- This topic has 6 одговора, 3 гласа, and was last updated 20 years, 10 months раније by
.
-
Чланци
-
$mplayer -tv driver=v4l:width=640:height=480:outfmt=i420 -vc rawi420 -vo xv tv://
MPlayer 1.0pre7-4.0.0 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0Warning unknown option channel at line 4
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding “echo 1024 > /proc/sys/dev/rtc/max-user-freq” to your system startup scripts.
Opening joystick device /dev/input/js0
Can’t open joystick device /dev/input/js0 : No such file or directory
Can’t init input joystick
Setting up LIRC support…
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing tv://.
Cache fill: 0.00% (0 bytes) TV detected! 😉
Selected driver: v4l
name: Video 4 Linux input
author: Alex Beregszaszi
comment: under development
=================================================================WARNING: YOU ARE USING V4L DEMUXER WITH V4L2 DRIVERS!!!
As the V4L1 compatibility layer is broken, this may not work.
If you encounter any problems, use driver=v4l2 instead.
Bugreports on driver=v4l with v4l2 drivers will be ignored.
=================================================================
Selected device: ASUS TV-FM 7135
Capabilites: capture tuner teletext overlay clipping
Device type: 47
Supported sizes: 48×32 => 720×578
Inputs: 3
0: Television: tuner tv (tuner:1, norm:pal)
1: Composite1: (tuner:0, norm:pal)
2: S-Video: (tuner:0, norm:pal)
Using input ‘Television’
vo: X11 running at 1024×768 with depth 24 and 32 bpp (“:0.0” => local display)
==========================================================================
Forced video codec: rawi420
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request – 640 x 480 (preferred csp: Planar I420)
VDec: using Planar I420 as output csp (no 0)
Movie-Aspect is undefined – no prescaling applied.
VO: [xv] 640×480 => 640×480 Planar I420
Selected video codec: [rawi420] vfm:raw (RAW I420)
==========================================================================
Audio: no sound
Starting playback…
MJP: returning! 0% 1% 0.0% 0 0 0%Exiting… (Quit)
$ mplayer -tv driver=v4l2:width=640:height=480:outfmt=i420 -vc rawi420 -vo xv tv://
MPlayer 1.0pre7-4.0.0 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0Warning unknown option channel at line 4
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding “echo 1024 > /proc/sys/dev/rtc/max-user-freq” to your system startup scripts.
Opening joystick device /dev/input/js0
Can’t open joystick device /dev/input/js0 : No such file or directory
Can’t init input joystick
Setting up LIRC support…
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing tv://.
Cache fill: 0.00% (0 bytes) TV detected! 😉
No such driver: v4l2
$
A posle lsmod nalazim drajvere
v4l2_common 5825 1 saa7134
v4l1_compat 13381 1 saa7134
Kartica mi radi sa tvtime, sada kada pokushavam sa mplejerom nailazim na ove probleme na pocetku
Da li je josh neko susreo ovako neshto?
(U xorg.conf mi stoji Load “v4l” a kada sam stavio “v4l2” taj modul nije mogao biti ucitan)meni ne radi tv uopste 🙁 a imam instaliran driver…podesavao sam i tuner i card u modprobe.conf… i sve kao ok ali nema slike nigde ….
Kartica mi radi sa tvtime, sada kada pokushavam sa mplejerom nailazim na ove probleme na pocetku
Da li je josh neko susreo ovako neshto?A jesi li mplayer kompajlirao iz source-a, ili koristiš rpm paket?
a jel imaš v4l drajver ili v4l2?
pa nisam siguran ali cini mi se da nemam gde da ga skinem koristim fedoru core 3 ?
Sređeno
Na Slackware douše, ali sigurno će raditi i na Fedori, treba zaista kompajlirati
Mplayer iz sourcea,nemojmo se zavaravati.
Evo komande za snimanje, nije loš kvalitet slike a i tona:
[code]mencoder tv:// -tv driver=v4l2::freq=607.500 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=900 -oac mp3lame -lameopts cbr:br=64 -o frameno.avi[/code] ovo je za snimanje,naravno 🙂
na kernelima 2.6 već postoje drajveri v4l2 , čak nisam morao da prevodim
jezgro , sve je bilo tu po defaultu.
Мораш бити пријављен да би поставио коментар у овој теми.