Latinica

[Neky]

Zamalo da reinstaliram ponovo… Znači kad god se logujem (iz tekstualnog režima, ne može drugačije) dobije jedno pet (EE) erora oko nvidia modula. Iz drugog puta uspem, ali onda aplikacije izazivaju SIGSEGV i slično, puca ksplash, kicker i ostala svita. Posle par puta je sve dobro, sad sam nekako uspeo da se logujem i sad radi  ??? Rekao bih da je Beryl zaslužan za ovo, i danas sam ga probao a evo i malopre.

Ništa Strikane (  🙂 ), guraću PCLOS dok ne izađe Slax. Sviđa mi se ovaj distro…sve je tako lako majku mu. Klik-klik-klik-gotovooooo.

[Neky]

danas sam ubio PCLoS, upravo reinstaliram 🙂 bas nemam srece ovih dana…

[Neky]

na sva pitanja sam tu odgovarao sa Yes ali sam kasnije nešto njak’o oko kernela, nisam uključio VESA drajver tako da nisam video šta je tačno pisalo, ali Slackware sam mogao samo sa CDa da podignem, onda je radio. Tu sam video da nema učitanih modula, niti sam mogao da ih učitam, a zvuk npr. nije radio. S obzirom da sam sinoć reinstalirao Slackware, popizdeo sam i rekao sebi “e nećeš više” i to je to. Sad sam na PCLinuxOSu i zadovoljan sam svime, bar dok ne izađe Slax 7, onda ću razmisliti.

[Neky]

uspeo sam, ali na PCLoSu. Senzori su instalirani, gkrellm ih vidi i sve radi. Oleeeeeeeej.

[Neky]

nije bilo zvuka, ni jednog učitanog modula, nisam mogao ni da ih učitam itd….sad sam na PCLoSu i prvi utisak je kul, videću za dalje. Prilično je lak za upotrebu.

[Neky]

ubio sam Slackware ovime, sada pisem sa PCLOSa i ono, nije lose, ali nisam navikao da nemam ni qt instaliran. Uglavnom, probao sam da ucitam coretemp modul ali ga nije bilo, a za i2c-core je javljao gresku “bad module format” tako da nemam pojma… i2c-viapro je bio ucitan, kao i eeprom. Reinstaliracu Slackware sutra pa cu probati opet…do tada sansu dobija Slax 6 RC7.

[Neky]

evo izlaz od “sensors-detect” komande

[code]root@darkstar:~# sensors-detect
# sensors-detect revision 4348 (2007-03-18 02:45:21 -0700)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you’re doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters…
Use driver `i2c-viapro’ for device 0000:00:11.0: VIA Technologies VT8237A South Bridge

We will now try to load each adapter module in turn.
Module `i2c-viapro’ already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev’ to be loaded.
Do you want to load `i2c-dev’ now? (YES/no): y
WARNING: Error inserting i2c_core (/lib/modules/2.6.21.5-smp/kernel/drivers/i2c/i2c-core.ko): Invalid module format
Module loaded successfully.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Next adapter: NVIDIA i2c adapter 2 at 1:00.0 (i2c-3)
Do you want to scan it? (YES/no/selectively): y

Next adapter: NVIDIA i2c adapter 1 at 1:00.0 (i2c-2)
Do you want to scan it? (YES/no/selectively): y

Next adapter: NVIDIA i2c adapter 0 at 1:00.0 (i2c-1)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033’…                    No
Probing for `Analog Devices ADM1034’…                    No
Probing for `SPD EEPROM’…                                No
Probing for `EDID EEPROM’…                                Success!
    (confidence 8, driver `eeprom’), other addresses: 0x51 0x52 0x53 0x54 0x55 0x56 0x57
Probing for `Maxim MAX6900’…                              No
Client found at address 0x51
Probing for `Analog Devices ADM1033’…                    No
Probing for `Analog Devices ADM1034’…                    No
Probing for `SPD EEPROM’…                                No
Client found at address 0x52
Probing for `Analog Devices ADM1033’…                    No
Probing for `Analog Devices ADM1034’…                    No
Probing for `SPD EEPROM’…                                No
Client found at address 0x53
Probing for `Analog Devices ADM1033’…                    No
Probing for `Analog Devices ADM1034’…                    No
Probing for `SPD EEPROM’…                                No
Client found at address 0x54
Probing for `SPD EEPROM’…                                No
Client found at address 0x55
Probing for `SPD EEPROM’…                                No
Client found at address 0x56
Probing for `SPD EEPROM’…                                No
Client found at address 0x57
Probing for `SPD EEPROM’…                                No
Probing for `Sony Vaio EEPROM’…                          No

Next adapter: SMBus Via Pro adapter at 0400 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Handled by driver `eeprom’ (already loaded), chip type `eeprom’

