Ћирилица

[AuReUs_ReCtoR]

hmz, aj probaj ovaj nacin …

Kad se podigne sluse, udji u tjistu konsolu (ctrl+alt+f2)
uloguj se kao root i predji u init3 (init 3) instaliraj graficku (http://www.nvidia.com) znaci skini driver sa njihovog sajta, chmoduj na 755 startuj (sh ime) instaliraj … nakon toga pokreni sax2 podesi 3d i ostalo sto zelis …
Kad to odradis idi na init5 (init 5).

Trebalo bi ovo da ti uspe .. Ako ne … Vitji 😉

[AuReUs_ReCtoR]

kako procitah negde na novom kerenlu 2.6.11 je 99% podrzan, zato sam stavio novi kernel i za sada nemam problema sa pisanjem, mada ga nisam forsirao jer imam malo bitnije podatke po njemu 😉

toliko …

[AuReUs_ReCtoR]

hmz, interesantno je to sto si spomenuo, tjak sam i ja tjuo to negde koliko se setjam ali sam isqlirao, reko nbtna stvar 😛
nego aj ti meni napisi liniju kako bi trebala da bude, pa da probam.
Ovo su mi sadasnje:
[code]/dev/cdrecorder /media/cdrecorder subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0
/dev/cdrom /media/cdrom subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0
[/code]

😕

[AuReUs_ReCtoR]

heh, kad sam rekompajlirao kernel, pogasio sam mu sve vezano za scsi (misletji posto nemam scsi kontroler da mi netje trebati nisto od toga) 🙂
da nije zbog toga?

[AuReUs_ReCtoR]

heh, ja uopste nemam cups u systemu, potpuno sam ga izbrisao ,z ato i ne vidim localhost na 631portu … nemam cups server …
Kako da ga instaliram ? 🙂

[AuReUs_ReCtoR]

Evo sta kaze kad izbrisem iz fstab-a “ro” za rezac:

rector:/ # mount /dev/hdc /media/cdrecorder
/dev/hdc: Input/output error
mount: block device /dev/hdc is write-protected, mounting read-only
/dev/hdc: Input/output error
mount: /dev/hdc: can’t read superblock

Evo i za hdparm:

rector:/home/rector # hdparm /dev/hdc

/dev/hdc:
HDIO_GET_MULTCOUNT failed: Invalid argument
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument

😕

[AuReUs_ReCtoR]

e sorry na postu … poludeo sam bio na kratko, imao sam sjeban dan pa reko odma da kukam 🙂
u glavnom sam mi bio upalio u opcijama neki slow button … na accebility …

[AuReUs_ReCtoR]

koliko ja znam, da … 😕

hmz pa pazi… mora da je nesto do kernela, radio je pre rekompajliranja 😀

[AuReUs_ReCtoR]

message log:

May 14 00:13:23 rector kernel: hdc: command error: status=0x51 { DriveReady SeekComplete Error }
May 14 00:13:23 rector kernel: hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
May 14 00:13:23 rector kernel: ide: failed opcode was: unknown
May 14 00:13:23 rector kernel: end_request: I/O error, dev hdc, sector 0
May 14 00:13:23 rector kernel: Buffer I/O error on device hdc, logical block 0
May 14 00:13:23 rector kernel: hdc: command error: status=0x51 { DriveReady SeekComplete Error }
May 14 00:13:23 rector kernel: hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
May 14 00:13:23 rector kernel: ide: failed opcode was: unknown
May 14 00:13:23 rector kernel: end_request: I/O error, dev hdc, sector 0
May 14 00:13:23 rector kernel: Buffer I/O error on device hdc, logical block 0
May 14 00:13:23 rector kernel: hdc: command error: status=0x51 { DriveReady SeekComplete Error }
May 14 00:13:23 rector kernel: hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
May 14 00:13:23 rector kernel: ide: failed opcode was: unknown
May 14 00:13:23 rector kernel: end_request: I/O error, dev hdc, sector 0
May 14 00:13:23 rector kernel: Buffer I/O error on device hdc, logical block 0
May 14 00:13:23 rector kernel: hdc: command error: status=0x51 { DriveReady SeekComplete Error }
May 14 00:13:23 rector kernel: hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
May 14 00:13:23 rector kernel: ide: failed opcode was: unknown
May 14 00:13:23 rector kernel: end_request: I/O error, dev hdc, sector 0
May 14 00:13:23 rector kernel: Buffer I/O error on device hdc, logical block 0
May 14 00:13:23 rector kernel: hdc: command error: status=0x51 { DriveReady SeekComplete Error }
May 14 00:13:23 rector kernel: hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
May 14 00:13:23 rector kernel: ide: failed opcode was: unknown
May 14 00:13:23 rector kernel: end_request: I/O error, dev hdc, sector 0
May 14 00:13:23 rector kernel: FAT: unable to read boot sector
May 14 00:13:39 rector su: FAILED SU (to root) rector on /dev/pts/6
May 14 00:13:46 rector su: (to root) rector on /dev/pts/6

fstab:

/dev/cdrecorder /media/cdrecorder subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=

😕

[AuReUs_ReCtoR]

HP LaserJet 1000

Kako mislis jel imam vezu? 😛

[Аутор]

Чланци