- This topic has 59 одговора, 14 гласова, and was last updated 14 years, 8 months раније by
.
-
Чланци
-
Ili koristite krbulju od OS-a da vam pokrece lap. 🙂
Zavisi iz kog ugla vam vise odgovara da gledate.Evo log-a prilikom podizanja X-a
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the “xorg” product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux yakarutu 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
Build Date: 04 September 2009 03:37:03PMBefore reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (–) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Fri Sep 18 13:39:40 2009
(==) Using config file: “/etc/X11/xorg.conf”
(==) ServerLayout “X.org Configured”
(**) |–>Screen “Screen0” (0)
(**) | |–>Monitor “Monitor0”
(**) | |–>Device “Card0”
(**) |–>Input Device “Mouse0”
(**) |–>Input Device “Keyboard0”
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory “/usr/share/fonts/Type1” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/share/fonts/Type1” does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
built-ins
(**) ModulePath set to “/usr/lib/xorg/modules”
(WW) AllowEmptyInput is on, devices using drivers ‘kbd’, ‘mouse’ or ‘vmmouse’ will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xec0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(–) using VT number 7(–) PCI:*(0:1:5:0) 1002:9612:103c:308c ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0x80000000/268435456, 0x94300000/65536, 0x94200000/1048576, I/O @ 0x00005000/256
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[24] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[30] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[31] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[32] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[33] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[34] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[35] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
(II) “extmod” will be loaded. This was enabled by default and also specified in the config file.
(II) “dbe” will be loaded. This was enabled by default and also specified in the config file.
(II) “glx” will be loaded. This was enabled by default and also specified in the config file.
(II) “record” will be loaded. This was enabled by default and also specified in the config file.
(II) “dri” will be loaded. This was enabled by default and also specified in the config file.
(II) “dri2” will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor=”X.Org Foundation”
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor=”X.Org Foundation”
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor=”X.Org Foundation”
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor=”X.Org Foundation”
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: “dri2″
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor=”X.Org Foundation”
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor=”X.Org Foundation”
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “radeonhd”
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor=”AMD GPG”
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[24] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[30] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[31] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[32] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[33] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[34] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[35] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff – 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 – 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 – 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX[B]
[24] 0 0 0x000a0000 – 0x000affff (0x10000) MS[B]
[25] 0 0 0x000b0000 – 0x000b7fff (0x8000) MS[B]
[26] 0 0 0x000b8000 – 0x000bffff (0x8000) MS[B]
[27] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[29] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[30] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[31] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[32] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[33] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[34] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[35] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[36] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[37] -1 0 0x0000ffff – 0x0000ffff (0x1) IX[B]
[38] -1 0 0x00000000 – 0x00000000 (0x1) IX[B]
[39] 0 0 0x000003b0 – 0x000003bb (0xc) IS[B]
[40] 0 0 0x000003c0 – 0x000003df (0x20) IS[B]
(**) RADEONHD(0): Depth 24, (–) framebuffer bpp 32
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9612:0x103C:0x308C.
If – and only if – your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9612:0x103C:0x308C:
and *please* describe the problems you are seeing
in your message.
(–) RADEONHD(0): Detected an RS780 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0x94300000 to 0xb7b1d000 (size 0x00010000)
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x308c
IOBaseAddress: 0x5000
Filename: BR33064.bin
BIOS Bootup Message:
HP_Volna RS780M DDR2 200e/500m(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(–) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEONHD(0): Default Engine Clock: 500000
(II) RADEONHD(0): Default Memory Clock: 400000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 14320
(II) RADEONHD(0): Direct rendering not officially supported on R600 and up
(II) Loading sub module “i2c”
(II) LoadModule: “i2c”
(II) Module “i2c” already built-in
(II) RADEONHD(0): Reference Clock: 14320
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus “RHD I2C line 0” initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus “RHD I2C line 1” initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus “RHD I2C line 2” initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus “RHD I2C line 3” initialized.
