Latinica

[nomercy]

Gle cuda radi….

Momci hvala Vam najlepse,da budem iskren nisam verovao da cu je pokreni

hvala,hvala….bilo joj je samo malo potrebno

[nomercy]

dmesg

tuner 1-0061: chip found @ 0xc2 (cx88[0])
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
gspca: probing 0c45:612a
sonixj: Sonix chip id: 12
gspca: probe ok
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles))
tuner-simple 1-0061: destroying instance
xc2028 1-0061: creating new instance
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
input: cx88 IR (Leadtek TV2000 XP Glob as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/input/input7
cx88[0]/0: found at 0000:05:00.0, rev: 5, irq: 20, latency: 32, mmio: 0xea000000
IRQ 20/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx8800 0000:05:00.0: firmware: requesting xc3028-v27.fw
xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000.
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
cx88[0]: Calling XC2028/3028 callback
cx88_audio 0000:05:00.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
IRQ 20/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
xc2028 1-0061: Error on line 1137: -6
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
cx88[0]: Calling XC2028/3028 callback
xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000.
cx88[0]: Calling XC2028/3028 callback

[nomercy]

Opet sam izgubio opciju skeniranja kanala na TVtime

KDETV vidi samo web kameru

Fajl sam stavio gde treba

[nomercy]

Imam ja taj fajl ali ja nevidim gde njega da iskopiram,u tom uputsvu pise da se instalira zato sam rekao instalirati!
A ne mogu ga ni otvoriti

File type unknown

Kazes u dir. da se iskopira?

Gde,kako…

U
/etc/modprobe.d/tvcard.conf

stoji

options cx88xx card=61 tuner=71 radio=1

Sada imam opciju trazenja kanala koju sam blagovremeno izgubio.

[nomercy]

dmesg

xc2028 1-0061: Error: firmware xc3028-v27.fw not found.
xc2028 1-0061: Error on line 1135: -6

Kako da instaliram firmware na 64 bit-nom Arch-u?

lspci -nnv

Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: LeadTek Research Inc. Device [107d:6618]
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at eb000000 (32-bit, non-prefetchable)
Capabilities: [4c] Power Management version 2
Kernel driver in use: cx88_audio
Kernel modules: cx88-alsa

lsmod

usbcore               183764  6 usblp,gspca_sonixj,uhci_hcd,ehci_hcd,gspca_main
videodev               42752  5 tuner,cx8800,cx88xx,v4l2_common,gspca_main
v4l1_compat            18276  1 videodev
v4l2_compat_ioctl32    11040  1 videodev
intel_agp              34096  0
i2c_core               25664  11 tuner_simple,tuner,tuner_xc2028,cx8800,cx88xx,i2c_algo_bit,v4l2_common,tveeprom,nvidia,i2c_i801,videodev

@GoranSTX

U pravu si ti,svestan da nisam karticu podesio kako treba a trazim ….ok.zanemarimo.

Znam da su totalno razlicite po cipu al obe su win fast….slazem se sa tobom da bi radilo da su iste

[nomercy]

Stavio sam na TV mode ali pod device mi prikazuje samo web kameru.

Imas neka podesavanja za kdetv?

[nomercy]

To je tacno da je podrzana,to znam.

Ali nisam naisao na neko resenje…koje bi meni pomoglo.

Recimo ista karta ali Expert radi bez nekog posebnog cimanja.Zao mi je da dajem bolju kartu za losiju.

Zamena ne dolazi u obzir,a jako bi voleo da je podesim posto samo Linux koristim

Sada nemam opciju trazenja tj.skeniranja kanala.Znam da sam to imao.

Mozda da pokusam malo sa nekim drugim plejerom za TV

Neka preporuka,posto ne znam ni jedan pored TVtime-a

[nomercy]

Kako da instaliram firmware na Arch-u?

[nomercy]

Malo sam dosadan…

Kome ovde da verujem?

EtherApe mi pokazuje silne konekcije dok sistem monitor nista.Conky takodje broji svoje.

http://img178.imageshack.us/img178/3383/screenshotih.png

Ovo je odma nakon restarta

[nomercy]

Pa glupo je kada nemozes nista instalirati,a jos je gluplje pobeci od problema time sto bi instalirao ponovo sistem.Tako se sticu neka iskustva…mada…kad se mora,mora se

[Autor]

Članci