- This topic has 20 odgovora, 9 glasova, and was last updated 16 years ranije by
.
-
Članci
-
Nadam se da tu je moguce naci kod prodavaca jer je izsla winfast xp global koja je super ali trenutno ima problema sa v4l
Koliko sam gledao na pcberzi ima raznih modela samo je pitanje koje bi radile.Nebi bilo lose da neko ko je upucen napise topic ili u ovoj poruci koje kartice rade provereno ili se moze namestiti da rade.Evo ovde informacija o tv tjunerima koji rade na Linuxu:
http://linuxtv.org/hg/v4l-dvb?cmd=file;file=linux/Documentation/video4linux/CARDLIST.tuner;filenode=-1;style=rawA ovde dodatnih inforamcija o V4L temi:
http://www.exploits.org/v4l/
http://www.linuxtv.org/v4lwiki/index.php/Main_Page
http://v4l.videotechnology.com/
http://www.thedirks.org/v4l2/Nabavio sam leadtek winfast tv2000 xp rm…. i sada na suse 10.1 nece da radi kada je podesim kao xp karticu a probao sam i da promenim broj kartice kao sto pise na nekom forumu u modprobe.conf i modprobe.conf.local i opet nece da radi na kdetv programu.
Evo izlaz dmesg-alinux:/home/user # dmesg|grep bt
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 209, latency: 32, mmio: 0xd0000000
bttv0: detected: Leadtek TV 2000 XP [card=34], PCI subsystem ID is 107d:6609
bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=003ff162 [init]
i2c-algo-bit.o: bt878 #0 [sw] passed test.
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80… not found
bttv0: i2c: checking for TDA9875 @ 0xb0… not found
bttv0: i2c: checking for TDA7432 @ 0x8a… not found
bttv0: i2c: checking for TDA9887 @ 0x86… not found
tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
input: bttv IR (card=34) as /class/input/input2
bttv-input: bttv IR (card=34) detected at pci-0000:01:07.0/ir0
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878_probe: card id=[0x6609107d], Unknown card.
bt878: probe of 0000:01:07.1 failed with error -22
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
linux:/home/user #uname -r
2.6.16.13-4-defaultlinux:/home/user #lspci -v
01:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: LeadTek Research Inc. Unknown device 6609
Flags: bus master, medium devsel, latency 32, IRQ 209
Memory at d0000000 (32-bit, prefetchable)
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 201:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: LeadTek Research Inc. Unknown device 6609
Flags: medium devsel, IRQ 209
Memory at d0001000 (32-bit, prefetchable)
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2U fajlu /usr/src/linux-2.6.16.13-4/drivers/media/video/bttv-cards.c je
{ 0x6609107d, BTTV_BOARD_WINFAST2000, “Leadtek TV 2000 XP” },
…..
…..
[BTTV_BOARD_WINFAST2000] = {
.name = “Leadtek WinFast 2000/ WinFast 2000 XP”,
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
#if 0
.gpiomask = 0xc33000,
.audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
#else
/* Alexander Varakin [stereo version] */
.gpiomask = 0xb33000,
.audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
#endif
/* Audio Routing for “WinFast 2000 XP” (no tv stereo !)
gpio23 — hef4052:nEnable (0x800000)
gpio12 — hef4052:A1
gpio13 — hef4052:A0
0x0000: external audio
0x1000: FM
0x2000: TV
0x3000: n.c.
Note: There exists another variant “Winfast 2000” with tv stereo !?
Note: eeprom only contains FF and pci subsystem id 107d:6606
*/
.needs_tvaudio = 0,
.pll = PLL_28,
.has_radio = 1,
.tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = winfast2000_audio,
.has_remote = 1,
},Dali je neko namestio da mu radi ili radi na nekom kernelu ili distrou?
Jel ima neko USB TV Tuner,mozda ih Linuz bolje prepozna nego ove koje idu unutra.
Mislim da je bolje da se kupi jedan takav,mislim da je manje maltretiranja a i bolja je slika!
Kod mene moze svasta da bude u pitanju a posto sam otklonio nedostatak lirc_gpio modula sada mislim da bi morao da editujem bttv-cards.c i kompilujem kernel surs
Ovo zato sto ova kartica nema FM kako je opisano u gore fajlu ciji deo sam pastovao u gornjoj poruci.Lepo sam hteo da uzmem pixelwiev pctv ali ova je izgledala lepse 🙁
Forum ‘Hardver’ je zaključan za nove teme i odgovore.