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”
(II) Module “ddc” already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 14320
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, “VGA CRT1”, RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, “LVDS LCD1”, RHD_DDC_1, RHD_HPD_NONE, { RHD_OUTPUT_KLDSKP_LVTMA, RHD_OUTPUT_NONE } }
(–) RADEONHD(0): Attaching Output DAC A to Connector VGA 1
(II) RADEONHD(0): LVDS FPDI: 0x1
(II) RADEONHD(0): LVDS Duallink: 0x0
(II) RADEONHD(0): LVDS Grey Level: 0x3
(II) RADEONHD(0): LVDS SEQ Dig onto DE: 30
(II) RADEONHD(0): LVDS SEQ DE to BL: 360
(II) RADEONHD(0): LVDS Off Delay: 500
(II) RADEONHD(0): LVDS 24Bit: 0x0
(II) RADEONHD(0): LVDS Spatial Dither : 0x0
(II) RADEONHD(0): LVDS Temporal Dither : 0x1
(–) RADEONHD(0): Attaching Output UNIPHY_KLDSKP_LVTMA to Connector PANEL
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A
(II) RADEONHD(0): RandR: Adding RRoutput PANEL for Output UNIPHY_KLDSKP_LVTMA
(II) RADEONHD(0): Output VGA_1 using monitor section Monitor0
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): Output PANEL has no monitor section
(II) RADEONHD(0): Setting UNIPHY_KLDSKP_LVTMA to incoherent
(II) RADEONHD(0): I2C device “RHD I2C line 1:E-EDID segment register” registered at address 0x60.
(II) RADEONHD(0): I2C device “RHD I2C line 1:ddc2” registered at address 0xA0.
(II) RADEONHD(0): EDID data for LVDS Panel
(II) RADEONHD(0): Manufacturer: AUO Model: 20ec Serial#: 0
(II) RADEONHD(0): Year: 2008 Week: 1
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 34 vert.: 19
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): No DPMS capabilities specified
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.610 redY: 0.353 greenX: 0.329 greenY: 0.616
(II) RADEONHD(0): blueX: 0.149 blueY: 0.103 whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Manufacturer’s mask: 0
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 69.3 MHz Image Size: 344 x 193 mm
(II) RADEONHD(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1433 h_border: 0
(II) RADEONHD(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
(WW) RADEONHD(0): Unknown vendor-specific block f
(II) RADEONHD(0): AUO
(II) RADEONHD(0): B156XW02 V0
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff0006afec2000000000
(II) RADEONHD(0): 01120103802213780a57559c5a549d26
(II) RADEONHD(0): 1a505400000001010101010101010101
(II) RADEONHD(0): 010101010101121b5643500026303020
(II) RADEONHD(0): 340058c1100000180000000f00000000
(II) RADEONHD(0): 00000000000000000020000000fe0041
(II) RADEONHD(0): 554f0a202020202020202020000000fe
(II) RADEONHD(0): 004231353658573032205630200a0046
(II) RADEONHD(0): Found native mode: Modeline “1366×768” 69.30 1366 1414 1446 1433 768 771 775 806
(EE) RADEONHD(0): Native mode doesn’t validate: deleting
(II) RADEONHD(0): Output VGA_1 disconnected
(II) RADEONHD(0): Output PANEL connected
(WW) RADEONHD(0): Unable to find initial modes
(EE) RADEONHD(0): Output PANEL enabled but has no modes
(EE) RADEONHD(0): RandR: No valid modes. Disabling RandR support.
(II) RADEONHD(0): Setting UNIPHY_KLDSKP_LVTMA to incoherent
(II) RADEONHD(0): EDID data for LVDS Panel
(II) RADEONHD(0): Manufacturer: AUO Model: 20ec Serial#: 0
(II) RADEONHD(0): Year: 2008 Week: 1
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 34 vert.: 19
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): No DPMS capabilities specified
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.610 redY: 0.353 greenX: 0.329 greenY: 0.616
(II) RADEONHD(0): blueX: 0.149 blueY: 0.103 whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Manufacturer’s mask: 0
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 69.3 MHz Image Size: 344 x 193 mm
(II) RADEONHD(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1433 h_border: 0
(II) RADEONHD(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
(WW) RADEONHD(0): Unknown vendor-specific block f
(II) RADEONHD(0): AUO
(II) RADEONHD(0): B156XW02 V0
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff0006afec2000000000
(II) RADEONHD(0): 01120103802213780a57559c5a549d26
(II) RADEONHD(0): 1a505400000001010101010101010101
(II) RADEONHD(0): 010101010101121b5643500026303020
(II) RADEONHD(0): 340058c1100000180000000f00000000
(II) RADEONHD(0): 00000000000000000020000000fe0041
(II) RADEONHD(0): 554f0a202020202020202020000000fe
(II) RADEONHD(0): 004231353658573032205630200a0046
(II) RADEONHD(0): Mapping DIG2 encoder to KLDSKP_LVTMA
(II) RADEONHD(0): Crtc[0]: found native mode from Monitor[LVDS Panel]: Modeline “1366×768” 69.30 1366 1414 1446 1433 768 771 775 806
(II) RADEONHD(0): Connector “PANEL” uses Monitor “LVDS Panel”:
Bandwidth: 69MHz
Horizontal timing:
48.4 – 48.4kHz
Vertical timing:
60.0 – 60.0Hz
DPI: 102×103
Allows reduced blanking.
