Ћирилица

[mtm76]

ajd da i ja dodam nešto… MEncoder daje mnooogo bolji kvalitet slike kod hvatanja u mpeg4, jer koristi viskoko kvalitetni bicubic scale (zoom) filter… Filteri koje transcode koristi su užasno spori, pa je praktično i nemoguće ih koristiti kod hvatnja slike sa tv kartice… naravno, moguće he koristit opciju brzog skaliranja, ali kvalitet je primjetno niži, prvenstveno zbog toga što se korištenjem bicubic filtera (kod smanjivanja) eleminiše dobar broj smetnji (snijega na slici), što u nije slučaj kod fast skaliranja. A svake smetnje drastično smanjuju kompresibilnost… zato se, između ostalog, podrezuju rubovi slike…

a ovaj tvtime… on koristi uglavnom filtrere od DScaler-a (aplikacija sa Windows-a, vjerovatno najbolja kada je u pitnju kvlitet slike), ali pogledajte malo iskorištenost procesora, uvijek 100%, bez obzira na mašinu, jer se trudi izući maksimalan kvalitet slike… normalno moguće je isključiri neke filtere, ali zašto bi onda i koristio tvtime… meni recimo Mplayer na procesoru AthlonXP 2200+ koristi svega 15%, kada gledam u punoj rezoluciji koristeći linear blend filter… daje sasvim dobar kvalitet slike, koja se može još popraviti koristeći vrlo kvalitetne denoise filtere koje MPlayer posjeduje… i to da ne prelazi 50% iskorištenosti procesora…

Koristim kdetv i slika je jako usporena

za normalno gledanje ti treba procesor od minimum 600 MHz i grafička kartica spojena preko AGP 4x sučelja… ako ti ne radi dovoljno brzo ni sa jednom aplikacijum, vidi da li ti je aktivan AGP… ako koristiš 2D, vrlo je lako moguće da nije uključen, jer 2D može da radi i bez njega…
i da još mi nešto pade na pamet… YAST ima veeeliki bug što se tiče tv kartica… naime ne upisuje tačne podatke u /etc/modules.conf (ili modprobe.conf) za sve kartice… za moju Jatway karticu nikada nije to uradio kako treba, ngo sam ja to ručno upisivao… tako je bilo i u starijim verzijama, ali i isto i kada sam nakratko probao SUSE9.2, pa je moguće da je i to problem.

[mtm76]

DivX i XviD su različiti načini kodiranja i kompresije. FourCC podrazumeva 4 različita kodeka. Samom promenom zaglavlja jedino se player može naterati da koristi drugi kodek od data 4.

E šta odvali… 😉 i ostade živ. 🙂
FourCC = Four Character Code, iliti kod od 4 (heksadecimalna znaka), koji određuje koji će se codec koristiti, a može ih se koristiti mnoooogo više od 4.

Nema (uglavnom nikakvih) problema promijeniti xvid u divx5, ali promjena divx5 u xvid može napraviti probleme… (a i ne mora, ako se koristi libavcodec za dekodiranje)

[mtm76]

ALO brace i Sestre…STA SADA…
.Skoro nista NE RADI pod ATI 9200s i kernelom 4.3 tj mandrake 10.0…
El ima neko pametno resenje ???

drago mi je zbog tebe, tj. što si to odmah shvatio… 😉

Da bi koristio graficku karrtu moras naravno instalirati driver od ati-a

Ahaa… ima da ti prorade screensaver-i, a možda ćeš biti u stanju i da igraš tuxracer… nešto više od toga, zaboravi… pogotovo sa tom karticom, jer su performanse 2-3 puta lošije nego na windows-u…

[mtm76]

Uzmeš fino pa se registruješ, pa će biti 462… 😉

Linux user #377554

[mtm76]

e jesi zapeo za taj monitor… SHVATI DA SU SVI MONITORI PLUG ‘N’ PLAY i svi imaju isti generički drajver… nema veze bilo koji da spojiš… bitna je rezolucija i frekvencija… to što neka distribucija prepozna marku monitora, znači da automatski podesi maksimalnu rezoluciju i frekvenciju… na slacku ti to radiš ručno…
ajd skini drajver
fglrx_6_8_0-8.14.13-1.i386
pa deinstaliraj postojeći, i izbriši ručno folder /lib/modules/fglrx
pa onda instaliraj ponovo, pa onda
[code]# fglrxconfig

