Početak›Forumi›Linuks distribucije›Fedora, Red Hat,…›Update i nema startovanja sistema
- This topic has 0 odgovora, 1 glas, and was last updated 13 years, 11 months ranije by gandalf.
-
AutorČlanci
-
20. maj 2010. u 12:27 pm #11906gandalfGlavni majstor
Evo ovako mozda ce nekom pomoci , meni je pomoglo 🙂
Posle jucerasnjeg update sistema , novi kernel i jos gomila nekih sitnica .
nije mi se hteo startovati grafigki deo , tj X, dodje do jexec i tu stane i blinka ekran .
Posto sam pre dve nedelje instalirao nvidijin driver za graficku , u ovoj zameni kernela nesto nije islo kako valja pa sam morao da se snalazim.
Inace kada sam instalirao driver sve je radilo odlicno , nouveau driver sam bacio u blacklistEdit (as root): /boot/grub/grub.conf
To the end of the default kernel (usually the first), edit the kernel line.
Add the following: rdblacklist=nouveau to the end of the kernel line.Kako sam resio :
Posle nekoliko pokusaja sam da napravim, sam dosao do resenja.
http://rpmfusion.org/Howto/nVidiaDetermining your card model
nVidia has several driver series, each of which has different hardware support. To determine which driver you need to install, you’ll first need to find your graphics card model.
If you don’t know it, open a Terminal (Applications > System Tools > Terminal) and type:/sbin/lspci | grep VGA
Fedora version notes
Fedora 12
In order to keep compatibility with nouveau, you either need to recreate the initrd manually after the driver has been installed, or add a command line option to the kernel. To recreate the initrd:
Instalirao sam ponovo driver #yum install kmod-nvidia
i uradio ostatak ovde dole navedensu –
mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r)-nouveau.img
dracut /boot/initramfs-$(uname -r).img $(uname -r)To use the default initrd, but disable the nouveau driver, edit /etc/grub.conf and add the following to the end of the line(s) starting with ‘kernel’:
rdblacklist=nouveau
Before using the driver, you need to lower your system protection so SElinux doesn’t prevent the driver to load.
setsebool -P allow_execstack on
Sada radi sve ok .
-
AutorČlanci
Moraš biti prijavljen da bi postavio komentar u ovoj temi.