X problem – sredjeno

[debelizmaj]

Evo sta mi se desava.
Instaliram Slack 10.1, pokrenem xorgconfig i podesim parametre za monitor i ostalo.Kada ukucam startx x jednostavno padne.Bez ikakvih podesavalja mi radi u 1024×768 rezoluciji ali sa 60 hz osvezavanjem.Skinuo sam drajvere za graficku(radeon 9200) prebacio ih u tgz i instalirao.medjutim oni u etc/X11 prave xfree skript iako su drajveri za xorg.Sta da radim da bi mi X proradio kako valja?

[mtm76]

ako si skinuo pravu verziju drajvera (znaci za xorg6.8 x86), pretvoriš ih u tgz, pa instaliras (sto si uradio). U ovom trenutku nisu kompajlirani fglrx moduli, pa radiš to ručno
cd /lib/modules/fglrx/build_mod
sh make.sh
cd ..
sh make_install.sh
čime si kompajlirao odgovarajući modul. Još treba da podesiš Xorg, i to naredbom
fglrxconfig (a ne xorgconfig). Naravno ovo sve obavi u init 3 (otkucaj init 3). On ti je po defaultu, ako nisi stavi da se loguješ i grafičkog okruženja.

[debelizmaj]

elem, to sam vec uradio.Ali nista.
Drajver je fglrx_6_8_0-8.8.25-1.i386.tgz i pravi u /etc/X11 XF86Config-4 fajl.
Sta da radim da ga osposobim.Ja sam probao da ga preimenujem(u nedostatku zdravih ideja) u xorg.conf ali, naravno, x se tada rusi.Sada koristim default xorg.conf koji je bio posle instaliranja. Bilo kakvo bakcanje u njemu zavrsava se time da x ne moze da se podigne.Ovih 60hz mi bas bodede oci.

[debelizmaj]

upravo sam se setio necega.Ovaj problem sam imao i ranije na suse 8.0 i resavao sam ga tako sto bi jednostavno promenio da mi monitor nije 14incha vec 17 i sve je funkcionisalo ok.
Kako u slacku da vidim kakav mi on monitor vidi 14icu ili 17icu????

[mtm76]

1. skini najnovije drajvere sa ATI-jeve strane, jer ako ti taj stvarno pravi XF86Config-4, onda je u pitanju stariji drajver (nekih pola godine)… btw, dovoljno je da linkuješ
ln -s XF86_nesto xorg.conf
i radiće jer nema razlike.
2. jesi li siguran da si uradio sve što sam ti napisao
3. veličina monitora u inčima nema nikakve veze ni sa čim… bitna je maksimalna podržana rezolucija i frekvencija…
4. x se ruši… pojasni malo šta ti to znači… možda si stavi samo previsoku frekvenciju osvježavanja

[debelizmaj]

1. uradio sam ln -s i x nece da se podigne. ukucam start x ekran pocrni i vrati se u konzolu.
2.make i ostalo sam uradio odmah po instalaciji drajvera i uradio sam i posle kad si mi rekao,za svaki slucaj
3.mislio sam i ja da velicina nema veze, medjutim iskustvo mi govori da ipak ima.u raznim suse(8.0, 9.1,9.2) verzijama mi je uvek posle instalacije prijavljivao 14icu i osvezavao na 60hz.kada bi mu podesio da mi je monitor samsung 753s sve je radilo normalno.
4.ovako, bilo kakvo petljenje u xorg.conf dovodi to toga da kada ga ja snimim i pokrenem startx on se vrati u konzolu i napise da postoji greska.
kada posle instalacije slacka ne podesavam xorg i pokrenem startx on radi na 60hz i 1024×768, i prilikom dizaznja mi je prvo malo izdeformisana slika pa se vrati u normalu.
skidam driver pa videcu…

[mtm76]