==============================================================================
ATI – FireGL – WORKSTATION GRAPHICS ACCELERATOR
==============================================================================

This program will create the ATI “xorg.conf” file
– based on your selections – for the following video cards…

– ATI Radeon 8500 / 9100
– ATI FireGL 8700 / 8800 / E1
– ATI FireGL T2
– ATI Radeon 9000
– ATI Radeon 9200
– ATI Radeon 9500
– ATI Radeon 9600
– ATI Radeon 9700
– ATI Radeon 9800
– ATI FireGL Z1 / X1 / X2
– ATI Mobility M9
– ATI Mobility FireGL 9000
– ATI Mobility M9PLUS
– ATI FireGL V3100 / V5100 / V7100

The “xorg.conf” file usually resides in /etc/X11.

Press [Enter] to continue, press ‘q’&[Enter] or [Ctrl]+’c’ to abort.

==============================================================================
Mouse
==============================================================================

Specify the mouse port type. Choose one from the following list:

1. Serial Port
2. PS/2 or USB with PS/2 protocol
3. Inport Bus

Enter the number for your port type: [2]

Specify the mouse model. Choose one from the following list:

1. PS/2 Mouse (X11 generic ps/2 mouse driver)
2. PS/2 Wheel Mouse (X11 generic ps/2 wheel mouse driver)
3. Microsoft Intellimouse (PS2)
4. Microsoft IntelliMouse Explorer (PS2)
5. Kensington ThinkingMouse (PS2)
6. Logitech MouseManPlus (PS2)
7. Alps Glidepoint PS/2 Touchpad
8. Genius NetMouse
9. Genius NetScroll

Enter the number for your mouse model: [2]

If your mouse has only two buttons, it is recommended that you enable
Emulate3Buttons.

Do you want to enable Emulate3Buttons (y/n)? [n]

Now give the full device name that the mouse is connected to, for example
/dev/tty00 or /dev/mouse or /dev/psaux (includes IBM Laptops).

Mouse device: [/dev/input/mice] /dev/mouse

==============================================================================
Keyboard
==============================================================================

Please select one of the following keyboard types that is the better
description of your keyboard. If nothing really matches,
choose 1 (Generic 101-key PC)

1. Generic 101-key PC
2. Generic 102-key (Intl) PC
3. Generic 104-key PC
4. Generic 105-key (Intl) PC
5. Dell 101-key PC
6. Everex STEPnote
7. Keytronic FlexPro
8. Microsoft Natural
9. Northgate OmniKey 101
10. Winbook Model XP5
11. Japanese 106-key
12. PC-98xx Series

Enter a number to choose the keyboard type: [1] 3

Please select the layout corresponding to your keyboard

1. U.S. English
2. U.S. English w/ISO9995-3
3. Belgian
4. Bulgarian
5. Canadian
6. Czechoslovakian
7. German
8. Swiss German
9. Danish
10. Spanish
11. Finnish
12. French
13. Swiss French
14. United Kingdom
15. Hungarian
16. Italian
17. Japanese
18. Norwegian

Press [Enter] for the next page or
enter the number for your keyboard layout country: 1

==============================================================================
FireGL Display Settings
==============================================================================

Quad Buffer Stereo (“Active Stereo”):

This driver does support Quad Buffer Stereo (“Active Stereo”)
in combination with a CRT monitor (refresh rate about 100 to 120 Hz)
and the appropiate stereo viewing subsystem hardware. For example, this can
be a shutter glasses system (infrared or wired) or an active
polarisation device paired with passive stereo polarization glasses.

