Slax Vodic za prezivljavanje (Live linux) USB flash-CD

[dukenukem_4d]

http://support.dell.com/support/edocs/systems/opgx260/en/
evo ovde je dokumentacija za ploču

ima i service manual , skini oba pdf pa posle da vidimo dalje koj mu je mantrak
ima neki kvar ,ili neka malfunkcija 😮

koji je kod tebe
Small Mini-Tower Computer
http://support.dell.com/support/edocs/systems/opgx260/en/ug/smt.jpg
Small Desktop Computer
http://support.dell.com/support/edocs/systems/opgx260/en/ug/sd.jpg
Small Form-Factor Computer
http://support.dell.com/support/edocs/systems/opgx260/en/ug/sff.jpg

[dukenukem_4d]

imaš ovde neki program dell diagnostics ?

ili je na cd-u ili može sa utiltz particije da se pusti
http://support.dell.com/support/edocs/systems/opgx260/en/ug/advtshoo.htm#1163831
ima ga kao izbor u Boot to Utility Partition (ako nije reformatiran disk bio? )

[rellik]

http://support.dell.com/support/edocs/systems/opgx260/en/
evo ovde je dokumentacija za ploču

ima i service manual , skini oba pdf pa posle da vidimo dalje koj mu je mantrak
ima neki kvar ,ili neka malfunkcija 😮

koji je kod tebe
Small Mini-Tower Computer
[url=http://support.dell.com/support/edocs/systems/opgx260/en/ug/smt.jpg]http://support.dell.com/support/edocs/systems/opgx260/en/ug/smt.jpg[/url]
Small Desktop Computer
[url=http://support.dell.com/support/edocs/systems/opgx260/en/ug/sd.jpg]http://support.dell.com/support/edocs/systems/opgx260/en/ug/sd.jpg[/url]
Small Form-Factor Computer
[url=http://support.dell.com/support/edocs/systems/opgx260/en/ug/sff.jpg]http://support.dell.com/support/edocs/systems/opgx260/en/ug/sff.jpg[/url]

To su gluposti, ako si zavirio znaci samo kako se sta sklapa …
Ovo sam ja nasao kako se pali USB 2.0  na intel plocama …
http://www.intel.com/support/motherboards/desktop/sb/cs-009024.htm
Medjutim tog u mom biosu nema … evo nasao sam ovde identicno kao moj bios …
http://www.austincc.edu/cloud/manuals/Dell/GX260/advfeat.htm#1101572
I jos sam nabasao na ovo ne znam dal sta znaci i pomaze ili odmaze …
http://www.intel.com/support/graphics/sb/CS-010516.htm

itd  :angel:

Dodatak, napisao sam ti jos nocas da sam pogledao sa tim cudom 🙂

Edit: tesko te povatati sve izmene i ostalo, kod mene je small mini-tower

[dukenukem_4d]

USB Emulation — Settings are On and Off (default for Windows NT®)
probaj sa ovom opcijom

pa onda isključi usb boot
ALI po ovom uputstvu (koje je slično ali nije isto)
http://support.dell.com/support/edocs/systems/opgx260/en/ug/advfeat.htm#1101572

[rellik]

Njah nista ne pomaze :'( Izgleda da sam ja opet nasao distribuciju od koje cu odustati  :redface:

EDIT: Dal ovo sta pomaze  :redface:

http://www.benchmark.rs/forum/archive/index.php/t-130208.html

[dukenukem_4d]

da rezimiramo:
1. postoji neki hardverski problem u vezi usb 2.0 kontrolera na ploci 🙁
(неки део се искварио ? ко би га знао)
2. uprkos tome moguћа је конекција преко усб адсл модема
на виндоусу јер он иде као усб 1.1

3

A kao bonus na sve to mi je odjednom prsao net u windowsu i sada ona treca lampica za prenos podataka stalno treperi bilo da sam konektovan ili ne  😮
[color=blue]A u linuxu je kao napravio konekciju i konektovao se al prenos podataka 0 … [/color] :redface:

ovo što je plavo podvučeno , moguće da nije lepo napravljeno ono pppoe-setup 😀

jel može da kažeš šta si gde unosio?

