “480×360” “320×240”
    EndSubsection
   
    Subsection “Display”
        Depth 15
        Modes “1024×768” “832×624” “800×600” “640×480” “480×360” “320×240”
    EndSubsection
   
    Subsection “Display”
        Depth 16
        Modes “1024×768” “832×624” “800×600” “640×480” “480×360” “320×240”
    EndSubsection
   
    Subsection “Display”
        Depth 24
        Modes “1024×768” “832×624” “800×600” “640×480” “480×360” “320×240”
    EndSubsection
EndSection

Section “ServerLayout”
    Identifier “layout1”
    InputDevice “Keyboard1” “CoreKeyboard”
    InputDevice “Mouse1” “CorePointer”
    InputDevice “Mouse2” “SendCoreEvents”
    Screen “screen1”
EndSection
[/code]

Kako uopste namestiti temu iz emeralda da sljaka… probao emerald –replace ali nista ispise samo errore
[code]/root/.gtkrc-2.0:56: Clearlooks configuration option “menuitemstyle” is not supported and will be ignored.
/root/.gtkrc-2.0:57: Clearlooks configuration option “listviewitemstyle” is not supported and will be ignored.
/root/.gtkrc-2.0:58: Clearlooks configuration option “progressbarstyle” is not supported and will be ignored.
/usr/share/themes/Clearlooks/gtk-2.0/gtkrc:34: Invalid symbolic color ‘fg_color’
/usr/share/themes/Clearlooks/gtk-2.0/gtkrc:34: error: invalid identifier `fg_color’, expected valid identifier
[/code]

[blekiwajt]

probao i to…same again…ne vide se uopste medjusobno
ne znam zasto al proradilo sve….
hvala…bogu :))

[blekiwajt]

ma ne mrzi me da cackam ali sam vec i mecku iscackao i nista….
sherovano sve fino…mreza radi kada prebacim Win-to-Win ali kada sam u linuxu ne vidi nista
samba je konfigurisana, IP konfigurisani….
najbolje bi bilo kada bi nasao negde step-by-step uputstvo za sambu i podesavanje LAN-a mada kada udjem u Remote Places>Local Network ispise mi ovo “could not start process unable to create io-slave
klauncher said unknown protocol ‘lan’
kompletno mi je sve podeseno prema http://www.pclinuxonline.com/wiki/PCLinuxSamba093

[blekiwajt]

Ja bi uzo’ ovaj noviji RedHatEnterprise WS ali imam uno problemo…nema gde da ga kupim…onako kako mi srbi volimo na ulici dok idem na fax i sl…  he he…nema ga ovde u klubu…znaci buvljak varijanta 🙂

[blekiwajt]

da da lep je sistem…. O0
ali ipak cu da predjem na ovaj novi RedHat Enterprise….. :biggrin:

pokusao sam linuxdc++ a i za operu 9.1 mi treba ta boblioteka….jbg…build-vacu je from source…

Hvala

[blekiwajt]

vratio sam na stare drajvere preko failsafe-a pa cackam iz grafickog okruzenja…lepse je…
cisto da vidim da li mi radi 3d pokrenuo sam igricu G117 i odmah mi se monitor ugasio….znam da mi se bas ne gadjaju chipset na ploci i grafickoj ali sta ces….
sta je tu je, a znam da je bolje reseno kod novijih drajvera…
samo jos da ih instaliram…

uvek isto…poskidao sam i instalirao sve dosadasnje ATi drajvere i nista uvek isto…
pokusao sam da instaliram MESA 2:5.0.~  a imam neki MESA libmesagu1 i sl fajlove 12:6.0.5 instalirane
onda sam probao da instaliram MESA 2:5.0…. i trazi mi da upgradeujem kernel i da izbrisem sve zivo sto sam do sada instalirao…

ima li preporuka? ???

[blekiwajt]

thanks…posto sve sljaka osim drajvera za graf ali to je verovatno neki mali problemcic , nista ne diram…

[blekiwajt]