1. uradio sam ln -s i x nece da se podigne. ukucam start x ekran pocrni i vrati se u konzolu.
3.mislio sam i ja da velicina nema veze, medjutim iskustvo mi govori da ipak ima.u raznim suse(8.0, 9.1,9.2) verzijama mi je uvek posle instalacije prijavljivao 14icu i osvezavao na 60hz.kada bi mu podesio da mi je monitor samsung 753s sve je radilo normalno.
4.ovako, bilo kakvo petljenje u xorg.conf dovodi to toga da kada ga ja snimim i pokrenem startx on se vrati u konzolu i napise da postoji greska.
kada posle instalacije slacka ne podesavam xorg i pokrenem startx on radi na 60hz i 1024×768, i prilikom dizaznja mi je prvo malo izdeformisana slika pa se vrati u normalu.
skidam driver pa videcu…

koju grešku izbaci… to što kažeš ne znači ništa… može biti milion razloga…
ako si ubjeđen da veličina monitora je bitna osobina, ti onda uzmi pa promjeni tu veličinu… samo ne znam gdje 😉
a to što ti je slika deformisana… pa jel ti monitor podržava toliku rezoluciju… ako je 17″, trebao bi raditi bez problema 1024×768@70 Hz… ako je 15″, onda 800×600@70Hz… a ti stavi 60Hz za svaki slučaj… 60Hz ti je maksimalna vertikalna frekvencija… max vert refresh rate, kada uradiš fglrxconfig…
ako ti 3D drajveri ne rade, uvjek možeš podesiti X sa xorgconfig i biće sve po starom

[debelizmaj]

Zna li neko kako mogu videti u slacku koji mi je monitor prijavljen i kako se menja.Promenio sam 3 graficke (ati, nvidia i sis) i kod svake imam isti problem, 1024×768 60hz bez da se menja. Ne mogu rezoluciju da spustim ni pomocu “screen resize & rotate”.O xorgconfig da ne pricam.

[mtm76]

e jesi zapeo za taj monitor… SHVATI DA SU SVI MONITORI PLUG ‘N’ PLAY i svi imaju isti generički drajver… nema veze bilo koji da spojiš… bitna je rezolucija i frekvencija… to što neka distribucija prepozna marku monitora, znači da automatski podesi maksimalnu rezoluciju i frekvenciju… na slacku ti to radiš ručno…
ajd skini drajver
fglrx_6_8_0-8.14.13-1.i386
pa deinstaliraj postojeći, i izbriši ručno folder /lib/modules/fglrx
pa onda instaliraj ponovo, pa onda
[code]# fglrxconfig

==============================================================================
ATI – FireGL – WORKSTATION GRAPHICS ACCELERATOR
==============================================================================

This program will create the ATI “xorg.conf” file
– based on your selections – for the following video cards…

– ATI Radeon 8500 / 9100
– ATI FireGL 8700 / 8800 / E1
– ATI FireGL T2
– ATI Radeon 9000
– ATI Radeon 9200
– ATI Radeon 9500
– ATI Radeon 9600
– ATI Radeon 9700
– ATI Radeon 9800
– ATI FireGL Z1 / X1 / X2
– ATI Mobility M9
– ATI Mobility FireGL 9000
– ATI Mobility M9PLUS
– ATI FireGL V3100 / V5100 / V7100

The “xorg.conf” file usually resides in /etc/X11.

Press [Enter] to continue, press ‘q’&[Enter] or [Ctrl]+’c’ to abort.

==============================================================================
Mouse
==============================================================================

Specify the mouse port type. Choose one from the following list:

1. Serial Port
2. PS/2 or USB with PS/2 protocol
3. Inport Bus

Enter the number for your port type: [2]

Specify the mouse model. Choose one from the following list:

1. PS/2 Mouse (X11 generic ps/2 mouse driver)
2. PS/2 Wheel Mouse (X11 generic ps/2 wheel mouse driver)
3. Microsoft Intellimouse (PS2)
4. Microsoft IntelliMouse Explorer (PS2)
5. Kensington ThinkingMouse (PS2)
6. Logitech MouseManPlus (PS2)
7. Alps Glidepoint PS/2 Touchpad
8. Genius NetMouse
9. Genius NetScroll

Enter the number for your mouse model: [2]

If your mouse has only two buttons, it is recommended that you enable
Emulate3Buttons.

Do you want to enable Emulate3Buttons (y/n)? [n]

Now give the full device name that the mouse is connected to, for example
/dev/tty00 or /dev/mouse or /dev/psaux (includes IBM Laptops).