Do you want to enable “Quad Buffer Stereo” (y/n)? [n]

==============================================================================
TV out Configuration
==============================================================================

Do you want to enable TV out (y/n)? [n]

==============================================================================
FireGL Screen Layout
==============================================================================

——————————————————————————
| Maximum resolution for OpenGL operation |
| |
| – R200 chip family (Radeon 8500-9100 Pro, FireGL 8700/8800/E1): |
| 2048×2048 |
| – R300 chip family (Radeon 9500-9700 Pro, FireGL T2/Z1/X1/X2): |
| 2560×2560 |
——————————————————————————

Choose configuration from the list below

1. Single Head (1 screen, second dark)
2. Laptop Mode (Ability to toggle between internal / external screen)
3. Clone Mode (2 screens – same content)
4. Big Desktop (2 screens – one framebuffer)
5. Dual Head (2 screens – two drivers)

Enter the number for your configuration: [1]

==============================================================================
Single Head selected
==============================================================================

==============================================================================
Monitor Settings
==============================================================================

Now we want to set the specifications of the monitor(s). The two critical
parameters are the vertical refresh rate, which is the rate at which the
the whole screen is refreshed, and most importantly the horizontal sync rate,
which is the rate at which scanlines are displayed.

The valid range for horizontal sync and vertical sync should be documented
in the manual of your monitor. If in doubt, check the monitor database
/usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there.

Press [Enter] to continue, press ‘q’&[Enter] or [Ctrl]+’c’ to abort.

You must indicate the horizontal sync range of your monitor. You can either
select one of the predefined ranges below that correspond to industry-
standard monitor types, or give a specific range.

It is VERY IMPORTANT that you do not specify a monitor type with a horizontal
sync range that is beyond the capabilities of your monitor. If in doubt,
choose a conservative setting.

hsync in kHz; monitor type with characteristic modes
1. 31.5 ; up to 640×480 @ 60 Hz (VGA)
2. 31.5 – 37.9; up to 800×600 @ 60 Hz (SVGA)
3. 31.5 – 48.4; up to 1024×768 @ 60 Hz (XGA)
4. 31.5 – 60.0; up to 1024×768 @ 75 Hz (XGA)
5. 31.5 – 68.7; up to 1024×768 @ 85 Hz (XGA)
6. 31.5 – 80.5; up to 1280×1024 @ 75 Hz (SXGA)
7. 31.5 – 91.1; up to 1280×1024 @ 85 Hz (SXGA)
8. Enter your own horizontal sync range

Enter your choice (1-8): [1] 3

You must indicate the vertical sync range of your monitor. You can either
select one of the predefined ranges below or give a specific range.

EVO TI FREKVENCIJE

1. 20 – 60 (e.g. slow scan flat panels with DVI cable)
2. 50 – 70 (VGA)
3. 60 – 75
4. 60 – 85
5. 60 – 100
6. Specify your own vertical sync range

Enter your choice: [1] 2

==============================================================================
Display Modes
==============================================================================

The default resolution that the server will start-up with will be the first
listed mode that can be supported by the monitor and card.
Currently it is set to:

“640×480” for 24-bit

Modes that cannot be supported due to monitor or clock constraints will
be automatically skipped by the server.

1. Change the modes for 24-bit (24-bit color)
2. The modes are OK, continue.

Enter your choice:
1

Select your modes from the following list:

EVO TI REZOLUCIJE

1 “640×480”
2 “800×600”
3 “1024×768”
4 “1152×864”
5 “1280×960”
6 “1280×1024”
7 “1400×1050”
8 “1600×1200”
9 “1792×1344”

Please list the digits and characters for the modes that you want to use.
For example, ‘632’ selects “1280×1024” “1024×768” “800×600”, with
the default mode of “1280×1024”.

Which modes do you want? 321

The default resolution that the server will start-up with will be the first
listed mode that can be supported by the monitor and card.
Currently it is set to:

“1024×768” “800×600” “640×480” for 24-bit

Modes that cannot be supported due to monitor or clock constraints will
be automatically skipped by the server.

1. Change the modes for 24-bit (24-bit color)
2. The modes are OK, continue.

Enter your choice: 2

You can have a virtual screen (desktop), which is screen area that is larger
than the physical screen and which is panned by moving the mouse to the edge
of the screen. The largest resolution in the modelist is used for any of the
listed resolution with less dimensions. Each color depth can have a
differently-sized virtual screen. Virtual screens resolutions are set
for each color depth separately.

