Rezultati pretrage za 'php'

[tomaja]

Od danas je postavljen novu koji je namenjen vašim pitanjima koja su vezana za Linux i podešavanje modema i mrežnih adaptera, konfiguraciju mreže, klijenata i servera, itd.
Dosadašnji postovi koji su vezani za ovu temu se prebacuju u novootvoreni forum.
Molimo sve korisnike da pitanja koja su vezana za temu umrežavanje postavljaju u ovom novom forumu
Link novog foruma Linux umrežavanje:
http://www.linuxo.com/modules.php?name=Forums&file=viewforum&f=16

linux4life

[tomaja]

Koga zanima , Cedega W i n e X 4 moze pronaci na nasoj kompilaciji sa emulatorima (kataloska oznaka emu01) . Inace, taj cd je pre samo par dana update-ovan sa Cedegom i jos par slicnih programcica
http://www.linuxo.com/htmltonuke.php?filnavn=linux_programi.html

linux4life

[bp21000]

Od problema koje sam opisivao ovde:
http://www.linuxo.com/modules.php?name=Forums&file=viewtopic&t=2388
preostao je jos samo onaj sa kopete-om, a ostale sam resio uspesno.

Ne znam zasto mi se kopete blokira… Kad obrisem “.kopeterc”, onda mi uopste ne dozvoljava da napravim novi account, jer se blokira tokom te procedure. Ako (jednom u 25 puta) uspe da prodje do momenta kada treba da se konektuje, onda mi umesto da se normalno poveze sa ICQ severom javlja nekakvu generic error i kaze da je – service unavalible. Ono sto je meni jako cudno je cinjenica da je kopete do pre tri dana radio sasvim normalno, a pokusao sam da uklonim i program i sve sto ima veze sa njim. Kad uradim $ locate kopete sistem ne nalazi nista prisutno.

Ali nakon ponovnog pokusaja instaliranja (i to one verzije koja dolazi na Update CD za MDK 10) problematicni simptomi se opet ponavljaju. Probao sam kopete na PCLinuxOS p7 gde radi sasvim normalno i bez ikakvih problema, a jedan drugar mi se takodje pozalio da mu u poslednje vreme kopete zadaje glavobolju na Slackware-u 10.0. A meni je ovaj program do pre 3-4 dana radio sasvim OK na MDK 10.

Da li neko zna kako da ga opet vratim u normalno stanje?

Osim toga, dajte preporuku za neki drugi IM klijent koji radi bez frke? Ja trenutno koristim Gaim i sa njim je sve u redu,ali mi se ne dopada sto nema malo bolji search tool, za pronalazanje i dodavanje sagovornika u listu. Jedino pretrazivanje je moguce po mail adresi, a ja ne znam nikog normalnog ko na IM serverima ostavlja adresu koja nije fake-ovana ;).

Skinuo sam jos i SIM (simple instant messenger) koji radi sasvim lepo sve ono sto zelim kao pravi ICQ klijent za KDE okruzenje, ali u njemu nikako ne uspevam da iskljucim HTML format, te da poruke koje saljem sagovornicima budu *iskljucivo” u plain text-u. Zato uglavnom ne koristim SIM.

Dakle, pomozite mi ako umete da nekako resim problem sa kopete-om. A mozda ne bi bilo lose da administrator pokrene anketu “koji IM klijent koristite?”, pa bi mi bas bilo zanimljivo da vidim rezultate. Ionako su vec bile (ili su trenutno aktivne) ankete o browseru, mail klijentu i nacinu ostvarivanja veze sa internetom, pa bi anketa o IM klijentima lepo upotnila celinu o najomiljenijim imternet alatima pod Linuxom.

Srdacno vas pozdravljam.

[che]

Da li je moguce da je smaknuta ova stranica sa servera

http://mandrake.osny.org.yu/index.php

?

[popac]

A, pa evo ti odmah ispod procitaj i sve ce ti biti jasno

http://www.linuxo.com/modules.php?name=Forums&file=viewtopic&t=2144&postdays=0&postorder=asc&start=0

[salac]

Osnova *nixa je C, pa ako zelis da budes ‘baja-programer’ baci se na savljadjivanje c/c++.
Tu je jos perl koji je fenomenalan programski jezik, (PHP je derivat perla-a, zatim postoji mod_perl za apache sto ga cini sjajnim za web aplikacije, modularan, logican itd) Jedina mana: perl je interpreterski jezik tj programi pisani u perl-u su relativno spori (sporiji od c-a, brzi od jave).
Velike nade polagane su u Kylix kao kompletno cross-platform razvojno okruzenje iza koga stoji legendarni Borland. Medjutim Borland je dalji razvoj Kylix-a gurnuo ne u drugi nego u treci plan – ne izbacuju se patch-evi za neke iritantne bug-ove, postoje problemi sa novim bibliotekama (libqt, libmysql itd)….Stvarno steta.
I naravno ne treba zaboraviti javu – jedini pravi multiplatformski jezik.