Mouse device: [/dev/input/mice] /dev/mouse

==============================================================================
Keyboard
==============================================================================

Please select one of the following keyboard types that is the better
description of your keyboard. If nothing really matches,
choose 1 (Generic 101-key PC)

1. Generic 101-key PC
2. Generic 102-key (Intl) PC
3. Generic 104-key PC
4. Generic 105-key (Intl) PC
5. Dell 101-key PC
6. Everex STEPnote
7. Keytronic FlexPro
8. Microsoft Natural
9. Northgate OmniKey 101
10. Winbook Model XP5
11. Japanese 106-key
12. PC-98xx Series

Enter a number to choose the keyboard type: [1] 3

Please select the layout corresponding to your keyboard

1. U.S. English
2. U.S. English w/ISO9995-3
3. Belgian
4. Bulgarian
5. Canadian
6. Czechoslovakian
7. German
8. Swiss German
9. Danish
10. Spanish
11. Finnish
12. French
13. Swiss French
14. United Kingdom
15. Hungarian
16. Italian
17. Japanese
18. Norwegian

Press [Enter] for the next page or
enter the number for your keyboard layout country: 1

==============================================================================
FireGL Display Settings
==============================================================================

Quad Buffer Stereo (“Active Stereo”):

This driver does support Quad Buffer Stereo (“Active Stereo”)
in combination with a CRT monitor (refresh rate about 100 to 120 Hz)
and the appropiate stereo viewing subsystem hardware. For example, this can
be a shutter glasses system (infrared or wired) or an active
polarisation device paired with passive stereo polarization glasses.

Do you want to enable “Quad Buffer Stereo” (y/n)? [n]

==============================================================================
TV out Configuration
==============================================================================

Do you want to enable TV out (y/n)? [n]

==============================================================================
FireGL Screen Layout
==============================================================================

——————————————————————————
| Maximum resolution for OpenGL operation |
| |
| – R200 chip family (Radeon 8500-9100 Pro, FireGL 8700/8800/E1): |
| 2048×2048 |
| – R300 chip family (Radeon 9500-9700 Pro, FireGL T2/Z1/X1/X2): |
| 2560×2560 |
——————————————————————————

Choose configuration from the list below

1. Single Head (1 screen, second dark)
2. Laptop Mode (Ability to toggle between internal / external screen)
3. Clone Mode (2 screens – same content)
4. Big Desktop (2 screens – one framebuffer)
5. Dual Head (2 screens – two drivers)

Enter the number for your configuration: [1]

==============================================================================
Single Head selected
==============================================================================

==============================================================================
Monitor Settings
==============================================================================

Now we want to set the specifications of the monitor(s). The two critical
parameters are the vertical refresh rate, which is the rate at which the
the whole screen is refreshed, and most importantly the horizontal sync rate,
which is the rate at which scanlines are displayed.

The valid range for horizontal sync and vertical sync should be documented
in the manual of your monitor. If in doubt, check the monitor database
/usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there.

Press [Enter] to continue, press ‘q’&[Enter] or [Ctrl]+’c’ to abort.

You must indicate the horizontal sync range of your monitor. You can either
select one of the predefined ranges below that correspond to industry-
standard monitor types, or give a specific range.

It is VERY IMPORTANT that you do not specify a monitor type with a horizontal
sync range that is beyond the capabilities of your monitor. If in doubt,
choose a conservative setting.

hsync in kHz; monitor type with characteristic modes
1. 31.5 ; up to 640×480 @ 60 Hz (VGA)
2. 31.5 – 37.9; up to 800×600 @ 60 Hz (SVGA)
3. 31.5 – 48.4; up to 1024×768 @ 60 Hz (XGA)
4. 31.5 – 60.0; up to 1024×768 @ 75 Hz (XGA)
5. 31.5 – 68.7; up to 1024×768 @ 85 Hz (XGA)
6. 31.5 – 80.5; up to 1280×1024 @ 75 Hz (SXGA)
7. 31.5 – 91.1; up to 1280×1024 @ 85 Hz (SXGA)
8. Enter your own horizontal sync range

Enter your choice (1-8): [1] 3

You must indicate the vertical sync range of your monitor. You can either
select one of the predefined ranges below or give a specific range.

EVO TI FREKVENCIJE

1. 20 – 60 (e.g. slow scan flat panels with DVI cable)
2. 50 – 70 (VGA)
3. 60 – 75
4. 60 – 85
5. 60 – 100
6. Specify your own vertical sync range

Enter your choice: [1] 2

==============================================================================
Display Modes
==============================================================================

The default resolution that the server will start-up with will be the first
listed mode that can be supported by the monitor and card.
Currently it is set to:

“640×480” for 24-bit

Modes that cannot be supported due to monitor or clock constraints will
be automatically skipped by the server.