(znači iste one komande kao pre ,sa nekim pauzama između
dok se ne upale diodice pa tek posle
bitno je da ne javi grešku posle otkucane  br2684ctl komande)

root@slax:~# pppoe-setup
Welcome to the Roaring Penguin PPPoE client setup.  First, I will run
some checks on your system to make sure the PPPoE client is installed
properly…

Looks good!  Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default [email protected]): [color=blue][b]pera@sezampro[/b][/color]

INTERFACE

>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where ‘n’ is a number.
(default eth0): [color=blue][b]nas0[/b][/color]

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter ‘no’ (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.
>>> Enter the demand value (default no): [color=blue][b]no[/b][/color]

DNS

Please enter the IP address of your ISP’s primary DNS server.
If your ISP claims that ‘the server will provide DNS addresses’,
enter ‘server’ (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here: [color=blue][b]server[/b][/color]

PASSWORD

>>> Please enter your PPPoE password:
>>> Please re-enter your PPPoE password:

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose ‘NONE’ and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 – NONE: This script will not set any firewall rules.  You are responsible
          for ensuring the security of your machine.  You are STRONGLY
          recommended to use some kind of firewall rules.
1 – STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 – MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
>>> Choose a type of firewall (0-2): [color=blue][b]1[/b][/color]

** Summary of what you entered **

Ethernet Interface: nas0
User name:          pera@sezampro
Activate-on-demand: No
DNS addresses:      Supplied by ISP’s server
Firewalling:        STANDALONE

>>> Accept these settings and adjust configuration files (y/n)? [color=blue][b]y [/b][/color]      

umesto pera@sezampro   za verat valjda [email protected]
za eunet ne znam tačno ? jebiga kao na vindousu da izgleda korisničko ime

lozinka se ne vidi dok se kuca

[dukenukem_4d]

lepo kucaj ove komande na početku , ne kucaš precizno 😡 :'(

[code]
modprobe br2684
br2684ctl -c 0 -b -a 8.35
ifconfig nas0 up
[/code]

EDIT: a probaj sa nekom drugom fleškom dali
hoće kao usb 2.0 da se prikači na windousu
(znači d ane javi ono prozorče sa jedne od prethodnih slika veš da odmah ide punom brzinom ) 😀

[rellik]

Nemam drugu flesku, al treba da dobijem ovakvu od 4 gb zato sam zapeo za ovo  ^-^

Elem evo ti moje pogresno kucanje :

[code]root@slax:~# modprobe br2684
root@slax:~# br2684 -c 0 -b -a 8.35
-bash: br2684: command not found
root@slax:~# ifconfig nas0 up
nas0: ERROR while getting interface flags: No such device
root@slax:~# pppoe-setup
Welcome to the Roaring Penguin PPPoE client setup.  First, I will run
some checks on your system to make sure the PPPoE client is installed
properly…

Looks good!  Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default [email protected]): [email protected]

INTERFACE

>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where ‘n’ is a number.
(default eth0): nas0

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter ‘no’ (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.
>>> Enter the demand value (default no): no

DNS

Please enter the IP address of your ISP’s primary DNS server.
If your ISP claims that ‘the server will provide DNS addresses’,
enter ‘server’ (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here: server

PASSWORD

>>> Please enter your PPPoE password:
>>> Please re-enter your PPPoE password:

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose ‘NONE’ and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 – NONE: This script will not set any firewall rules.  You are responsible
          for ensuring the security of your machine.  You are STRONGLY
          recommended to use some kind of firewall rules.
1 – STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 – MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
>>> Choose a type of firewall (0-2): 1

** Summary of what you entered **

Ethernet Interface: nas0
User name:          [email protected]
Activate-on-demand: No
DNS addresses:      Supplied by ISP’s server
Firewalling:        STANDALONE

>>> Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/ppp/pppoe.conf
Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
  (But first backing it up to /etc/ppp/pap-secrets-bak)
  (But first backing it up to /etc/ppp/chap-secrets-bak)

Congratulations, it should be all set up!

Type ‘pppoe-start’ to bring up your PPPoE link and ‘pppoe-stop’ to bring
it down.  Type ‘pppoe-status’ to see the link status.
root@slax:~# pppoe-start
…………….TIMED OUT
/usr/sbin/pppoe-start: line 191:  6636 Terminated              $CONNECT “$@” >/dev/null 2>&1
root@slax:~#
[/code]

[dukenukem_4d]

kod tebe stoji

root@slax:~# br2684 -c 0 -b -a 8.35

a trebalo bi

root@slax:~# [color=red]br2684ctl[/color] -c 0 -b -a 8.35

:'(

br2684ctl -c 0 -b -a 8.35
br2684ctl -c 0 -b -a 8.35

edit
ostalo, doduše, izgleda u redu 😀 ???

[rellik]

kod tebe stoji
[quote]
root@slax:~# br2684 -c 0 -b -a 8.35

a trebalo bi

root@slax:~# [color=red]br2684ctl[/color] -c 0 -b -a 8.35

:'(

br2684ctl -c 0 -b -a 8.35
br2684ctl -c 0 -b -a 8.35

[/quote]

pa to si sad prvi put napisao do sad nijednom mi to nisi stavio  😮 ajd odo jopet  :biggrin:

EDDDIIITTT :laugh: Evo mene iz slax-a  😀 . Samo moram ici na ono always fresh posto se zapucava kde na ntfs particiji … Tako da je sad glavni i osnovni problem naterati ga sa flesa  :angel:

EDIT:

[Аутор]

Чланци