Moja preporuka : pocni sa javom ili perl-om, kasnije ces prirodno preci na c/c++ ako ti to bude trebalo.

Za sve navedene jezike postoji literatura na srpskom.

[DVSoftware]

http://www.mandrakeusers.org/index.php?showtopic=10855

god damn it

ja sam zavrshio beta verziju svog live cd-a i napakovao 1.7 gb programa na njega. Radi perfektno, dodushe kad mu se otkuca da ne detektuje scsi, neznam zbog chega.
I da netje da se pokrene na mashini koja ima <256MB ram-a, tako dje neznam zashto… prijavljuje no space left on device u toku bootovanja, x se podigne, i dalje nishta…

[Nightweaver]

Da nastavimo na http://www.linuxo.com/modules.php?name=Forums&file=viewtopic&t=2335

[sKELEton]

Naravno da sam glasao
http://www.thelinuxbox.org/polls/poll.php?mode=results&what=1

[Nightweaver]

Samo da sa vama podelim svoju radost na vest koju je jutros poslao gosn’ Volkerding:

Announcing Slackware Linux 10.0!

The first Slackware release of 2004, Slackware Linux 10.0 continues
the more than ten-year Slackware tradition of simplicity, stability,
and security.

Among the many program updates and distribution enhancements, you’ll
find two of the most advanced desktop environments available today:
GNOME 2.6.1 (including a collection of pre-compiled GNOME
applications), and KDE 3.2.3, the latest version of the award-winning
K Desktop Environment. Slackware uses the 2.4.26 kernel bringing you
advanced performance features such as the ReiserFS journaling
filesystem, SCSI and ATA RAID volume support, and kernel support for X
DRI (the Direct Rendering Interface) that brings high-speed hardware
accelerated 3D graphics to Linux. Additional kernels allow installing
Slackware using any of the journaling filesystems available for Linux,
including ext3, ReiserFS, IBM’s JFS, and SGI’s XFS. For those
Slackware users who are anxious to try the new 2.6.x kernel series, it
is fully supported by the system. A precompiled Linux 2.6.7 kernel,
modules, and source code are provided (along with complete
instructions on how to install the new kernel).

>From the beginning, Slackware has offered a stable and secure Linux
distribution for UNIX veterans as well as an easy-to-use system for
beginners. Slackware includes everything you’ll need to run a
powerful server or workstation. Each Slackware package follows the
setup and installation instructions from its author(s) as closely as
possible, offering you the most stable and easily expandable setup.

Here are some of the advanced features of Slackware 10.0:

– Runs the 2.4.26 version of the Linux kernel from http://ftp.kernel.org.
Special kernels were prepared to support hardware such as SCSI
controllers, USB keyboards and mice, parallel-port IDE devices,
IBM PS/2 machines with the Microchannel bus, and even speech
synthesizers providing access to Linux for the visually impaired
community. The performance of the 2.4.x kernel series along with
Slackware’s track record of careful attention to system security
make it the perfect choice for running your production servers.

– As an alternate choice, Slackware 10.0 includes Linux 2.6.7
source, kernel modules, and binary packages, along with a new
mkinitrd tool and instructions on using it to install the
new kernel (see /boot/README.initrd). When running a 2.6
kernel, Slackware supports udev. This is a system for
creating devices in /dev dynamically, greatly reducing device
clutter and making it easy to see what devices are actually
present in the system.

– System binaries are linked with the GNU C Library, version 2.3.2.
This version of glibc has been patched to improve compatibility
with existing binaries.

– X11R6.7.0
This is the current release of the X.Org Foundation’s X Window
System based on XFree86 4.4.0RC2. The 6.7.0 version is a new
release that includes additional hardware support, functional
enhancements and bug fixes. Font rendering is improved yet
again with recent versions of fontconfig and freetype. Through
the generosity of Bitstream, Inc., the Vera truetype font family
is included as well providing pleasing default fonts out of the
box.