1. Change the modes for 24-bit (24-bit color)
2. The modes are OK, continue.

Enter your choice:
1

Select your modes from the following list:

EVO TI REZOLUCIJE

1 “640×480”
2 “800×600”
3 “1024×768”
4 “1152×864”
5 “1280×960”
6 “1280×1024”
7 “1400×1050”
8 “1600×1200”
9 “1792×1344”

Please list the digits and characters for the modes that you want to use.
For example, ‘632’ selects “1280×1024” “1024×768” “800×600”, with
the default mode of “1280×1024”.

Which modes do you want? 321

The default resolution that the server will start-up with will be the first
listed mode that can be supported by the monitor and card.
Currently it is set to:

“1024×768” “800×600” “640×480” for 24-bit

Modes that cannot be supported due to monitor or clock constraints will
be automatically skipped by the server.

1. Change the modes for 24-bit (24-bit color)
2. The modes are OK, continue.

Enter your choice: 2

You can have a virtual screen (desktop), which is screen area that is larger
than the physical screen and which is panned by moving the mouse to the edge
of the screen. The largest resolution in the modelist is used for any of the
listed resolution with less dimensions. Each color depth can have a
differently-sized virtual screen. Virtual screens resolutions are set
for each color depth separately.

Note: This graphics adapter will always select the maximum
x and y resolution as the default virtual desktop resolution.
This complies with general X11 specifications. see “man XF86Config”.

Do you want to use a virtual desktop where the dimensions are bigger
than your maximum x and y screen resolution? (y/n) [n]

==============================================================================
Direct Rendering Interface Restrictions
==============================================================================

Please specify which restriction sheme you want to implement:

1. no restrictions – any user has access to the OpenGL ICD
2. limited to group ‘users’ – only group members can access the OpenGL ICD
3. limited to group ‘root’ – only group members can access the OpenGL ICD
4. limited to group ‘video’ – only group members can access the OpenGL ICD
5. limited to group ‘dri’ – only group members can access the OpenGL ICD

Enter the number for your default user restrictions: [1]

==============================================================================
Application Profiles
==============================================================================

Please select application specific profile:

1. Default
2. Individual Configuration of Capabilities
3. Maya
4. SOFTIMAGE|XSI
5. SOFTIMAGE|3D
6. Houdini 4.0
7. Houdini 5.0
8. Houdini 5.5

Enter the number for your profile: [1]

==============================================================================
Advanced Graphics Features Settings
==============================================================================

Do you want to initialize xfree86-dga (y/n)? [n]

Do you want to export pseudo color visuals (y/n)? [n]

Do you want to synchronize buffer swaps
with the vertical sync signal (y/n)? [n]

==============================================================================
Full Scene Anti Aliasing (FSAA)
==============================================================================

Please select multi sample visuals you want to share:

1 = All (Visuals for 2,4 and 6 Samples per Pixel)
2 = Visuals for 2 Samples per Pixel
4 = Visuals for 4 Samples per Pixel
6 = Visuals for 6 Samples per Pixel

Please enter: [1]

Do you want to force multi sample visuals
for every OpenGL application? (y/n)? [n]

Disable FSAA Gamma (y/n)? [n]

Customize FSAA Multi Sample Position (y/n)? [n]

==============================================================================
Advanced OS Settings
==============================================================================

External AGPGART module:

It is possible (but not recommended) to turn off the usage of
built-in agp support of the provided fglrx kernel module and
use the external AGP GART module (agpgart.o) of the Linux kernel.
If you want to use the external module then ensure that it loads
prior to the drivers full startup. In order to manually load the
external agpgart module execute this on the commandline (as root):
/sbin/insmod agpgart
or alternatively configure your system to auto load the module.

Do you want to use the external AGP GART module (y/n)? [n]

AGP Locked User Pages

The graphics driver is able to read and write textures and bitmaps trough AGP
mapped and locked views of the main memory for the application’s mem space.
Performing those mapping task depends on several successfull interaction steps
with the Linux kernel. A failure in this process might lead to some messages
in the kernel log. If these kernel functions are failing silently or in case
of other heavy incompatibility (e.g. a new kernel memory manger) then there
is a high chance that the system will hang as soon as the graphics adpater
wants to read from assumed but nor really mapped memory location.

