Резултати претраге за 'php'

[RiSK]

U Nišu je prošle jeseni organizovan festival e-tvrđava
Između ostalog, bilo je dosta tema o slobodnom softveru

Mogli bi da popričamo sa organizatorima ovog događaja (nadam se da će postati tradicionalan) pa da ove godine bude još neko interesantno izlaganje. 😉

[BRANKKO]

Mislim da ces morati da za to drugo dugme napravis poseban koji get-uje na ”advancedsearch.php’

[madcama]

A da umesto
[code]Napredno[/code]
stavis
[code]Napredno pretrazivanje[/code]

Jeste da nije ono sto ti pokusavas da uradis ali resice problem.

[burga]

Imam ovakav kod na jednoj strani:
[code]

Traži
 
Napredno

[/code]

Dakle, želim da postoji dugme za brzu pretragu i dugme (ne običan link) koje bi vodilo na formular za naprednu pretragu. Ovo lepo radi u Operi i Firefoxu, ali u Konqueroru se klikom na dugme „napredno“ ne dešava ništa.

Da li je problem u konqueroru ili sam ja napravio neku grešku koju Opera i Firefox zaobilaze?

[BRANKKO]

Dakle, pretpostavimo da imam program koji se zove moj-program i koji se nalazi u /usr/bin/moj-program.

I da zelim da ga pokrecem kao service (daemon)

Potrebno je da napravim daemon script za pokratenja/zaustavlje/restartovanje servisa
http://www.linux.com/archive/articles/46892

I da skriptu smestim u /etc/init.d pod imenom koje zelim (npr moj-servis)

Dalji rad sa servisom bi bio ovakav:

Fedora/RedHat
[code]chkconfig moj-servis on // pokrece se prilikom boota
chkconfig moj-servis off // ne pokrece se prilikom boota
service moj-servis stop // zaustavlja pokrenuti servis
service moj-servis start // startuje servis
service moj-servis restart // zaustavlja i startuje (restartuje) servis[/code]

Ubuntu/Debian
[code]update-rc.d moj-servis defaults 98 // pokrece se prilikom boota
update-rc.d moj-servis remove // ne pokrece se prilikom boota[/code]

Gentoo
[code]rc-update add moj-servis default // pokrece se prilikom boota
rc-update del moj-servis // ne pokrece se prilikom boota[/code]

SUSE
[code]insserv moj-servis // pokrece se prilikom boota
insserv -r moj-servis // ne pokrece se prilikom boota[/code]

ili generalno
[code]/etc/init.d/moj-servis start //startuje servis
/etc/init.d/moj-servis stop // zaustavlja pokrenuti servis
/etc/init.d/moj-servis status // za proveru (ispis) statusa[/code]

Am I right?

[BRANKKO]

Stize nam KDE4.3 RC1
http://kde.org/announcements/announce-4.3-rc1.php

Jos malo pa stize i final 🙂

[BRANKKO]

Mozda je ipak bolje kloniti se Mono-a i C#-pa… As It Stands, Ubuntu Has No Issues With Mono

[BRANKKO]

ATI’s X.Org DDX Driver Gets KMS Ready

Mozda se poboljsa stanje 🙂

[BRANKKO]

Heh, pa trebalo je samo da prethnodno iskljucim onog intela:
[code][root@b35 brankko]# rmmod kvm-intel
[root@b35 brankko]# rmmod kvm[/code]
Evo ga sad radi 🙂

I stvarno super sto sad imam 3D u virtuelnoj masini, kad nemam u native 😀

[dukenukem_4d]

evo i za fedoru 8 , to je trebalo i ranije ,nisam se trebao mlatim sa gui/jem 😀

ovako ‘ladno rade skripte ^-^

fedora 8 driver for au5 actiontec  ,(kao i za srpski spin fedore live cd )

prvo iskljucite avahi OBAVEZNO

ovako se postavlja ppp over ethernet posle uputstava iz drajvera

[code]
/sbin/pppoe-setup
[/code]

# /sbin/pppoe-setup
Welcome to the PPPoE client setup.  First, I will run some checks on
your system to make sure the PPPoE client is installed properly…

The following DSL config was found on your system:

  Device:      Name:
  ppp0        DSLppp0

Please enter the device if you want to configure the present DSL config
(default ppp0) or enter ‘n’ if you want to create a new one:

LOGIN NAME

Enter your Login Name (default peraidjole@sezampro): [color=blue]peraidjole@sezampro[/color]

INTERFACE

Enter the Ethernet interface connected to the PPPoE modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where ‘X’ is a number.
(default dsl0): [color=blue]dsl0[/color]

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter ‘no’ (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.
Enter the demand value (default no):

DNS

Please enter the IP address of your ISP’s primary DNS server.
If your ISP claims that ‘the server will provide dynamic DNS addresses’,
enter ‘server’ (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: [color=blue]server[/color]

PASSWORD

Please enter your Password: [color=blue][/color]
Please re-enter your Password: [color=blue][/color]

USERCTRL

Please enter ‘yes’ (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes):

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose ‘NONE’ and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 – NONE: This script will not set any firewall rules.  You are responsible
          for ensuring the security of your machine.  You are STRONGLY
          recommended to use some kind of firewall rules.
1 – STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 – MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
Choose a type of firewall (0-2): [color=blue]1[/color]

Start this connection at boot time

Do you want to start this connection at boot time?
Please enter no or yes (default no):

** Summary of what you entered **

Ethernet Interface: dsl0
User name:          peraidjole@sezampro
Activate-on-demand: No
DNS addresses:      Supplied by ISP’s server
Firewalling:        STANDALONE
User Control:      yes
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
  (But first backing it up to /etc/ppp/chap-secrets.bak)
  (But first backing it up to /etc/ppp/pap-secrets.bak)

Congratulations, it should be all set up!

Type ‘/sbin/ifup ppp0’ to bring up your xDSL link and ‘/sbin/ifdown ppp0’
to bring it down.
Type ‘/sbin/pppoe-status /etc/sysconfig/network-scripts/ifcfg-ppp0’
to see the link status.

paljenje konekcije (i kao korisnik )
[code]
/sbin/ifup ppp0
/sbin/ifdown ppp0
[/code]

ako posle azurirate kernel mora da dodate livna repoe nekako ???

any bugs yet ?

EDit
mogo bi i servis network manager da se iskljuci , ali on sam pukne i
ovako i onako 😀
O0

hace fun !