– Major enhancements to the printing system include new versions
of CUPS (1.1.20) and LPRng (3.8.27). The Ghostscript interpreter
has been upgraded to ESP Ghostscript version 7.07.1 which offers
several improvements over the GNU release of Ghostscript, including
more drivers and better integration with CUPS. Two IJS servers
(printer driver suites for Ghostscript) are available in this
release: HPIJS, which supports more than 200 HP Inkjet printer
models (compared with 60 supported in Slackware 9.1), and
Gimp-Print, offering support for hundreds of printers from Canon,
Lexmark, HP, Epson, and other manufacturers.

– Installs gcc-3.3.4 as the default C, C++, Objective-C, Fortran-77,
and Ada 95 compiler. gcc-3.4.0 is available as an alternate choice.

– Support for fully encrypted network connections with OpenSSL,
OpenSSH, and GnuPG.

– Apache 1.3.31 web server with Dynamic Shared Object (DSO) support,
SSL, and PHP.

– PCMCIA, CardBus, and APM support for laptops. (pcmcia-cs-3.2.7).
Slackware also now includes hotplug support. This locates and
configures most hardware automatically as it is added (or removed)
from the system. It also loads the kernel modules required by
sound cards and other hardware at boot time.

– New development tools, including Perl 5.8.4, Python 2.3.4, and
graphical tools like Qt designer, KDevelop, and Glade.

– Updated versions of the Slackware package management tools make it
easy to add, remove, upgrade, and make your own Slackware packages.
Package tracking makes it easy to upgrade from Slackware 9.1 to
Slackware 10.0 (see UPGRADE.TXT). The slackpkg tool in /extra can
also help update from an older version of Slackware to a newer one,
and keep your Slackware system up to date. In addition, the new
slacktrack utility (in extra/) will help you build and maintain
your own packages.

– Web browsers galore! Includes Netscape Communicator version 7.1,
Konqueror 3.2.3, Mozilla 1.7 (with anti-aliased font support
and built-in junk email filtering), Epiphany 1.2.6, and Galeon
1.3.15.

– The complete K Desktop Environment (KDE) version 3.2.3, including
the KOffice productivity suite, networking tools, GUI development
with KDevelop, multimedia tools, the Konqueror web browser and
file manager, dozens of games and utilities, international language
support, and more.

– The GNU Network Object Model Environment (GNOME) version 2.6.1
(this already includes many of the updates for the upcoming 2.6.2
release).

– A collection of GTK based applications, including abiword-2.0.6,
gaim-0.78, gimp-2.0.2, gkrellm-2.2.1, gxine-0.3.3, and
pan-0.14.2.91.

– Large repository of extra software packages compiled and ready to
run. This includes various window managers, support for 3Dfx gaming
cards, OpenMotif-2.2.2, the K3b CD burning application for KDE,
libsafe (advanced buffer overflow protection for additional
security), ISDN support, additional 802.11 drivers, and much more
(see the /extra directory).

– Many more improved and upgraded packages than we can list here. For
a complete list of core packages in Slackware 10.0, see this file:

ftp://ftp.slackware.com/pub/slackware/slackware-10.0/PACKAGES.TXT

– Another Slackware exclusive: Slackware’s ZipSlack installation
option is the fastest, _easiest_ Linux installation ever. ZipSlack
provides a basic text-based Linux system as a 45 megabyte ZIP archive.
Simply unzip on any FAT or FAT32 partition, edit your boot partition
in the LINUX.BAT batch file, and you can be running Linux in less
than five minutes. The ZipSlack installation includes everything you
need to network with Linux (including Ethernet, token ring, and
PPP), and extend the system with additional software packages such as
X. A ZipSlack system will even fit on a Zip(TM) disk, so you can
carry a personal Linux system with you to run on any PC with a
Zip(TM) drive.

Downloading Slackware 10.0:
—————————

The full version of Slackware Linux 10.0 is available for download from
the central Slackware FTP site hosted by our friends at http://www.cwo.com:

ftp://ftp.slackware.com/pub/slackware/slackware-10.0/

The ZipSlack version of Slackware can be downloaded from:

ftp://ftp.slackware.com/pub/slackware/slackware-10.0/zipslack/

If this site is busy, see the list of official mirror sites here:

http://slackware.com/getslack/

We will be setting up BitTorrent downloads for the official ISO images.
Stay tuned to http://slackware.com for the latest updates.