If you do see that the advanced fgl_glxgears application halts your session
whilst the simple glxgears does run nicely then please disable this feature.

If you do see lots of notifications about failed kernel calls for mem locking
then please disable this feature and re-check the kernel message log.

Do you want to enable “AGP Locked User Pages” (y/n)? [y]

TLS Method: *** this only applies to the FireGL workstation boards ***

The graphics driver supports two different methods of thread local storage.
The first method is fast but might immediately abort when used with
WineX, VM emulators or some other advanced programming tools.
The second method is up to 10% slower in a few rendering cases
but does cope nicely with any sort of exotic software.

For more details on this topic, please see the readme.

If not totally sure about your needs, then please select “0 – default”.

0 – default (FireGL workstation boards: fast)
1 – fast operation (only for standard gnu C/C++ OpenGL applications)
2 – compatible operation (for WineX, VM emulators and some profilers)

Which storage method do you want to use? [0]

==============================================================================
Finish
==============================================================================

I am going to write the xorg.conf file now. Make sure you don’t accidently
overwrite a previously configured one.

Shall I write it to ‘/etc/X11/xorg.conf’ (y/n)? y [/code]

[debelizmaj]

ma…znam ja da i instaliram drajver i da izaberem rezoluciju i osvezaavanje.problem je u tome sto kad ja podesim sa xorgconfig sve kako valja on ne radi.Skinuo sam ja posledje drajvere sa ati sajta i pojavi mi se crni monitor koji tri puta trepne a posle cak ni ne trerpce vec je samo crn.
Evo i log fajla
[code]
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/darkstar:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: Linux 2.4.29 i686 [ELF]
Current Operating System: Linux darkstar 2.4.29 #6 Thu Jan 20 16:30:37 PST 2005 i686
Build Date: 23 January 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (–) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Thu Jun 30 20:59:46 2005
(==) Using config file: “/etc/X11/xorg.conf”
(==) ServerLayout “Simple Layout”
(**) |–>Screen “Screen 1” (0)
(**) | |–>Monitor “My Monitor”
(**) | |–>Device “My Video Card”
(**) |–>Input Device “Mouse1”
(**) |–>Input Device “Keyboard1”
(WW) `fonts.dir’ not found (or not valid) in “/usr/X11R6/lib/X11/fonts/local/”.
Entry deleted from font path.
(Run ‘mkfontdir’ on “/usr/X11R6/lib/X11/fonts/local/”).
(WW) `fonts.dir’ not found (or not valid) in “/usr/X11R6/lib/X11/fonts/Speedo/”.
Entry deleted from font path.
(Run ‘mkfontdir’ on “/usr/X11R6/lib/X11/fonts/Speedo/”).
(**) FontPath set to “/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/”
(**) RgbPath set to “/usr/X11R6/lib/X11/rgb”
(==) ModulePath set to “/usr/X11R6/lib/modules”
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: “bitmap”
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: “pcidata”
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(–) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0650 card 1043,8079 rev 01 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0962 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:02:5: chip 1039,5513 card 1043,807a rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1043,8091 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1043,807a rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1043,807a rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7001 card 1043,807a rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 1043,807a rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1043,80a7 rev 91 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip ffff,ffff card ffff,ffff rev ff class ff,ff,ff hdr 00
(II) PCI: 00:10:0: chip 8086,1040 card 8086,1000 rev 00 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5961 card 17ee,2801 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 – 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 – 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 – 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 – 0x0000dfff (0x1000) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdb800000 – 0xdbffffff (0x800000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xdff00000 – 0xfebfffff (0x1ed00000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(–) PCI:*(1:0:0) ATI Technologies Inc Radeon RV280 [Radeon 9200] rev 1, Mem @ 0xe0000000/28, 0xdb800000/16, I/O @ 0xd800/8, BIOS @ 0xdffe0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 – 0xffffffff (0x0) MX
