cyberella

Napravljene poruke na forumu

Gledanje 1 članka - 1 do 2 (od 2 ukupno)
  • Autor
    Članci
  • kao odgovor na: Generic soft56K connexant #23662
    cyberella
    Učesnik

    Instalirala sam drajvere za HCF chipset sa Slackware portala, sledila sva uputstva, i sada kad uradim Query Modem, Linux ga prepoznaje ali pri pokušaju konektovanja samo stoji “Initialising Modem” i ništa se ne dešava. Šta može biti u pitanju?

    kao odgovor na: Generic soft56K connexant #23660
    cyberella
    Učesnik

    Poydrav. Imam slican problem, isto Conexant modem, na Mandrake 9 distoru. Ne mogu da otvorim drugi link koji je boxer postavio, ovaj za patch – http://www.linuxo.org/modules.php?name=Downloads&d_op=getit&lid=78.

    Inače, Linux čita moj modem ovako:

    Only plain text email is forwarded by the  [email protected] List Server.
    Do use the following as the email Subject Line:
              SomeName, YourCountry Mandrake Linux release 9.0 (dolphin) for i586
    Kernel 2.4.19-16mdk on an i686 /  kernel 2.4.19-16mdk 
    This will alert cogent experts, and  distinguish cases in the Archives.
    YourCountry will enable Country Code guidance.
    Occassionally responses are blocked by an Internet Provider mail filters.
    So in a day, also check the Archived responses at http://www.linmodems.org .
    Local Linux experts can be found through: http://www.linux.org/groups/index.html
    ————————–  System information —————————-
    Mandrake Linux release 9.0 (dolphin) for i586
    Kernel 2.4.19-16mdk on an i686 / 
    Linux version 2.4.19-16mdk ([email protected]) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
    scanModem update of:  2006_November_07
    The modem symbolic link is /dev/modem -> ttyS4

    USB modem not detected by lsusb

    Modem or host audio card candidates have firmware information:

    PCI slot      PCI ID            SubsystemID      Name
    ———-      ———      ———      ————–
    01:0a.0      14f1:1085      14f1:1085      Communication controller: Conexant: Unknown device 1085 

    Modem interrupt assignment and sharing: 
      9:      2578          XT-PIC  i810@PCI:0:1:0

    — Bootup diagnositcs for card in PCI slot 01:0a.0 —-

    === Finished modem firmware and bootup diagnostics section. ===
    === Next deducing cogent software ===

    For candidate modem in PCI bus:  01:0a.0
      Class 0780: 14f1:1085 Communication controller: Conexant: Unknown device 1085
        Primary PCI_id  14f1:1085
    Support type needed or chipset:      HCF.HSF

    Formal support for Conexant chipset modems are available ONLY through 
    http://www.linuxant.com/drivers.  Read Conexant.txt for details.
    and Modem/YourSystem.txt for follow through guidance.  Driver speed is limited to
    14,400 until a key is purchased.  There is NO freeware alternative.
    There are two support package types: hsfmodem  and hcflinmodem.
    http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
    problem and solution in stalling a key, after testing of the free low
    speed download.

    14f1:1085 could be either a HSF or HCF Conexant modem, because of ambiguous
    use of the PCI ID by modem assemblers. First try the hcflinodem package.
    If the installation aborts, then use the hsfmodem package. Read Conexant.txt
    for details and Modem/YourSystem.txt for follow through guidance.

    The hsfmodem package serves a great variety of Conexant chipset modems. 
    Start at  http://www.linuxant.com/drivers/hsf for
    eventually download of a hsfmodem-SomeVersion.zip  package with
    SomeVersion containing your kernel_version 2.4.19-16mdk  in the filename if possible. 
    These packages have compiled drivers. Otherwise download the generic 
    hsfmodem-Version.tar.gz  package. Its usage will require compiling.

    Read Conexant.txt

    Writing Conexant.txt

    Completed candidate modem analyses.

    A UDEV device file system is not active.

    The kernel was compiled with gcc version 3.2 and a compiler is not installed

    Kernel-header resources needed for compiling are not manifestly ready!

    If compiling is necessary packages must be installed, providing:
        gcc-3.2  kernel-source-2.4.19-16mdk

    Checking pppd properties:
        -rwsr-xr-t    1 root    root      239192 Aug  9  2002 /usr/sbin/pppd

    In case of an “error 17” “serial loopback” problem, see:
        http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

    To enable dialout without Root permission do:
        $ su – root  (not for Ubuntu)
            chmod a+x /usr/sbin/pppd
    or under Ubuntu related Linuxes
          chmod a+x /usr/sbin/pppd

    Checking settings of:      /etc/ppp/options
    lock
    noauth
    noipdefault
    usepeerdns

    Don’t worry about the following, it is for the experts
    should trouble shooting be necessary.

    E sad, ja sam početnica, pa ne razumem ni da li uopšte postoje besplatni drajveri za ovaj modem, jer sam traganjem poslednjih par dana uspela da nadjem samo Linuxant sajt i uputstva za ove drajvere koji se kupuju za 19.95 USD, što mi je nebuloza davati. Samo me zanima da li može da proradi i bez ove kupovine, ondosno da li se mogu naći besplatni drajveri za Conexant modem. Hvala.

Gledanje 1 članka - 1 do 2 (od 2 ukupno)