Uses Fixed Modes.
Attached modes:
Modeline “1366×768” 69.30 1366 1414 1446 1433 768 771 775 806
(EE) RADEONHD(0): Crtc[0]: scaled mode invalid.
(WW) RADEONHD(0): A Monitor section has been specified in the config file.
This might badly affect mode validation, and might make X fail.
Unless this section is absolutely necessary, comment out the line
Monitor “Monitor0”
from the Screen section in your config file.
(II) RADEONHD(0): Listing modesetting layout:CRTC 1: tied to PLL 1 and LUT A:
Outputs: UNIPHY_KLDSKP_LVTMA (PANEL)CRTC 2: unused
Unused Outputs: DAC A
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Validating Fixed Modes from Monitor “LVDS Panel”
on Connector “PANEL”
(II) RADEONHD(0): Rejected mode “1366×768” (1366×768:69.3Mhz): illegal horizontal timings
(EE) RADEONHD(0): No valid modes found
(II) RADEONHD(0): Destroying DAC A
(II) RADEONHD(0): Destroying UNIPHY_KLDSKP_LVTMA
(II) RADEONHD(0): I2C bus “RHD I2C line 0” removed.
(II) RADEONHD(0): I2C device “RHD I2C line 1:ddc2” removed.
(II) RADEONHD(0): I2C device “RHD I2C line 1:E-EDID segment register” removed.
(II) RADEONHD(0): I2C bus “RHD I2C line 1” removed.
(II) RADEONHD(0): I2C bus “RHD I2C line 2” removed.
(II) RADEONHD(0): I2C bus “RHD I2C line 3” removed.
(II) UnloadModule: “radeonhd”
(EE) Screen(s) found, but none have a usable configuration.Fatal server error:
no screens foundPlease consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at “/var/log/Xorg.0.log” for additional information.Dakle covek bi zakljucio da probleme pravi nepotpuna sekcija “Monitor”
Medjutim koliko ja znam za LCD monitor uopste nije potrebna ta sekcija,tek laptop da ne pominjem(jer Xorg cita ddc vrednosti iz samog monitora i po tome odredjuje paramtere),cak se u ovom logu preporucuje da se komentuje sto sam i uradio,ali nista se nije promenilo
Xorg se medjutim podize kada uklonim xorg.conf ali je tada rezolucija neodgovarajuca,a probao sam i NoDDC parametar sa xorg.conf ali nista-napominjem da sam xorg.conf generisao sa Xorg -configure
Sa vesom naravno radi sve dobro
Dakle da cujem sugestije,plus mi je potrebna pomoc oko acpi-ja-dakle probao sam kernel 2.6.31 iz Arch testing repoa i sada ne samo sto nece da se podigne sa acpi-jem vec zakuca i kod udev ucitavanja-veselje nema sta,tako da sam se vratio na prethodni kernel
Mislim radi sa acpi=off ali to mi nije preterano od pomoci jer onda nema nista od naprednog power managmenta bez koga i nema smisla koristiti laptopok koji je drjaver na ubuntu u stvari ??? isto radeonhd ili ne
(II) RADEONHD(0): Rejected mode “1366×768” (1366×768:69.3Mhz): illegal horizontal timings
ako mogu sa ubuntu da se pročitaju ti tajminzi i da se ubaci u xorg
(ako ubuntu ima radeonhd ili nema )druga ideja je da se pogleda i uporede .config među distribucijama
treća ideja je da se potraži custom DSDT (ako je acpi problem uopšte u pitanju)
i ako je taj projekat još uvek aktivan uopšte ??? ili da se napravičetvrta ideja je da se upotrebi nešto između acpi=off i acpi=full
ovo sam još našao
http://ubuntuforums.org/showthread.php?t=1209888
http://notebookblog.cz/technika/zkusenosti-a-reklamace/linux-mint-na-hp-compaq-615/
(btw jel rade još uvek alsu uopšte ??? ne piše d aima rc verzija na alsa wiki)Jesi li probao radeon drajver tj. da li ga uopste imas instaliranog? Cisto da vidis kako stvari stoje sa njim… Takodje, koliko je meni poznato, ako vec hoces sam da proslijedis parametre X-u, preporuceno je dopisivanje samo relevantnih dijelova. U tvom slucaju to bi bila sekcija “Monitor” i vjerovatno “Screen”.