[1] -1 0 0x00000000 – 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 – 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xdc000000 from 0xddffffff to 0xdbffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd8000000 – 0xd83fffff (0x400000) MX
[1] -1 0 0xfffff800 – 0xffffffff (0x800) MXE
[2] -1 0 0xd8800000 – 0xd8800fff (0x1000) MX
[3] -1 0 0xd9000000 – 0xd9000fff (0x1000) MX
[4] -1 0 0xd9800000 – 0xd9800fff (0x1000) MX
[5] -1 0 0xda000000 – 0xda000fff (0x1000) MX
[6] -1 0 0xda800000 – 0xda800fff (0x1000) MX
[7] -1 0 0xdc000000 – 0xdbffffff (0x0) MXO
[8] -1 0 0xdffe0000 – 0xdfffffff (0x20000) MX(B)
[9] -1 0 0xdb800000 – 0xdb80ffff (0x10000) MX(B)
[10] -1 0 0xe0000000 – 0xefffffff (0x10000000) MX(B)
[11] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[12] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[13] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[14] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[15] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[16] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[17] -1 0 0x00008800 – 0x000088ff (0x100) IX
[18] -1 0 0x00009000 – 0x0000907f (0x80) IX
[19] -1 0 0x00009400 – 0x000094ff (0x100) IX
[20] -1 0 0x0000a400 – 0x0000a40f (0x10) IX
[21] -1 0 0x0000d800 – 0x0000d8ff (0x100) IX(B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd8000000 – 0xd83fffff (0x400000) MX
[1] -1 0 0xfffff800 – 0xffffffff (0x800) MXE
[2] -1 0 0xd8800000 – 0xd8800fff (0x1000) MX
[3] -1 0 0xd9000000
– 0xd9000fff (0x1000) MX
[4] -1 0 0xd9800000 – 0xd9800fff (0x1000) MX
[5] -1 0 0xda000000 – 0xda000fff (0x1000) MX
[6] -1 0 0xda800000 – 0xda800fff (0x1000) MX
[7] -1 0 0xdc000000 – 0xdbffffff (0x0) MXO
[8] -1 0 0xdffe0000 – 0xdfffffff (0x20000) MX(B)
[9] -1 0 0xdb800000 – 0xdb80ffff (0x10000) MX(B)
[10] -1 0 0xe0000000 – 0xefffffff (0x10000000) MX(B)
[11] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[12] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[13] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[14] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[15] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[16] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[17] -1 0 0x00008800 – 0x000088ff (0x100) IX
[18] -1 0 0x00009000 – 0x0000907f (0x80) IX
[19] -1 0 0x00009400 – 0x000094ff (0x100) IX
[20] -1 0 0x0000a400 – 0x0000a40f (0x10) IX
[21] -1 0 0x0000d800 – 0x0000d8ff (0x100) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 – 0xffefffff (0x100000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 – 0x000000ff (0x100) IX
(II) All system resource ranges:
[0] -1 0 0xffe00000 – 0xffefffff (0x100000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0xd8000000 – 0xd83fffff (0x400000) MX
[6] -1 0 0xfffff800 – 0xffffffff (0x800) MXE
[7] -1 0 0xd8800000 – 0xd8800fff (0x1000) MX
[8] -1 0 0xd9000000 – 0xd9000fff (0x1000) MX
[9] -1 0 0xd9800000 – 0xd9800fff (0x1000) MX
[10] -1 0 0xda000000 – 0xda000fff (0x1000) MX
[11] -1 0 0xda800000 – 0xda800fff (0x1000) MX
[12] -1 0 0xdc000000 – 0xdbffffff (0x0) MXO
[13] -1 0 0xdffe0000 – 0xdfffffff (0x20000) MX(B)
[14] -1 0 0xdb800000 – 0xdb80ffff (0x10000) MX(B)
[15] -1 0 0xe0000000 – 0xefffffff (0x10000000) MX(B)
[16] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[17] -1 0 0x00000000 – 0x000000ff (0x100) IX
[18] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[19] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[20] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[21] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[22] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[23] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[24] -1 0 0x00008800 – 0x000088ff (0x100) IX
[25] -1 0 0x00009000 – 0x0000907f (0x80) IX
[26] -1 0 0x00009400 – 0x000094ff (0x100) IX
[27] -1 0 0x0000a400 – 0x0000a40f (0x10) IX
[28] -1 0 0x0000d800 – 0x0000d8ff (0x100) IX(B)
(II) LoadModule: “dbe”
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “extmod”
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “type1″
