Napravljene poruke na forumu
-
AutorČlanci
-
lukicUčesnik
Strpite se malo dok ne izadje konacna verzija Kubuntu 9.04. Ipak je ovo alfa softver, mora da ima bagova.
Ja posteno ni ne razmisljam o tome da ce Kubuntu ikad biti bolji od Ubunta jer se Ubuntu ipak posvecuje vise paznje, ali volim KDE pa koliko god Kubuntu bio bagovit uvek ce mi biti drazi. 😉lukicUčesnikProbaj Keryx. Ekstra je. Radi na Windowsu i Linuxu.
Ja ga stalno koristim.lukicUčesnikOk. Ako nece, nema veze. Hvala na trudu.
A jel bi mogao mozda neki onaj Pilot univerzalni da se namesti preko keytouch-a?
I jel znas sto mi ostaje ton sa TV-a kad ugasim tvtime?lukicUčesnikEvo ga dmesg
lukicUčesniklukicUčesnikNista se ne desava kad pritiskam tastere posle
Event type 20 (Repeat)
Testing … (interrupt to exit)
Bolje da ga batalimo.
Hvala ti sto si se iscimao da pomognes.
Vazno mi je da mi radi tv. Daljinski i nije bitan.
Jel mozes jos samo da mi kazes kako najlakse da poredjam kanale u tvtime kako mi odgovara i sto kad ga ugasim i dalje cujem ton sa tv-a?lukicUčesnikmilos@milos:~$ sudo evtest /dev/input/event6
Input driver version is 1.0.0
Input device ID: bus 0x1 vendor 0x1131 product 0x0 version 0x1
Input device name: “saa7134 IR (LifeView/Typhoon Fl”
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 2 (1)
Event code 3 (2)
Event code 4 (3)
Event code 5 (4)
Event code 6 (5)
Event code 7 (6)
Event code 8 (7)
Event code 9 (8)
Event code 10 (9)
Event code 11 (0)
Event code 28 (Enter)
Event code 113 (Mute)
Event code 114 (VolumeDown)
Event code 115 (VolumeUp)
Event code 116 (Power)
Event code 129 (Again)
Event code 158 (Back)
Event code 159 (Forward)
Event code 368 (Language)
Event code 371 (Angle)
Event code 372 (Zoom)
Event code 373 (Mode)
Event code 386 (Tuner)
Event code 392 (Audio)
Event code 393 (Video)
Event code 402 (ChannelUp)
Event code 403 (ChannelDown)
Event type 20 (Repeat)
Testing … (interrupt to exit)milos@milos:~$ sudo dpkg-reconfigure lirc
* Stopping remote control daemon(s): LIRC [ OK ]
* Reloading kernel event manager… [ OK ]
* Loading LIRC modules [ OK ]
* Unable to load LIRC kernel modules. Verify your
* selected kernel modules in /etc/lirc/hardware.confPosle sudo dpkg-reconfigure lirc sam odabrao ovu karticu:
[code]Flyvideo 98FM (LR50Q) / Typhoon TView TV/FM Tuner (card=36)[/code]
Onda sam odabrao Custome, i tu je kraj.
