Ћирилица

[Uros09]

Da rezimiramo:
– ima¹ u /mnt direktorijumu poddirektorijum /usb, tj. /mnt/usb onda, ako ti je podignut X u terminalu kao su kuca¹ mount -t vfat /dev/sda1 /mnt/usb
cd /mnt/usb
ls
sada treba da se vidi sadr¾aj flash-a

Epilog :
root@darkstar:/mnt/usb# mount -t vfat /dev/sda1 /mnt/usb
mount: /dev/sda1 is not a valid block device

😈

U mnt imam usb ,promenio sam etc/fstab kao sto je kod tebe i sada izgleda:
dev/sda1 mnt/usb-flash vfat defaults 1 0

[Uros09]

Nema veze kada ukucam mount /mnt/sda1 ili mount /dev/sda1 ili
mount /dev/usb dobijem isto:

can’t find /mnt/sda1 in /etc/fstab or /etc/mtab

Izgleda nije u redu /etc/fstab ?

Posle mount /mnt/usb dobijem :
missing codepage or other error
In some cases useful info is found in syslog – try
dmesg | tail or so

Da li je mozda problem sto je Storage Device koriscen prethodno pod Windowsom ?

[Uros09]

Evo ostatka dela za koji mislim da je relevantan :

Initializing USB Mass Storage driver…
usb.c: registered new driver usb-storage
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: JetFlash Model: TS256MJF110 Rev: 0.00
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
SCSI device sda: 494592 512-byte hdwr sectors (253 MB)
sda: Write Protect is off
sda:pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
sda1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0

[Uros09]

Posle dmesg d sam dobio sledece:

on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=2491/255/63, UDMA(33)
hda: attached ide-cdrom driver.
hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hdc: hdc1 hdc2 hdc3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2138.800 MB/sec
32regs : 1432.800 MB/sec
pIII_sse : 4052.400 MB/sec
pII_mmx : 3492.000 MB/sec
p5_mmx : 4462.000 MB/sec
raid5: using function: pIII_sse (4052.400 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun …
md: … autorun DONE.
itd…

[Uros09]

U etc/fstab sam dodao liniju:
/dev/sda /mnt/usb vfat user,rw,uid=1000,gid=0 0 0

tako da mi etc/fstab sada izgleda ovako:
/dev/hdc2 swap swap defaults 0 0
/dev/hdc3 / ext3 defaults 1 1
/dev/cdrom /mnt/cdrom iso9660 noauto,owner,ro 0 0
/def/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
/dev/sda /mnt/usb vfat user,rw,uid-1000,gid=0 0 0
Samo sto je veci razmak izmedju stavki.

kada ukucam mount /mnt/usb dobijem ovo:

mount: wrong fs type, bad option, bad superblock on /dev/sda,
missing codepage or other error
In some cases useful info is found in syslog – try
dmesg | tail or so

Kada ukucam dmesg | tail dobijem ovo:

SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
FAT: bogus logical sector size 20487
VFS: Can’t find a valid FAT filesystem on dev 08:00.
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0

Imate li resenje za ove probleme ?

[Uros09]

Problem resen zahvaljujuci Lyb u u temi
Instaliranje Slacware.

Administrator moze obrisati ovu temu.

[Uros09]

Dobro Lyb to je bila samo stamparska greska.

Ukucao sam mount /mnt/usb i dobio:
mount: mount point /mnt/usb does not exist

Sta je mount point i kako ne postoji ?

[Uros09]

Uspeo sam da ga pokrenem.
Upravo vas gledam uz pomoc kablovskog modema SB5100.
Ne znam sta je bilo ,verovatno je trebalo restartovati masinu.
Sada je sve u redu.
Nece vise biti pokretanja tema koje su vec obradjene na forumu.
Nema vise vode u usima dok sam na internetu zbog kucanja inpulsa na telefonu.

Lyb,
Ma sta ti mislio ti si veliki poznavala linuxa.I kad “nemas pojima” o necemu
resavas problem.

Hvala

[Uros09]

U etc/rc.d/rc.inet1.conf pise:

# Ovaj fajl sadrzi podesavanja konfiguracije za mrezne interfejse.
# Ako je USE_DHCP[0] podeseno na “yes” ovo je vaznije od bilo kog
# drugog podesavanja.
# Ako nemas interfejs ostavi null vrednost (“”).

#Config informacije za eth0:
IPADDR[0]=””
NETMASK[0]=””
USE_DHCP[0]=””
DHCP_HOSTNAME[0]=””

#Config information for eth1:
isto samo sa [1]

#za eth2:
Isto samo sa [2]

Jel to taj fajl ? Meni opasno lici.
Stavio sam USE_DHCP[0]=”yes” i u konzoli posle
upisao #ifconfig etho up i ukljucio sam browser ali
nista.

[Uros09]

Kada ukucam:
mount -a -t msdos /dev/hdc /mnt/jetflash ili
mount -a -t msdos /dev/hdc1 /mnt/jetflash

dobijem ovo:
mount: wrong fs type ,bad option,bad superblock on /dev/hdc,
missing codepage or other error
In some cases useful info is
dmesg | tail or so

Posle ukucanog popcevog koda koji je naveden u etc/fstab
kada ukucam

mount /mnt/usb
dobijem:
[mntent]:warning: no final newline at the end of etc/fstab
mount: mount point /mnt/usb does not exist

isto i posle mount /dev/sda1

kada sam lupio enter posle koda u etc/fstab i ukucao
mount mnt/usb dobio sam
mount:can’t find mnt/usb in /etc/fstab or /etc/mtab

Sve sto sam uradio je pravljenje direktorijuma u kome nema nista.

[Аутор]

Чланци