@ LYb
buni se tako sto nece da udje u lin eto vidis…
mozda neki konflikt sa starim drajverima
kada predje sa ekrana bootovanja na ekran login-a jednostavno ostane tu negde..nista mi ne prikazuje..
…samo crni ekran na monitoru….Bootujem preko “failsafe” i ukljucim XFdrake i ispodesavam monitor i ostalo i smanjim rezoluciju na 800×600 na 24bit io5 nista…pustim test koji kaze da je doslo do errora i daje savet da izmenim neke parametre a ja ih sve vec izmenio…

pokusao sam da deinstaliram sa #
sh fglrx-uninstall.sh
u usr/share/fglrx direktorijumu
ali kod mene nema nigde fglrx dir-a

pozdravi iz shitty windowsa…

[blekiwajt]

ne vidi mi graficku skroz. ovo mi pise u ATI Control Panelu:
Skinuo sam najnovije drajvere sa sajta i ne mogu das ih instaliram nikako….pravljeni su izgleda samo za x86 64bitnu platformu… nece nesto ni jedan da instalira…
standardno instaliram:
[code]
chmode a+x blablabla.run
pa ./blabla.run[/code] i trebalo da krene ali nista
ovo je ponudjeno da skinem:
automated installer za x86 i x86_64 .run
i samo drajveri za xorg i xfree  *.rpm

[blekiwajt]

ja imam V3 i majke ti kako si instalirao moto4lin i p2k ja ne mogu nikako…..
ono standardno ./configure, make, make install….ne ide nesto…
ja sam fleshovao mob u windowsu ali kako koristim linux hocu ovde da ga instaliram…
odradi configure a make nece,posle kucanja make ispise mi ovo:
[code]make  all-recursive
make[1]: Entering directory `/home/mile/Downloads/p2kmoto-0.1′
Making all in src
make[2]: Entering directory `/home/mile/Downloads/p2kmoto-0.1/src’
/bin/sh ../libtool –mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -g -O2 -c p2kmoto.c
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -c p2kmoto.c  -fPIC -DPIC -o .libs/p2kmoto.o
p2kmoto.c:26:17: usb.h: No such file or directory
p2kmoto.c:95: error: syntax error before ‘*’ token
p2kmoto.c:95: warning: data definition has no type or storage class
p2kmoto.c: In function `p2k_getDevList’:
p2kmoto.c:159: error: `usb_dev_handle’ undeclared (first use in this function)
p2kmoto.c:159: error: (Each undeclared identifier is reported only once
p2kmoto.c:159: error: for each function it appears in.)
p2kmoto.c:159: error: `udev’ undeclared (first use in this function)
p2kmoto.c:171: error: `usb_busses’ undeclared (first use in this function)
p2kmoto.c:171: error: dereferencing pointer to incomplete type
p2kmoto.c:172: error: dereferencing pointer to incomplete type
p2kmoto.c:172: error: dereferencing pointer to incomplete type
p2kmoto.c:179: error: dereferencing pointer to incomplete type
p2kmoto.c:181: error: dereferencing pointer to incomplete type
p2kmoto.c:181: error: dereferencing pointer to incomplete type
p2kmoto.c:183: error: dereferencing pointer to incomplete type
p2kmoto.c:184: error: dereferencing pointer to incomplete type
p2kmoto.c:191: error: dereferencing pointer to incomplete type
p2kmoto.c:192: error: dereferencing pointer to incomplete type
p2kmoto.c:195: error: dereferencing pointer to incomplete type
p2kmoto.c:196: error: dereferencing pointer to incomplete type
p2kmoto.c: In function `p2k_findDevice’:
p2kmoto.c:222: warning: assignment makes pointer from integer without a cast
p2kmoto.c:224: error: dereferencing pointer to incomplete type
p2kmoto.c:228: error: dereferencing pointer to incomplete type
p2kmoto.c:228: error: dereferencing pointer to incomplete type
p2kmoto.c:229: error: dereferencing pointer to incomplete type
p2kmoto.c:229: error: dereferencing pointer to incomplete type
p2kmoto.c: In function `p2k_connect’:
p2kmoto.c:254: warning: assignment makes pointer from integer without a cast
p2kmoto.c: At top level:
p2kmoto.c:314: error: syntax error before “usb_dev_handle”
p2kmoto.c: In function `p2k_sendControl’:
p2kmoto.c:318: error: `dev’ undeclared (first use in this function)
p2kmoto.c:327: error: `requesttype’ undeclared (first use in this function)
p2kmoto.c:327: error: `request’ undeclared (first use in this function)
p2kmoto.c:327: error: `value’ undeclared (first use in this function)
p2kmoto.c:327: error: `bytes’ undeclared (first use in this function)
p2kmoto.c:327: error: `size’ undeclared (first use in this function)
p2kmoto.c:327: error: `timeout’ undeclared (first use in this function)
make[2]: *** [p2kmoto.lo] Error 1
make[2]: Leaving directory `/home/mile/Downloads/p2kmoto-0.1/src’
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/mile/Downloads/p2kmoto-0.1′
make: *** [all-recursive-am] Error 2
[/code]

moto4lin je ver 0.3 a p2k 0.1rc1

[Autor]

Članci