Probao sam i drugu karticu i Direct TV Reciver ali isto se desava.milos@milos:~$ lsmod
Module Size Used by
w83l785ts 13456 0
asb100 24340 0
hwmon_vid 11264 1 asb100
i2c_dev 14728 0
ppp_deflate 12800 0
zlib_deflate 28312 1 ppp_deflate
bsd_comp 13696 0
ppp_async 17024 1
crc_ccitt 10112 1 ppp_async
ipv6 263972 10
ppp_generic 32668 7 ppp_deflate,bsd_comp,ppp_async
slhc 14208 1 ppp_generic
nls_iso8859_1 12032 1
nls_cp437 13696 1
vfat 18816 1
fat 57376 1 vfat
binfmt_misc 16904 1
rfcomm 44432 2
sco 18308 2
bridge 56980 0
stp 10628 1 bridge
bnep 20480 2
l2cap 30464 16 rfcomm,bnep
ppdev 15620 0
cpufreq_ondemand 14988 0
cpufreq_powersave 9856 0
cpufreq_conservative 14600 0
cpufreq_stats 13188 0
freq_table 12672 2 cpufreq_ondemand,cpufreq_stats
cpufreq_userspace 11396 0
container 11520 0
video 25104 0
output 11008 1 video
sbs 19464 0
pci_slot 12552 0
sbshc 13440 1 sbs
wmi 14504 0
battery 18436 0
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
ac 12292 0
lp 17156 0
saa7134_alsa 19872 0
tuner_simple 22288 1
tuner_types 22400 1 tuner_simple
tea5767 14852 0
tuner 36036 0
evdev 17696 6
nvidia 4717460 22
psmouse 45200 0
saa7134 153556 3 saa7134_alsa
serio_raw 13444 0
ir_common 53764 1 saa7134
compat_ioctl32 9344 1 saa7134
v4l2_common 24576 2 tuner,saa7134
pcspkr 10624 0
videodev 47488 3 tuner,saa7134,v4l2_common
hsfpcibasic2 71344 2
btusb 19736 3
v4l1_compat 21892 1 videodev
videobuf_dma_sg 20612 2 saa7134_alsa,saa7134
hsfserial 28964 4 hsfpcibasic2
snd_intel8x0 37532 4
bluetooth 61924 11 rfcomm,sco,bnep,l2cap,btusb
videobuf_core 26372 2 saa7134,videobuf_dma_sg
tveeprom 20228 1 saa7134
hsfengine 1308096 2 hsfpcibasic2,hsfserial
snd_ac97_codec 111652 1 snd_intel8x0
hsfosspec 106348 6 hsfpcibasic2,hsfserial,hsfengine
hsfsoar 101720 1 hsfpcibasic2
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46848 0
snd_mixer_oss 22784 2 snd_pcm_oss
snd_pcm 83204 4 saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 10884 0
snd_seq_oss 38528 0
snd_seq_midi 14336 0
snd_rawmidi 29824 1 snd_seq_midi
parport_pc 39204 1
parport 42604 3 ppdev,lp,parport_pc
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29960 2 snd_pcm,snd_seq
snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 63268 17 saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
button 14224 0
soundcore 15328 2 snd
shpchp 37908 0
pci_hotplug 35236 1 shpchp
snd_page_alloc 16136 2 snd_intel8x0,snd_pcm
i2c_nforce2 14468 0
i2c_core 31892 11 w83l785ts,asb100,i2c_dev,tuner_simple,tea5767,tuner,nvidia,saa7134,v4l2_common,tveeprom,i2c_nforce2
nvidia_agp 14492 1
agpgart 42184 2 nvidia,nvidia_agp
ext3 133256 1
jbd 55444 1 ext3
mbcache 16004 1 ext3
usb_storage 81728 1
sr_mod 22212 0
cdrom 43168 1 sr_mod
sd_mod 42264 6
crc_t10dif 9984 1 sd_mod
libusual 27156 1 usb_storage
sg 39732 2
ata_generic 12932 0
pata_amd 18692 5
pata_acpi 12160 0
libata 177312 3 ata_generic,pata_amd,pata_acpi
scsi_mod 155212 5 usb_storage,sr_mod,sd_mod,sg,libata
ohci_hcd 31888 0
ehci_hcd 43276 0
dock 16656 1 libata
forcedeth 61328 0
usbcore 148848 7 btusb,hsfosspec,usb_storage,libusual,ohci_hcd,ehci_hcd
thermal 23708 0
processor 42156 1 thermal
fan 12548 0
fbcon 47648 0
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
fuse 60828 5Ako mozes da mi pogledas i lircrc fajl, mislim da sam njega nesto cackao ranije kad sam sam pokusavao da sredim daljinac i sad vidim da je na spanskom pa mi je sumljiv:
#Inicia o apaga tvtime
begin
prog = irexec
button = 1
mode = tvtime
config = tvtime &
end
begin tvtime
#sube o baja un canal
begin
prog = irexec
button = CH_UP
config = tvtime-command CHANNEL_UP
end
begin
prog = irexec
button = CH_DOWN
config = tvtime-command CHANNEL_DOWN
end
#pantalla completa
begin
prog = irexec
button = Full_Screen
config = tvtime-command TOGGLE_FULLSCREEN && sleep 1
end
#Apaga tvtime
begin
prog = irexec
button = Power
config = tvtime-command QUIT
end
#Controla volumen
begin
prog = irexec
button = VOL_DOWN
config = tvtime-command LEFT
end
begin
prog = irexec
button = VOL_UP
config = tvtime-command RIGHT
end
#Salta al canal anterior
begin
prog = irexec
button = Recall
config = tvtime-command CHANNEL_PREV
end
#Silencia el volúmen
begin
prog = irexec
button = Mute
config = tvtime-command TOGGLE_MUTE
end
end tvtimeAko ti je ovo cimanje da ga ostavimo dok ne izadje 9.04 pa da posle probamo od pocetka. Mozda sam ja ovde nesto zeznuo ranije.