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78′ at 0x290…      No
Probing for `National Semiconductor LM78-J’ at 0x290…    No
Probing for `National Semiconductor LM79′ at 0x290…      No
Probing for `Winbond W83781D’ at 0x290…                  No
Probing for `Winbond W83782D’ at 0x290…                  No
Probing for `Silicon Integrated Systems SIS5595’…        No
Probing for `VIA VT82C686 Integrated Sensors’…            No
Probing for `VIA VT8231 Integrated Sensors’…              No
Probing for `IPMI BMC KCS’ at 0xca0…                      No
Probing for `IPMI BMC SMIC’ at 0xca8…                    No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE’…                                      No
Trying family `National Semiconductor’…                  No
Trying family `SMSC’…                                    No
Trying family `VIA/Winbond/Fintek’…                      Yes
Found `Winbond W83697HF Super IO Sensors’                  Success!
    (address 0x290, driver `w83627hf’)
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE’…                                      No
Trying family `National Semiconductor’…                  No
Trying family `SMSC’…                                    No
Trying family `VIA/Winbond/Fintek’…                      No

Some CPUs or memory controllers may also contain embedded sensors.
Do you want to scan for them? (YES/no): y
AMD K8 thermal sensors…                                  No
Intel Core family thermal sensor…                        Success!
    (driver `coretemp’)
Intel AMB FB-DIMM thermal sensor…                        No

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `eeprom’ (should be inserted):
  Detects correctly:
  * Bus `NVIDIA i2c adapter 0 at 1:00.0′
    Busdriver `UNKNOWN’, I2C address 0x50 (and 0x51 0x52 0x53 0x54 0x55 0x56 0x57)
    Chip `EDID EEPROM’ (confidence: 8)
  * Bus `SMBus Via Pro adapter at 0400′
    Busdriver `i2c-viapro’, I2C address 0x50
    Chip `eeprom’ (confidence: 6)

  EEPROMs are *NOT* sensors! They are data storage chips commonly
  found on memory modules (SPD), in monitors (EDID), or in some
  laptops, for example.

Driver `w83627hf’ (should be inserted):
  Detects correctly:
  * ISA bus, address 0x290
    Chip `Winbond W83697HF Super IO Sensors’ (confidence: 9)

Driver `coretemp’ (should be inserted):
  Detects correctly:
  * Chip `Intel Core family thermal sensor’ (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue:

To make the sensors modules behave correctly, add these lines to
/etc/modules.conf:

#—-cut here—-
# I2C module options
alias char-major-89 i2c-dev
#—-cut here—-

To load everything that is needed, add this to some /etc/rc* file:

#—-cut here—-
# I2C adapter drivers
# modprobe unknown adapter NVIDIA i2c adapter 0 at 1:00.0
# modprobe unknown adapter NVIDIA i2c adapter 1 at 1:00.0
# modprobe unknown adapter NVIDIA i2c adapter 2 at 1:00.0
modprobe i2c-viapro
# Chip drivers
modprobe eeprom
modprobe w83627hf
# Warning: the required module coretemp is not currently installed
# on your system. For status of 2.6 kernel ports check
# http://www.lm-sensors.org/wiki/Devices. If driver is built
# into the kernel, or unavailable, comment out the following line.
modprobe coretemp
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#—-cut here—-

If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones! You really
should try these commands right now to make sure everything is
working properly. Monitoring programs won’t work until the needed
modules are loaded.

Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): y[/code]

a evo ga “lsmod”
[code]
root@darkstar:~# lsmod
Module                  Size  Used by
i2c_dev                9732  0
ipv6                  254496  10
sg                    30364  0
eeprom                  9616  0
snd_seq_dummy          6788  0
snd_seq_oss            32896  0
snd_seq_midi_event    10112  1 snd_seq_oss
snd_seq                50640  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device        10508  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            42784  0
snd_mixer_oss          18048  1 snd_pcm_oss
capability              7304  0
commoncap              9344  1 capability
lp                    13736  0
parport_pc            27812  1
parport                34760  2 lp,parport_pc
pcspkr                  6528  0
psmouse                39048  0
snd_hda_intel          20248  5
snd_hda_codec        209152  1 snd_hda_intel
snd_pcm                72068  4 snd_pcm_oss,snd_hda_intel,snd_hda_codec
nvidia              4710100  22
snd_timer              22532  3 snd_seq,snd_pcm
snd                    47204  17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore              9824  1 snd
snd_page_alloc        11528  2 snd_hda_intel,snd_pcm
via_rhine              24968  0
mii                    8576  1 via_rhine
serio_raw              9220  0
via_agp                12160  1
agpgart                31432  2 nvidia,via_agp
shpchp                33172  0
i2c_viapro            11668  0
ata_generic            9220  0
evdev                  11904  1
pata_via              12164  0[/code]

[Neky]

E da, obavezno rekompajlujem za svoje potrebe. Btw stigao mi procesor danas, sve leti, Slackware leti, volim letenje i Slackwareeeeeeeeeeeeeeeeeeeeeee

[Neky]

I ja ovih dana lomim glavu oko 32 ili 64 bita i ne znam šta da radim. Imam instaliran i podešen Slackware već duže vreme i iskreno mi je žao da ga opet instaliram. E sad, ako je ubrzanje primetno, nema veze, srediću ga opet  😉

[Neky]

Alt+V je @. Ja inače imam čistokrvnu Genius-aka-400-din bez naših slova ali nije problem kucati na njoj.

[Autor]

Članci