Note: This graphics adapter will always select the maximum
x and y resolution as the default virtual desktop resolution.
This complies with general X11 specifications. see “man XF86Config”.

Do you want to use a virtual desktop where the dimensions are bigger
than your maximum x and y screen resolution? (y/n) [n]

==============================================================================
Direct Rendering Interface Restrictions
==============================================================================

Please specify which restriction sheme you want to implement:

1. no restrictions – any user has access to the OpenGL ICD
2. limited to group ‘users’ – only group members can access the OpenGL ICD
3. limited to group ‘root’ – only group members can access the OpenGL ICD
4. limited to group ‘video’ – only group members can access the OpenGL ICD
5. limited to group ‘dri’ – only group members can access the OpenGL ICD

Enter the number for your default user restrictions: [1]

==============================================================================
Application Profiles
==============================================================================

Please select application specific profile:

1. Default
2. Individual Configuration of Capabilities
3. Maya
4. SOFTIMAGE|XSI
5. SOFTIMAGE|3D
6. Houdini 4.0
7. Houdini 5.0
8. Houdini 5.5

Enter the number for your profile: [1]

==============================================================================
Advanced Graphics Features Settings
==============================================================================

Do you want to initialize xfree86-dga (y/n)? [n]

Do you want to export pseudo color visuals (y/n)? [n]

Do you want to synchronize buffer swaps
with the vertical sync signal (y/n)? [n]

==============================================================================
Full Scene Anti Aliasing (FSAA)
==============================================================================

Please select multi sample visuals you want to share:

1 = All (Visuals for 2,4 and 6 Samples per Pixel)
2 = Visuals for 2 Samples per Pixel
4 = Visuals for 4 Samples per Pixel
6 = Visuals for 6 Samples per Pixel

Please enter: [1]

Do you want to force multi sample visuals
for every OpenGL application? (y/n)? [n]

Disable FSAA Gamma (y/n)? [n]

Customize FSAA Multi Sample Position (y/n)? [n]

==============================================================================
Advanced OS Settings
==============================================================================

External AGPGART module:

It is possible (but not recommended) to turn off the usage of
built-in agp support of the provided fglrx kernel module and
use the external AGP GART module (agpgart.o) of the Linux kernel.
If you want to use the external module then ensure that it loads
prior to the drivers full startup. In order to manually load the
external agpgart module execute this on the commandline (as root):
/sbin/insmod agpgart
or alternatively configure your system to auto load the module.

Do you want to use the external AGP GART module (y/n)? [n]

AGP Locked User Pages

The graphics driver is able to read and write textures and bitmaps trough AGP
mapped and locked views of the main memory for the application’s mem space.
Performing those mapping task depends on several successfull interaction steps
with the Linux kernel. A failure in this process might lead to some messages
in the kernel log. If these kernel functions are failing silently or in case
of other heavy incompatibility (e.g. a new kernel memory manger) then there
is a high chance that the system will hang as soon as the graphics adpater
wants to read from assumed but nor really mapped memory location.

If you do see that the advanced fgl_glxgears application halts your session
whilst the simple glxgears does run nicely then please disable this feature.

If you do see lots of notifications about failed kernel calls for mem locking
then please disable this feature and re-check the kernel message log.

Do you want to enable “AGP Locked User Pages” (y/n)? [y]

TLS Method: *** this only applies to the FireGL workstation boards ***

The graphics driver supports two different methods of thread local storage.
The first method is fast but might immediately abort when used with
WineX, VM emulators or some other advanced programming tools.
The second method is up to 10% slower in a few rendering cases
but does cope nicely with any sort of exotic software.

For more details on this topic, please see the readme.

If not totally sure about your needs, then please select “0 – default”.

