- This topic has 36 одговора, 8 гласова, and was last updated 14 years, 7 months раније by
.
-
Чланци
-
http://www.slax.org/modules.php?action=detail&id=1037
http://www.slax.org/modules.php?action=detail&id=366
ovde je gotov slmodem drajver za dva slaksa :- s tim da je 6.1.2 na kernelu 2.6.27.27
mislim da nema src u modulu jer je nedostupan linmodemsovde je postupak , da nije ungrabwinmodem u pitanju?
http://modemhelplinux.741.com/slmodemd-slaxbuild.htmlmirror
http://www.mirrorservice.org/sites/www.ibiblio.org/gentoo/distfiles/slmodem-2.9.11-20090222.tar.gzovde je stariji ungranb
http://ftp.pardus.org.tr/pub/source/2009/ungrab-winmodem-20080126.tar.gziskljucio sam i ponovo pokrenuo snd-intel8x0m, i ponovo pokrenuo scanModem i sad mi je izbacio
[code]Analysing card in PCI bus 00:1f.6, writing to scanout.00:1f.6
Modem with PCI ID 8086:24c6 is in the software modem category.
Checking for match with Archived softmodem information.
IDENT=slmodemd
Using scanout.00:1f.6 data, and writing guidance to ModemData.txt
Writing Intel.txt
Writing Smartlink.txtWriting residual guidance customized to your System.
A subfolder Modem/ has been written, containing these files with more detailed Information:
——————————————————————————————
1stRead.txt Bootup.txt DriverCompiling.txt InfoGeneral.txt
Intel.txt ModemData.txt Rational.txt Smartlink.txt
SoftModem.txt Testing.txt UNSUBSCRIBE.txt YourSystem.txt
dmesg.txt scanout.00:1f.6 wvdial.txt
——————————————————————————————-
Please read 1stRead.txt first for Guidance.[/code]kakva je to zajebancija, i Intel i SmartLink?
Skinuo sam ovaj slmodemd, pa cu probati sa njim.
a sta je sa ovim ungrab, cemu to sluzi?Uspeo sam instalirati slmodem-2.9.11-20090222.tar.gz >:D , probam se konektovati preko KPPP i zakuca na initializing modem, probao sam query modem i dobijem sliku
kad sam rasetovao masinu nista nece da radi, mislim na ovo sa modemom, morao sam odraditi
[code]# mknod -m 600 /dev/slamr0 c 242 0
# /usr/sbin/slmodemd –country=USA /dev/slamr0[/code]
postoji li nacin da se doda negde komanda da se ovo pokrece prilikom boot-a?občno može u /etc/rc.d/rc.local da se dopiše ,bilo šta 😀
(mada u distoima praktikuju poseban servis da dodaju)zakuca se modem ili ceo komp ? ili samo pukne pppd ?
dobro, to se onda da resiti!
kad u KPPP idem na connect, ide modem ready, dailing 042…, initializing modem i tu stane, mogu da ga prekinem u bilo kom trenutku, a komp radi normalno.
query modem radi cini mi se normalnoNapravio sam sranje, upisao sam u /etc/rc.d/rc.local
[code]mknod -m 600 /dev/slamr0 c 242 0
/usr/sbin/slmodemd –country=USA /dev/slamr0[/code]sad pri boot-u izbacuje
[code]SmartLink Soft Modem: version 2.9.11 Dec 14 2009 00:47:22
symbolic link `/dev/ttySL0′ -> `/dev/pts/2′ created.
modem `slamr0′ created. TTY is `/dev/pts/2′
Use `/dev/ttySL0′ as modem device, Ctrl+C for termination.[/code]
i tu stane.koji je postupak da sa livecd-a podignem sistem i editujem ovaj rc.local file i izbrisem
[code]/usr/sbin/slmodemd –country=USA /dev/slamr0[/code] ?mislim da ce to resiti problem, bar da podigne sistem?!
Uspeo sam srediti ovo sto sam zabrljavio, ali jos uvek ostaje problem, postoji li nacin da se ovaj salmr0 automatski pravi pri boot-u, pokusavao sam naci neko resnje na netu ali nema ili ja trazim na pogresnom mestu?
probaj ovako ,napravi skriptu
(da se nekako kratko zove recimo initsl )
[code]
#!/bin/shmknod -m 600 /dev/slamr0 c 242 0
/usr/sbin/slmodemd –country=USA /dev/slamr0
[/code]promeni joj executable flag ,stavi je u /usr/local/bin/
pa je pokreći kao root :- za sada dok ne smislimo gde da se ubaci
[code]
initsl
[/code]
(verovatno piše negde po mailing listama ali se nije otvaralo juče)
u principu može i kao kde autostart ima par mesta gde bi išloZasto se ovo desava
[code]root@dokman:/home/dokman# wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf’.Scanning your serial ports for a modem.
Modem Port Scan: S0 S1 S2 S3
WvModem: Cannot get information for serial port.
ttySL0: ATQ0 V1 E1 — OK
ttySL0: ATQ0 V1 E1 Z — OK
ttySL0: ATQ0 V1 E1 S0=0 — OK
ttySL0: ATQ0 V1 E1 S0=0 &C1 — OK
ttySL0: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttySL0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttySL0: Modem Identifier: ATI — SmartLink Soft Modem
ttySL0: Speed 4800: AT — OK
ttySL0: Speed 9600: AT — OK
ttySL0: Speed 19200: AT — OK
ttySL0: Speed 38400: AT — OK
ttySL0: Speed 57600: AT — OK
ttySL0: Speed 115200: AT — OK
ttySL0: Speed 230400: AT — OK
ttySL0: Speed 460800: AT — OK
ttySL0: Max speed is 460800; that should be safe.
ttySL0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OKFound a modem on /dev/ttySL0.
Modem configuration written to /etc/wvdial.conf.
ttySL0: Speed 460800; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0”
root@dokman:/home/dokman#[/code]mislio sam da je bog onoga sto u toku boot-a iskljuci slamr pa ga ponovo ukljuci, pa sledeci put odradim
[code]root@dokman:/home/dokman# rmmod slamr
root@dokman:/home/dokman# modprobe slamr
root@dokman:/home/dokman# mknod -m 600 /dev/slamr0 c 242 0
root@dokman:/home/dokman# /usr/sbin/slmodemd -c BULGARIA /dev/slamr0
SmartLink Soft Modem: version 2.9.11 Dec 14 2009 00:47:22
symbolic link `/dev/ttySL0′ -> `/dev/pts/2′ created.
modem `slamr0′ created. TTY is `/dev/pts/2′
Use `/dev/ttySL0′ as modem device, Ctrl+C for termination.[/code]
ali svejedno, nista se ne menja.A wvdial kad pokrenem
[code]root@dokman:/home/dokman# wvdial
–> WvDial: Internet dialer version 1.60
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
–> Modem initialized.
–> Sending: ATDT042110011
–> Waiting for carrier.
ATDT042110011
NO CARRIER
–> No Carrier! Trying again.
–> Sending: ATDT042110011
–> Waiting for carrier.
ATDT042110011
–> Timed out while dialing. Trying again.
^CCaught signal 2: Attempting to exit gracefully…
–> Disconnecting at Thu Dec 17 11:49:01 2009
root@dokman:/home/dokman#[/code]i ovaj Waiting for carrier. se ponavlja u nedogled.
Мораш бити пријављен да би поставио коментар у овој теми.