Ћирилица

[pjotr]

O0 Problem resen instalaciom najnovije verzije Pclos-a.
Hvala vam na pomoci

[pjotr]

U pitanje je PClinuxOS Live cd i najverovatnije je da je to jedan od prvih izdanja koja su izasla (secam se da sam ga burn-ovao  sa Mikro DVD ja od prosle godine. Sad skidam zadnju verziju pclos-a pa cu da vidim,najverovatnije je to u pitanju.
Verzija kernela je 2.6.18.8.tex5
Za svaki slucaj cu skinuti i Ubuntu 8.10.

[pjotr]

Koliko god cheprkao po xorg.conf i menjao parametre on nakon restarta promeni u rezoluciju koju napishem ali posle toga nece da pokrene xserver i onda opet mora XFdrake i da vracam na 800×600 kako bi pokrenuo x server.
Sto se tice Control Centra,sada trenutno su instalirani i810 drajveri,probao sam i i740 i dalje ne mogu da nateram smrada da radi na 1024×768. Sada upgradujem sve iz synaptica pa cu da vidim da li ce nesto proraditi.
Skinuo sam drajvere ali opet,neznam kako da ih pokrenem iz te tar.gz arhive. imam fajl readme i fajl build i gomilu fraza koje me samo jos vise zbunjuju.

[code]# File generated by XFdrake (rev 57713)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section “Files”
    # font server independent of the X server to render fonts.
    FontPath “unix/:-1”
   
    # minimal fonts to allow X to run without xfs
    FontPath “/usr/share/fonts/misc:unscaled”
EndSection

Section “Extensions”
    Option “Composite”
EndSection

Section “ServerFlags”
    #DontZap # disable (server abort)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    #DontZoom # disable / (resolution switching)
EndSection

Section “Module”
    Load “dbe” # Double-Buffering Extension
    Load “v4l” # Video for Linux
    Load “extmod”
    Load “type1”
    Load “freetype”
EndSection

Section “InputDevice”
    Identifier “Keyboard1”
    Driver “kbd”
    Option “XkbModel” “pc105”
    Option “XkbLayout” “us”
    Option “XkbOptions” “compose:rwin”
EndSection

Section “InputDevice”
    Identifier “Mouse1”
    Driver “mouse”
    Option “Protocol” “ExplorerPS/2”
    Option “Device” “/dev/mouse”
EndSection

Section “InputDevice”
    Identifier “Mouse2”
    Driver “evdev”
    Option “product” “0x0033”
    Option “HWheelRelativeAxisButtons” “7 6”
    Option “vendor” “0x04b4”
EndSection

Section “InputDevice”
    Identifier “SynapticsMouse1”
    Driver “synaptics”
    Option “SHMConfig” “on”
EndSection

Section “Monitor”
    Identifier “monitor1”
    VendorName “Generic”
    ModelName “Flat Panel 1024×768”
    HorizSync 31.5-55
    VertRefresh 40-70
   
    # TV fullscreen mode or DVD fullscreen output.
    # 768×576 @ 79 Hz, 50 kHz hsync
    ModeLine “768×576”    50.00  768  832  846 1000  576  590  595  630
   
    # 768×576 @ 100 Hz, 61.6 kHz hsync
    ModeLine “768×576”    63.07  768  800  960 1024  576  578  590  616
EndSection

Section “Device”
    Identifier “device1”
    BoardName “”
    Driver “fbdev”
    Option “DPMS”
EndSection

Section “Screen”
    Identifier “screen1”
    Device “device1”
    Monitor “monitor1”
    DefaultColorDepth 16
   
    Subsection “Display”
        Depth 8
        Modes “800×600” “640×480”
    EndSubsection
   
    Subsection “Display”
        Depth 15
        Modes “800×600” “640×480”
    EndSubsection
   
    Subsection “Display”
        Depth 16
        Modes “800×600” “640×480”
    EndSubsection
   
    Subsection “Display”
        Depth 24
        Modes “800×600” “640×480”
    EndSubsection
EndSection

Section “ServerLayout”
    Identifier “layout1”
    InputDevice “Keyboard1” “CoreKeyboard”
    InputDevice “Mouse1” “CorePointer”
    InputDevice “Mouse2” “SendCoreEvents”
    InputDevice “SynapticsMouse1” “AlwaysCore”
    Screen “screen1”
EndSection
[/code]
Mozda i ovo pomogne :
[code][root@localhost petar]# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:27ac] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Unknown device [8086:27ae] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01)
02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01)
02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ – PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01)
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)[/code]

[pjotr]

Ok uspeo sam da podignem x server tako sto sam pokrenuo XFdrake iz konzole i sa 1024×768 vratio na 800×600

[pjotr]

Ewo sad od komsije kucam,nemogu da pokrenem PClos.
Izbaci mi konzolu a 
kad otkucam startx u konzoli izbacuje mi

(EE) open dev/fb0 : No such file or directory
(EE) No devices detected.

Fatal server error:
no screens found
XIO: fatal IO error 104 (connection reset by peer) on X server “:0.0”
after 0 requests (0 known processed) with 0 events remaining.

Da li da reinstaliram Pclos ili postoji neko resenje i za ovo sad? Ili mi je sudjeno da radim u 800×600 na 57Hz

[pjotr]

Naisao sam i ja na to resenje i skinuo sam pre sat vremena 915resolution ali mi izbacuje sledece
[code]
Intel 800/900 Series VBIOS Hack : version 0.5.3

Intel chipset detected.  However, 915resolution was unable to determine the chipset type.
Chipset Id: 27ac8086
Please report this problem to [email protected][/code]

U Control Centru u odeljku Hardware u Video gde bi trebalo da stoji ime graficke karte pise [code]null[/code]
Inace kad pokusam da povecam rezoluciju jednostawno mi izbaci crni ekran i posle odredjenog vremena mi vrati na
rezoluciju 800×600.

Kada desnim klikom na desktop izaberem opciju Configure Desktop, u kartici display mi je samo prikazano 800×600 i 640×480 sa najvecom frekvencijom osvezavanja od 57hz

[pjotr]

Nasao sam na internetu drajvere za intel 950 sa intelovog sajta,posto predpostavljam da je u tome problem,jer mi pise da imam instalirane drajvere za i810
ali neznam kako da ih instaliram

Intel-3.4.3006-20051209.i386.tar.gz

Otvorio sam README ali nista konkretno ne pise o instalaciji.

[Аутор]

Чланци