Skoro sam procitao da Arch ubacuje LTS kernel. Doduse optimizovan je za serversku upotrebu, ali mozda da pokusas sa njim (ako uopste ima, mozda su samo planov u pitanjui). Meni se isto zakucavao kod pokretanja udev-a, kad je u pitanju onaj problem sto sam naveo u prethodnom postu. Na tvom mjestu ja bih iskompajlirao jedan vanilla kernel, pa da vidim sta ce biti. Cisto da eliminisemo da neki patch ne brlja i sl.
Ako se odlucis za tu opciju, ovo ce ti svakako biti od pomoci:
http://kmuto.jp/debian/hcl/%5B/url%5D
http://62.3.120.141/~pappy/seeds/32_bit/vanilla/%5B/url%5Dda li imaš više od 2 giga rama , izgleda ima neki bios isssue sa tim nekim čipovima
http://wiki.x.org/wiki/radeonhd#head-d0cfd39d1b149a43f0c1d862f21f4b3ddcb43ae2
[size=150]10.7. The driver doesn’t start on my laptop. I have 4GB of main memory, BTW[/size]
Some machines with M72, M83, and possibly other IGP chipsets (especially laptops) with more than 2GB of memory exhibit this BIOS issue. Apparently, the MTRR table is not setup correctly. One possibility is to reduce the amount of RAM, the more reasonable (but only little tested so far) alternative is to enable the MTRR sanitizer in the kernel.
[code]
grep “CONFIG_MTRR” /boot/config*
[/code]
to check whether CONFIG_MTRR is active for your kernel. If it is, boot with
[code]
enable_mtrr_cleanup mtrr_spare_reg_nr=0
[/code]
, otherwise you have to recompile your kernel with this option enabled.ili nešto u vezi kernel mode setting ?
Auh,auh-ne pada mi na pamet da kompajliram bilo sta,sto se mene tice ti dani su na linux-u proslost :p
Elem duke je dao linak koji ima hint kako osposobiti zvuk u Ubuntu-s obzirom da mi u Ubuntu-u prakticno radi sve sem zvuka,probacu sa njime 😉
Arch Linux mi se zakuca dakle na mestu gde pise “loading ACPI modules” pojavi se crni ekran i to tako stoji dok rucno ne ugasim laptop,dakle zakuca-napominjem da je BIOS flesovan na najnoviju verziju 😉
Ja zaista ne znam sta je-zanimljivo je primetiti da Ubuntu ima 2.6.28 kernel,isto tako cini mi se i PCLOS,a Open SISE ima kernel 2.6.27 i acpi se ucitava bez problema-dakle logickim razmisljanjem dolazim do zakljucka da zajeb vrsi ili serija kernela 2.6.3x ili taj konkretni default kernel koji ide uz Arch sto je verovatniji slucaj 😉važi , no compile 😀 ako je ovo poslednje u pitanju tačka 10.7
mislim da je CONFIG_MTRR uključena u bilo kojem distrou O0
[code]
~# grep “CONFIG_MTRR” /usr/src/linux-2.6.27.8/.config
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
[/code]
znači ova boot opcija neka da se ubaci?za acpi mora se još domišljamo šta je :-
ako ima i za to neki boot parametar…kako osposobiti zvuk u Ubuntu-s obzirom da mi u Ubuntu-u prakticno radi sve sem zvuka
https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/61903
Мораш бити пријављен да би поставио коментар у овој теми.