Napravljene poruke na forumu
-
Članci
-
Spooky
Imas pivo po izboru problem resen.(resenje 1)Bio sam blizu resenja instalirao sam lilo u sda i dobio nesto slicno resenju 2 koje nije radilo.
Eh da sam sacuvao stari lilo …Upozorenje nema veze dodao sam lba32.
1. U biosu je postavljen hda da se prvi podize, probane i druge kombinacije koje naravno nerade.
2. Windows particje sve koliko ih ima nesmetano rade, tj vidim ih !Samo jedan Win i samo na jednoj particiji sda1 ostatak hdd – a podeljen na druge (NTFS) particije.
Neprijavi nista ispise samo Loading Windows i tako stoji u nedogled.cat /et/fstab
[code]/dev/hda3 swap swap defaults 0 0
/dev/hda1 / ext4 defaults 1 1
/dev/hda2 /Test ext4 defaults 1 2
/dev/sda1 /Windows/C ntfs-3g umask=022 1 0
/dev/sda5 /Windows/D ntfs-3g umask=022 1 0
/dev/sda6 /Windows/E ntfs-3g umask=022 1 0
/dev/sda7 /Windows/F ntfs-3g umask=022 1 0
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
[/code]Prilikom instaliranja je podesen kao master hdd na kome je Linux sada kada hocu u Win moram da podesim sda kao master jer drugacije nemogu da mu pristupim. Naravno onda nemam mogucnost izbora jer je Lilo na hda.
I da napomenem jos da je Linux hdd ATA dok je Win SATA sto opet ne bi tebalo da ima neke veze.
Mozba bi problem resilo ako bih Lilo upisao na SATA …Nakon instalacije nista nisam cackao to je sto je 😀
#fdisk -l
[code]Disk /dev/hda: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xabade207Device Boot Start End Blocks Id System
/dev/hda1 1 2550 20482843+ 83 Linux
/dev/hda2 2551 4935 19157512+ 83 Linux
/dev/hda3 4936 4998 506047+ 82 Linux swapDisk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x26ce077fDevice Boot Start End Blocks Id System
/dev/sda1 * 1 5100 40965718+ 7 HPFS/NTFS
/dev/sda2 5101 38913 271602922+ f W95 Ext’d (LBA)
/dev/sda5 5101 20399 122889186 7 HPFS/NTFS
/dev/sda6 20400 35698 122889186 7 HPFS/NTFS
/dev/sda7 35699 38913 25824456 7 HPFS/NT[/code]
@Spooky13
Prepravio neradi, kad sam ponovo pokrenuo #lilo prijavio mi je da je particija uspesno dodata[code]Warning: LBA32 addressing assumed
Added Windows *
Added Linux
One warning was issued[/code]Koliko vidim sve se vrti oko LBA32
Jeste tako je bilo svih ovih godina bez problema sve do sad.
Da ne bi otvarao novu temu postavicu pitanje ovde.
U pitanju je dual boot winxp i slack13
Instalacija je protekla bez problema medjutim prolikom izbora sistema Linux radi normalno ali windows se ne podize ?[code]# LILO configuration file
# generated by ‘liloconfig’
#
# Start LILO global section
# Append any additional kernel parameters:
append=” vt.default_utf8=0″
boot = /dev/hda# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
bitmap = /boot/slack.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
bmp-colors = 255,0,255,0,255,0
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), “spill” (this is how many
# entries must be in the first column before the next begins to
# be used. We don’t specify it here, as there’s just one column.
bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
bmp-timer = 65,27,0,255# Standard menu.
# Or, you can comment out the bitmap menu above and
# use a boot message with the standard menu:
#message = /boot/boot_message.txt# Wait until the timeout to boot (if commented out, boot the
# first entry immediately):
prompt
# Timeout before the first entry boots.
# This is given in tenths of a second, so 600 for every minute:
timeout = 1200
# Override dangerous defaults that rewrite the partition table:
change-rules
reset
# VESA framebuffer console @ 1024x768x256
vga = 773
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# End LILO global section
# Windows bootable partition config begins
other = /dev/sda
label = Windows
table = /dev/sda1
# Windows bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/hda1
label = Linux
read-only
# Linux bootable partition config ends[/code]Zaboravih da kazem problem resen.
Mrzelo me da trazim sta nevalaj pa sam instalirao sve ponovi i sve radi … dok nesto neza*ebemPogledaj izlaz komande
Kod:cat /etc/groups | grep audio
Ima li tu tvog korisnika?
Ne samo sto nema mog korisnika nego tu nema nicega, e stvarno sam …
[code]No such file or directory[/code]
Umor cini svoje, nastavljam sutra dok jos nesto nisam zeznuo.
ls -l /dev/dsp
[code]crw-rw—- 1 root audio 14, 3 2008-12-30 22:05 /dev/dsp
[/code]Kako god i sta god da podesim uvek ponovnim pokretanjem racunara dobijem ovo gore.
ALSA je postavljena za output, ijos hiljadu drugih kombinacija ali nista nema tona.
Ovo sa dodavanjem korisnika nije uspelo jer mi uvek pokaze da korisnik postoji u grupi ili ja nesto tu radim pogresno. 😮
Ajd sad kako da se dodam u grupu 😀Sa i bez flash animacija firefox koci ko blesav zato sam presao na operu i resio se problema.
Bas kao sto kaze zchira. To mi se desava od kada sam presao na slackware 12. Pokusaj ponovnog instaliranja nije dalo nikakve rezultate tako dado daljnjeg ostajem na operi.S obzirom da si korisnik Mozilla Firefox-a mozda ce te ovo zanimati.
