Latinica

[tomil]

Ja pokusavam da namestim onaj Telekomov ZTE MF622 USB 3G Modem, al’ uporno mi izbacuje:

Nemam iskustva sa tim modemom, ali koliko vidim na netu (google je nas najbolji prijatelj) to je neki slican ili isti kao Huawei E219.

Evo ti neki linkovi:
“raspad sistema; mts 3g net, ZTE MF622 i Ubuntu 8.10; & i’m back …”
http://abakus.wordpress.com/2008/12/05/raspad-sistema-mts-3g-net-zte-mf622-i-ubuntu-810/

http://en.wikipedia.org/wiki/Vodafone_Mobile_Connect_Card_driver_for_Linux

https://forge.betavine.net/projects/vodafonemobilec/

[tomil]

  U međuvremenu mi je dosla do ruku i MTS kartica, pa sam probao i sa njom.
Prepravio sam wvdial.conf da obuhvatim i MTS:

# wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = 1
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0

[Dialer telenor3G]
Init1 = ATZ
Init2 = AT+COPS=0,0,”YU MOBTEL”,2
Init3 = ATE0V1&D2&C1S0=0+IFC=2,2
Init4 = AT+CSQ
Init5 = AT+CGDCONT=1,”IP”,”internet”;
Modem Type = USB Modem
ISDN = 0
Modem = /dev/ttyACM0
Dial Command = ATDT
Phone = *99***1#
Username = telenor
Password = gprs
Baud = 460800

[Dialer telenorGPRS]
Init1 = ATZ
Init2 = AT+COPS=0,0,”YU MOBTEL”,0
Init3 = ATE0V1&D2&C1S0=0+IFC=2,2
Init4 = AT+CSQ
Init5 = AT+CGDCONT=1,”IP”,”internet”;
Modem Type = USB Modem
ISDN = 0
Modem = /dev/ttyACM0
Dial Command = ATDT
Phone = *99***1#
Username = telenor
Password = gprs
Baud = 460800

[Dialer mts3G]
Init1 = ATZ
Init2 = AT+COPS=0,0,”YUG 03″,2
Init3 = ATE0V1&D2&C1S0=0+IFC=2,2
Init4 = AT+CSQ
Init5 = AT+CGDCONT=1,”IP”,”3gdata”;
Modem Type = USB Modem
ISDN = 0
Modem = /dev/ttyACM0
Dial Command = ATDT
Phone = *99***1#
Username = mts
Password = 064
Baud = 460800

[Dialer mtsGPRS]
Init1 = ATZ
Init2 = AT+COPS=0,0,”YUG 03″,0
Init3 = ATE0V1&D2&C1S0=0+IFC=2,2
Init4 = AT+CSQ
Init5 = AT+CGDCONT=1,”IP”,”3gdata”;
Modem Type = USB Modem
ISDN = 0
Modem = /dev/ttyACM0
Dial Command = ATDT
Phone = *99***1#
Username = mts
Password = 064
Baud = 460800

za Telenor je sada:
wvdial –config /etc/ppp/peers/wvdial.conf telenor3G
wvdial –config /etc/ppp/peers/wvdial.conf telenorGPRS
a za MTS:
wvdial –config /etc/ppp/peers/wvdial.conf mts3G
wvdial –config /etc/ppp/peers/wvdial.conf mtsGPRS

Uređaj je onaj isti koji sam dobio od Telenora “XSPlugP3”

[tomil]

a apache sta sa njim da radim .Mdk 10.1

Da se više ne startuje po butovanju:

#chkconfig –level 2345 httpd off

Da ga zaustaviš:

#/etc/init.d/httpd stop

[tomil]

A i neki program za BAR KODOVE, mozda?????

Možda ovo?

KBarcode is a barcode and label printing application for Linux and KDE 3. It can be used to print every thing from simple business cards up to complex labels with several barcodes (e.g. article descriptions).

http://www.kbarcode.net/

[tomil]

Da li je moguce da Mandrake ne podrzava UPS-eve?

Podrka za UPS ne zavisi od distribucije linuxa ve?od proizvoa? ureaja.
APC ima dobru podrku za Linux, ako se odlu? za njih dobi? sav potreban softver.

BestPower nema (nije imao) neku podrku za linux, ali ima jako dobre proizvode.
Moe da pogleda i nezavisne proizvoa? softvera za UPS na primer Network UPS Tools (NUT) – http://www.exploits.org/nut/
koji podrava razli?te modele UPS, a ima ga i na instalacionim CD-ovima za Mandrake.

[Autor]

Članci