[rešeno] Problem sa FTP serverom u activ modu

[miodragz]

    Imam problem sa FTP serverom u activ modu desi se da nema pristupa njemu sa kljentske strane

Evo i conf fajla

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd’s
# capabilities.
#
# Allow anonymous FTP? (Beware – allowed by default if you comment this out).
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd’s)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages – messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using “root” for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command “SIZE /big/file” in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the “-R” option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as “ncftp” and “mirror” assume
# the presence of the “-R” option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When “listen” directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd whith two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES

pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES

[LYb]

“Desi se”? Nekada ima, nekada nema? 🙂

Nego, jesi li ti forvardovao portove do servera (20 i 21 TCP)?

[miodragz]

  Zahvalio bi se Lyb-u na odgovoru a oni koje se hvale da su administrtori nemoj vise da pomazu toliko ne znamo sta cemo od tolike pomoci

Lyb  O0

[miodragz]

  Dzudno da nema strcnjaka

[dukenukem_4d]

sta se koristi sa klijentske strane?
(neki ftp klijenti treba posebno da se podesavaju u zavisnosti da li je active ili pasive ftp)

[psy_unix]

Aj ovako miodragz . Nisam ni ja bas toliki strucnjak za FTP ali :

1. Postovanje jednog conf fajla za podesavanje FTP servera je malo , moras priznati .
2. Za pocetak nam postuj ovako nesto /var/log/vsftpd.log
3. Ja to radim preko webmina jer je mnogo lakse iako nije unix nacin (vidi sliku)

Pazi kao sto znas i sam svaki server zavisi od milion stvari i podesavanja pa ako nije problem budi bar malo detanjniji , molim te .

Ono tipa : Koji sistem , kako si instalirao ftp , koja verzija , logovi , conf-ovi , koji klinet kao sto kaze  dukenukem4d i videces da ces dobiti bolji odgovor . 

a oni koje se hvale da su administrtori nemoj vise da pomazu toliko ne znamo sta cemo od tolike pomoci

E tek onda cemo da raspalimo po ovima , hehehehhee

[LYb]

Auuuu, pa tebi webmin radi na default portu… :)))

Nego, koliko mi se cini, prica sa tim ftp serverom je zavrsena… I 99.99% je bio NAT u pitanju 🙂

Mislim, sve je to lepo, klijent posalje paket, ovaj stigne do wan adrese na ruteru, a ovaj kaze “E, bas ti fala, ali ja zaista ne znam sta bih s tim”, a server, jadan tuzan i usamljen iza, pita se sto ga niko ne voli :))

[miodragz]

  Pa da Lyb  O0

[psy_unix]

@LYb

Auuuu, pa tebi webmin radi na default portu…

Znam ali ovo mi je kucni racunar kome se moze pristupiti samo iz LAN-a .
A inace znam mnoge firme i hosting kuce koje odobrvaju pristup webmin-u na javnoj IP sa strane .
Znam treba biti paranoik ali ako se lepo odrade dozvole kao i dozvole pristupa onda je webmin najmocnije i najbezbednije oruzije u rukama admina . Po meni  naravno.

Ok. da oznacim reseno ?

[GoranSTX]

Mislim, sve je to lepo, klijent posalje paket, ovaj stigne do wan adrese na ruteru, a ovaj kaze “E, bas ti fala, ali ja zaista ne znam sta bih s tim”, a server, jadan tuzan i usamljen iza, pita se sto ga niko ne voli :))

Covece… umalo se nisam rasplakao zbog usamljenog servera koga niko ne voli…

@psy_unix
rekao bih da je stvar resena

[Аутор]

Чланци