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: “freetype”
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor=”X.Org Foundation & the After X-TT Project”
compiled for 6.8.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: “glx”
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module “GLcore”
(II) LoadModule: “GLcore”
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: “vga”
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 4.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: “mouse”
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: “kbd”
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 01:00:0
(–) Assigning device section with no busID to primary device
(–) Chipset generic found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 – 0xffefffff (0x100000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0xd8000000 – 0xd83fffff (0x400000) MX
[6] -1 0 0xfffff800 – 0xffffffff (0x800) MXE
[7] -1 0 0xd8800000 – 0xd8800fff (0x1000) MX
[8] -1 0 0xd9000000 – 0xd9000fff (0x1000) MX
[9] -1 0 0xd9800000 – 0xd9800fff (0x1000) MX
[10] -1 0 0xda000000 – 0xda000fff (0x1000) MX
[11] -1 0 0xda800000 – 0xda800fff (0x1000) MX
[12] -1 0 0xdc000000 – 0xdbffffff (0x0) MXO
[13] -1 0 0xdffe0000 – 0xdfffffff (0x20000) MX(B)
[14] -1 0 0xdb800000 – 0xdb80ffff (0x10000) MX(B)
[15] -1 0 0xe0000000 – 0xefffffff (0x10000000) MX(B)
[16] -1 0 0x0000ffff
– 0x0000ffff (0x1) IX
[17] -1 0 0x00000000 – 0x000000ff (0x100) IX
[18] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[19] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[20] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[21] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[22] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[23] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[24] -1 0 0x00008800 – 0x000088ff (0x100) IX
[25] -1 0 0x00009000 – 0x0000907f (0x80) IX
[26] -1 0 0x00009400 – 0x000094ff (0x100) IX
[27] -1 0 0x0000a400 – 0x0000a40f (0x10) IX
[28] -1 0 0x0000d800 – 0x0000d8ff (0x100) IX(B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 – 0xffefffff (0x100000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0xd8000000 – 0xd83fffff (0x400000) MX
[6] -1 0 0xfffff800 – 0xffffffff (0x800) MXE
[7] -1 0 0xd8800000 – 0xd8800fff (0x1000) MX
[8] -1 0 0xd9000000 – 0xd9000fff (0x1000) MX
[9] -1 0 0xd9800000 – 0xd9800fff (0x1000) MX
[10] -1 0 0xda000000 – 0xda000fff (0x1000) MX
[11] -1 0 0xda800000 – 0xda800fff (0x1000) MX
[12] -1 0 0xdc000000 – 0xdbffffff (0x0) MXO
[13] -1 0 0xdffe0000 – 0xdfffffff (0x20000) MX(B)
[14] -1 0 0xdb800000 – 0xdb80ffff (0x10000) MX(B)
[15] -1 0 0xe0000000 – 0xefffffff (0x10000000) MX(B)
[16] 0 0 0x000a0000 – 0x000affff (0x10000) MS
[17] 0 0 0x000b0000 – 0x000b7fff (0x8000) MS
[18] 0 0 0x000b8000 – 0x000bffff (0x8000) MS
[19] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[20] -1 0 0x00000000 – 0x000000ff (0x100) IX
[21] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[22] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[23] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[24] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[25] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[26] -1 0 0xfffffffc – 0xffffffff (0x4) IXE
[27] -1 0 0x00008800 – 0x000088ff (0x100) IX
[28] -1 0 0x00009000 – 0x0000907f (0x80) IX
[29] -1 0 0x00009400 – 0x000094ff (0x100) IX
[30] -1 0 0x0000a400 – 0x0000a40f (0x10) IX
[31] -1 0 0x0000d800 – 0x0000d8ff (0x100) IX(B)
[32] 0 0 0x000003b0 – 0x000003bb (0xc) IS
[33] 0 0 0x000003c0 – 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module “int10”
(II) LoadModule: “int10″
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor=”X.Org Foundation”
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) VGA(0): initializing int10.
(II) VGA(0): Primary V_BIOS segment is: 0xc000
(EE) VGA(0): Driver can’t support depth 24
(II) UnloadModule: “vga”
(II) UnloadModule: “int10”
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at “/var/log/Xorg.0.log” for additional information.

[/code]
to mi se pojavi u konzoli kad “padne” x.nije problem u instaliranju drajvera ili neispravnom podesavanju , prvo sam unosio prave vrednosti,posle sam kombinovao ali x nece nikako da radi,pojavljuje se ono gore i jednostavno se vrati u konzolu.
jedino sto mi radi jesu default podesavanja posle instalacije.

[Аутор]

Чланци