[nucleuswizard]

Zaboravio sam da pitam da li uz Kvorld 300 dolazi daljinski i da li ja mogu da priključim ostale kablove koji dolaze uz karticu jer moj laptop ima samo sledeće portove:

The nx7300 has a standard business palette of ports:

    * 3 USB 2.0 ports (1 on the left, 2 on the right)
    * PCMCIA card slot (left side)
    * FireWirePort (left side)
    * Monitor out port (rear side)
    * Modem port (left side)
    * Ethernet LAN port (left side)
    * Microphone jack(right side)
    * Headphone line-out (right side)
    * Power jack (rear side)
    * Kensington lock (left side)
A ovo pitam jer sam na ovoj adresi video da ima daljinski a na Kvorld sajtu se nigde ne spominnje:

          http://www.itsvet.com/tekst/kworld-eksterni-tv-tjuneri/255/

[nucleuswizard]

Da to je bila i jedna od mojih opcija dok nisam video da tvoje čedo košta 104 evra a moje 44 evra,razlika je “tričavih” 60 evra  :biggrin: :biggrin: :biggrin:

[nucleuswizard]

Video sam u Gigatronu da imaju 300u mada to samo piše na proizvodu :biggrin: :biggrin: Trebao bih da je uzmem u narednih desetak dana pa ću ti javiti utiske……

[nucleuswizard]

I da li je na kraju u potpunosti proradila Kworld USB 300U FM?Kakav je kvalitet slike,zvuka,vredili?

[nucleuswizard]

Hvala ti puno,uspeo sam iz prve ali me zanima gde si naucio ovako python posto me mnogo zanima a i ovo sto si mi poslao bilo je samo copy-paste a bas bih zeleo da naucim 😎 😎 😎 😎 😎 😎 :biggrin: :biggrin: :biggrin: :biggrin: :biggrin: :biggrin: :biggrin: :biggrin: :biggrin: :biggrin: :biggrin: :biggrin:

[nucleuswizard]

Hvala svima na ovako iscrpnim odgovorima  O0 ipak cu morati da sacekam,kako rece Milosk, da stvari poprave u snd_hda_intel drajveru kod ALSA-e.Pozdrav svima i jos jednom hvala

[nucleuswizard]

Ne verzija je 32-bitna i sve sam aruzirao kao i i686 a ono sto mi se ispisuje u /var/log/messages kada pokrenem sledecu komandu

/usr/sbin/slmodemd -c BULGARIA –alsa hw:0,6

je:

Resolved address “xml:readonly:/etc/gconf/gconf.xml.mandatory” to a read-only configuration source at position 0
May  4 22:06:11 localhost gconfd (root-3198): Resolved address “xml:readwrite:/root/.gconf” to a writable configuration source at position 1
May  4 22:06:11 localhost gconfd (root-3198): Resolved address “xml:readonly:/etc/gconf/gconf.xml.defaults” to a read-only configuration source at position 2
May  4 22:06:24 localhost firmware_helper[3212]: Loading of /lib/firmware/bcm43xx_microcode5.fw for (unknown) driver failed: No such file or directory
May  4 22:06:24 localhost kernel: bcm43xx: Error: Microcode “bcm43xx_microcode5.fw” not available or load failed.
May  4 22:06:24 localhost kernel: bcm43xx: core_up for active 802.11 core failed (-2)
May  4 22:06:26 localhost NetworkManager: nm_device_802_11_wireless_scan (): could not trigger wireless scan on device __tmp1804289383: No such device

[nucleuswizard]

Sve sam uradio kako ste rekli ali i dalje mi se javlja sledeci problem.Posto moram da kereiram port komandom

/usr/sbin/slmodemd -c BULGARIA –alsa hw:0,6

onda se ispise sledece:

SmartLink Soft Modem: version 2.9.11 Mar 30 2006 00:30:39
symbolic link `/dev/ttySL0′ -> `/dev/pts/3′ created.
modem `hw:0,6′ created. TTY is `/dev/pts/3′
Modem device: `/dev/ttySL0′

Sada pokrenem Network Managera i on bez problema nadje modem,zatim sam otisao u wvdial.conf izmenio sto je trebalo i sacuvao.Kada na Network Manageru sada ukljucim Activate on samo otvori prozor i nista ne radi ali za to vreme u terminalu gde je upisana komanda

SmartLink Soft Modem: version 2.9.11 Mar 30 2006 00:30:39
symbolic link `/dev/ttySL0′ -> `/dev/pts/3′ created.
modem `hw:0,6′ created. TTY is `/dev/pts/3′
Modem device: `/dev/ttySL0′

izlazi sledeca greska(u Network manager idalje stoji otvoren prozor)

error: cannot setup hw params for playback: Invalid argument
error: cannot setup hw params for playback: Invalid argument
error: cannot setup hw params for playback: Invalid argument
error: cannot setup hw params for playback: Invalid argument

Kada odradim komandu aplay -l ono izbacuje sledece:

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

[nucleuswizard]

Evo wvdial.conf:

[Dialer Defaults]
Modem = /dev/ttySL0
Baud = 460800
Init = ATZ
Init2 = AT Q0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
ISDN = 0
Init3=
Modem Type = Analog Modem
Phone = 231312312
Username = fsfs
Password = jhjh
Dial Prefix =
Dial Attemtps = 2
Dial Command = ATDT
Ask Password = 0
Auto Reconnect = 0
Carrier Check = 1
Stupid mode = 1
Idle Seconds = 0
Auto DNS = 1
Init1 = ATZ

A ono Query sam probao sa KPPP pa sam onda presao na wvdial

[nucleuswizard]

Zaustavio sam slmodemd service izbrisao onaj iz /usr/bin.Uzeo wvdial.conf napravio sve i pokrenuo wvdial a on mi zibacuje gresku NO CARRIER u medjuvremenu dok mi je pokrenut wvdial tamo gde sam pokrenuo slmodem izlazi sledece

slmodemd -c SLOVENIA –alsa hw:0,6
SmartLink Soft Modem: version 2.9.11 Mar 30 2006 00:30:39
symbolic link `/dev/ttySL0′ -> `/dev/pts/2′ created.
modem `hw:0,6′ created. TTY is `/dev/pts/2′
Modem device: `/dev/ttySL0′
error: cannot setup hw params for playback: Invalid argument
error: cannot setup hw params for playback: Invalid argument
error: cannot setup hw params for playback: Invalid argument
error: cannot setup hw params for playback: Invalid argument
error: cannot setup hw params for playback: Invalid argument
error: cannot setup hw params for playback: Invalid argument
error: cannot setup hw params for playback: Invalid argument

izgleda da ovo hw:0,6 pravi problem ali ja uopste ne znam sta je to jer sam ja tu komandu samo iskopirao iz nekog uputstva

[Autor]

Članci