0 – default (FireGL workstation boards: fast)
1 – fast operation (only for standard gnu C/C++ OpenGL applications)
2 – compatible operation (for WineX, VM emulators and some profilers)

Which storage method do you want to use? [0]

==============================================================================
Finish
==============================================================================

I am going to write the xorg.conf file now. Make sure you don’t accidently
overwrite a previously configured one.

Shall I write it to ‘/etc/X11/xorg.conf’ (y/n)? y [/code]

[mtm76]

… na Slackware pa na Gentoo 😆

ŠTAAA? Ostavit Slackware zarad tamo neke distribucije čiji tvorac radi za M$? jeres… držte nevjernika… ma đe mi onaj glogov kolac… 😆

[mtm76]

1. uradio sam ln -s i x nece da se podigne. ukucam start x ekran pocrni i vrati se u konzolu.
3.mislio sam i ja da velicina nema veze, medjutim iskustvo mi govori da ipak ima.u raznim suse(8.0, 9.1,9.2) verzijama mi je uvek posle instalacije prijavljivao 14icu i osvezavao na 60hz.kada bi mu podesio da mi je monitor samsung 753s sve je radilo normalno.
4.ovako, bilo kakvo petljenje u xorg.conf dovodi to toga da kada ga ja snimim i pokrenem startx on se vrati u konzolu i napise da postoji greska.
kada posle instalacije slacka ne podesavam xorg i pokrenem startx on radi na 60hz i 1024×768, i prilikom dizaznja mi je prvo malo izdeformisana slika pa se vrati u normalu.
skidam driver pa videcu…

koju grešku izbaci… to što kažeš ne znači ništa… može biti milion razloga…
ako si ubjeđen da veličina monitora je bitna osobina, ti onda uzmi pa promjeni tu veličinu… samo ne znam gdje 😉
a to što ti je slika deformisana… pa jel ti monitor podržava toliku rezoluciju… ako je 17″, trebao bi raditi bez problema 1024×768@70 Hz… ako je 15″, onda 800×600@70Hz… a ti stavi 60Hz za svaki slučaj… 60Hz ti je maksimalna vertikalna frekvencija… max vert refresh rate, kada uradiš fglrxconfig…
ako ti 3D drajveri ne rade, uvjek možeš podesiti X sa xorgconfig i biće sve po starom

[mtm76]

1. skini najnovije drajvere sa ATI-jeve strane, jer ako ti taj stvarno pravi XF86Config-4, onda je u pitanju stariji drajver (nekih pola godine)… btw, dovoljno je da linkuješ
ln -s XF86_nesto xorg.conf
i radiće jer nema razlike.
2. jesi li siguran da si uradio sve što sam ti napisao
3. veličina monitora u inčima nema nikakve veze ni sa čim… bitna je maksimalna podržana rezolucija i frekvencija…
4. x se ruši… pojasni malo šta ti to znači… možda si stavi samo previsoku frekvenciju osvježavanja

[mtm76]

ako si skinuo pravu verziju drajvera (znaci za xorg6.8 x86), pretvoriš ih u tgz, pa instaliras (sto si uradio). U ovom trenutku nisu kompajlirani fglrx moduli, pa radiš to ručno
cd /lib/modules/fglrx/build_mod
sh make.sh
cd ..
sh make_install.sh
čime si kompajlirao odgovarajući modul. Još treba da podesiš Xorg, i to naredbom
fglrxconfig (a ne xorgconfig). Naravno ovo sve obavi u init 3 (otkucaj init 3). On ti je po defaultu, ako nisi stavi da se loguješ i grafičkog okruženja.

[mtm76]

A sto se mtm76 odgovora tice, koliko am Te razumeo ovo sto si napisao se odnosi na TV karticu (veruj mi, gledao sam…) – probacu pa cu da ti javim dal’ je uspelo – HVALA TI – i da sta je sa radio opcijom za ovu karticu?

Marko

hotplug skripta ti prepozna karticu, a ovo je konfiguracija za odgovarajuće module koji se trebaju učitati… dobićeš /dev/video0 i /dev/radio0 uređaje za tv, odnosno radio… /dev/dsp koristiš za snimanje radija pomoću KRadia, naprimjer…

[Аутор]

Чланци