A little beryl problem

[dukenukem_4d]

jedno glupo pitanje (mozda je off,ali moze da bude i ontopic)
cemu sluzi device wacom  u xorg.conf na (k)ubuntu-u? nije li visak?

INLINE odgovor na donji post:
a koliko % ljudi ovde od onih % ljudi koji koriste linux
uopste imaju tablet PC?
mislim verovatno svi crnci u africi to vec imaju (pa je zato u Ubuntu)
samo mi nemamo ….

[BrokeBody]

Sluzi za TabletPC. Google, ako te vise zanima.

[stanko]

To nigde nisi naveo, osim ako ona komanda koju si ostavio ne ostavlja ARGBGLXVisuals u svim sekcijama?

Ona komanda koju sam ostavio upisuje ARGBGLXVisuals samo u sekciju Screen.

[sysctl]

Mozda malo glupo pitanje, ali da li si probao [tt]emerald –replace[/tt] kada nema bordera. I sta kaze [tt]ps -ae | grep emerald[/tt] kad je beryl startovan.

[WebWolf]

Mh… znate sta. Ja tek sad kapiram da sam sasvim zadovoljan onim “defaultnim” Ubuntu efektima. Jer sad vidim da on ima sve sto mi je potrebno od beryla, osim toga sto ne znam kako da promenim one slike na gornjoj i donjoj stranici kocke, i da recimo ponekad umesto desktopa stavim njih preko celog ekrana. Njih ne prihvata. Zna neko kako to da radim. Inace, to sve radi ok, a beryl i dalje zeza.

[dukenukem_4d]

ako ovo i dalje nije reseno..
moguce resenje : prebaciti x-server u 32 bita
(objasnjene: na 16 bita sa gf4mx kod mene isto ne crta bordere ,title bar
na pclos dok u 32bita crta ???)

[Neky]

jel zna neko da li beryl radi na slabijim graf od gf4mx440?
npr gf2mx ili radeon 7500 ?

Kod mene na GF2 MX400 i sa 256DDRa radi, mada ne baš najsjajnije kada upalim par prozora, ali može da se podnese.

[blekiwajt]

ja imam problem sa Copizom isti slucaj nemam bordere i ne mogu da kucam dok je upaljen compiz + emerald

xorg.conf je ‘vaki:
[code]# File generated by XFdrake (rev 57713)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section “Files”
    # font server independent of the X server to render fonts.
    FontPath “unix/:-1”
   
    # minimal fonts to allow X to run without xfs
    FontPath “/usr/share/fonts/misc:unscaled”
EndSection

Section “Extensions”
    Option “Composite”
EndSection

Section “ServerFlags”
    #DontZap # disable (server abort)
    #DontZoom # disable / (resolution switching)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection

Section “Module”
    Load “dbe” # Double-Buffering Extension
    Load “v4l” # Video for Linux
    Load “extmod”
    Load “type1”
    Load “freetype”
    Load “glx” # 3D layer
    Load “dri” # direct rendering
EndSection

Section “InputDevice”
    Identifier “Keyboard1”
    Driver “kbd”
    Option “XkbModel” “pc105”
    Option “XkbLayout” “us”
    Option “XkbOptions” “compose:rwin”
EndSection

Section “InputDevice”
    Identifier “Mouse1”
    Driver “mouse”
    Option “Protocol” “ExplorerPS/2”
    Option “Device” “/dev/mouse”
EndSection

Section “InputDevice”
    Identifier “Mouse2”
    Driver “evdev”
    Option “product” “0xc040”
    Option “vendor” “0x046d”
    Option “HWheelRelativeAxisButtons” “7 6”
EndSection

Section “Monitor”
    Identifier “monitor1”
    VendorName “Generic”
    ModelName “1024×768 @ 60 Hz”
    HorizSync 31.5-48.5
    VertRefresh 50-70
   
    # TV fullscreen mode or DVD fullscreen output.
    # 768×576 @ 79 Hz, 50 kHz hsync
    ModeLine “768×576”    50.00  768  832  846 1000  576  590  595  630
   
    # 768×576 @ 100 Hz, 61.6 kHz hsync
    ModeLine “768×576”    63.07  768  800  960 1024  576  578  590  616
EndSection

Section “Device”
    Identifier “device1”
    VendorName “ATI Technologies Inc.”
    BoardName “ATI Radeon (fglrx)”
    Driver “ati”
    Option “DPMS”
    Option “XaaNoOffscreenPixmaps” “1”
EndSection

Section “Screen”
    Identifier “screen1”
    Device “device1”
    Monitor “monitor1”
    DefaultColorDepth 16
   
    Subsection “Display”
        Depth 8
        Modes “1024×768” “832×624” “800×600” “640×480” “480×360” “320×240”
    EndSubsection
   
    Subsection “Display”
        Depth 15
        Modes “1024×768” “832×624” “800×600” “640×480” “480×360” “320×240”
    EndSubsection
   
    Subsection “Display”
        Depth 16
        Modes “1024×768” “832×624” “800×600” “640×480” “480×360” “320×240”
    EndSubsection
   
    Subsection “Display”
        Depth 24
        Modes “1024×768” “832×624” “800×600” “640×480” “480×360” “320×240”
    EndSubsection
EndSection

Section “ServerLayout”
    Identifier “layout1”
    InputDevice “Keyboard1” “CoreKeyboard”
    InputDevice “Mouse1” “CorePointer”
    InputDevice “Mouse2” “SendCoreEvents”
    Screen “screen1”
EndSection
[/code]

Kako uopste namestiti temu iz emeralda da sljaka… probao emerald –replace ali nista ispise samo errore
[code]/root/.gtkrc-2.0:56: Clearlooks configuration option “menuitemstyle” is not supported and will be ignored.
/root/.gtkrc-2.0:57: Clearlooks configuration option “listviewitemstyle” is not supported and will be ignored.
/root/.gtkrc-2.0:58: Clearlooks configuration option “progressbarstyle” is not supported and will be ignored.
/usr/share/themes/Clearlooks/gtk-2.0/gtkrc:34: Invalid symbolic color ‘fg_color’
/usr/share/themes/Clearlooks/gtk-2.0/gtkrc:34: error: invalid identifier `fg_color’, expected valid identifier
[/code]

[dukenukem_4d]

DefaultColorDepth 16
probaj ovo da bude
  DefaultColorDepth 24  (ili 32)
(mada ne znam za ati ali , ovako je funkcionisalo na gf4 mx)

[Anonimni]

najlaksi nacin za drajvere

nadji i skini envy
sam ti skine i podesi sve drajvere.odlicna stvar

[Autor]

Članci