lukicUčesnikEvo odradio sam.
lukicUčesnikUradio sam ovo sto si napisao i kad sam probao da snimim novi lircd.conf dobijem:
irrecord – application for recording IR-codes for usage with lirc
Copyright (C) 1998,1999 Christoph Bartelmus([email protected])
irrecord: initializing ‘/dev/input/event6’
This program will record the signals from your remote control
and create a config file for lircd.A proper config file for lircd is maybe the most vital part of this
package, so you should invest some time to create a working config
file. Although I put a good deal of effort in this program it is often
not possible to automatically recognize all features of a remote
control. Often short-comings of the receiver hardware make it nearly
impossible. If you have problems to create a config file READ THE
DOCUMENTATION of this package, especially section “Adding new remote
controls” for how to get help.If there already is a remote control of the same brand available at
http://www.lirc.org/remotes/ you might also want to try using such a
remote as a template. The config files already contain all
parameters of the protocol used by remotes of a certain brand and
knowing these parameters makes the job of this program much
easier. There are also template files for the most common protocols
available in the remotes/generic/ directory of the source
distribution of this package. You can use a template files by
providing the path of the file as command line parameter.Please send the finished config files to so that I
can make them available to others. Don’t forget to put all information
that you can get about the remote control in the header of the file.Press RETURN to continue.
Hold down an arbitrary button.
irrecord: gap not found, can’t continue
irrecord: closing ‘/dev/input/event6’???
lukicUčesnikEVENTS=”/dev/input/event6 sam odradio kao root i snimio.
Sad sam obrisao i inputlirc.
Kad otkucam sudo gedit /etc/lirc/hardware.conf dobijem:# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE=”Flyvideo 98FM (LR50Q) / Typhoon TView TV/FM Tuner (card=36)”
REMOTE_MODULES=”devinput”
REMOTE_DRIVER=””
REMOTE_DEVICE=”/dev/lirc0″
REMOTE_LIRCD_CONF=”life-view/lircd.conf.flyvideo”
REMOTE_LIRCD_ARGS=””#Chosen IR Transmitter
TRANSMITTER=”Custom”
TRANSMITTER_MODULES=””
TRANSMITTER_DRIVER=””
TRANSMITTER_DEVICE=””
TRANSMITTER_LIRCD_CONF=””
TRANSMITTER_LIRCD_ARGS=””#Enable lircd
START_LIRCD=”true”#Don’t start lircmd even if there seems to be a good config file
#START_LIRCMD=”false”#Try to load appropriate kernel modules
LOAD_MODULES=”true”# Default configuration files for your hardware if any
LIRCMD_CONF=””#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn’t have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to “false”
FORCE_NONINTERACTIVE_RECONFIGURATION=”false”
START_LIRCMD=””Uopste ga nema ovaj deo:
# Run “lircd –driver=help” for a list of supported drivers.
DRIVER=”dev/input”
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE=”/dev/input/event6″
MODULES=”” -
AutorČlanci