- This topic has 8 одговора, 3 гласа, and was last updated 20 years, 8 months раније by
.
-
Чланци
-
Imam “Conexant HSF” modem, koji je na Slackware-u uz drajver “hsflinmodem-5.03.27lnxtbeta03042700” odnosno “hsflinmodem-6.03.00lnxt04082400full” (uz patch) radio odlicno. Sada sam medjutim pokusao da ih instaliram (bilo koji od ta dva) na SuSE distribuciju, i kako nijedan nije hteo da se instalira preuzeo sam “hsflinmodem-7.18.00.06full” sa adrese koju je ostavio Tigerheart u nekoj poruci na koju sam naisao kada sam pretrazivao ovaj forum.
Kako ni on odmah nije hteo da se instalira (kada mu se ukaze na /lib/modules/2.6.13-15-default/build odnosno /usr/src/linux-2.6.13-15-obj/i386/default/ u toku instalacije) instalirao sam izvorni kod jezgra, kopirao /boot/config-2.6.13-15-default u njegov direktorijum kao .config i kompajlirao jezgro i module (ni jezgro ni module nisam instalirao, jer su bili isti kao i vec instalirani). Putanju gde se nalazi izvorni kod jezgra (/usr/src/linux-2.6.13-15) sam predao u toku instaliranja drajvera, nakon cega se drajver uspesno instalirao.
Stvar je medjutim u tome sto sada kada modem (navodno) radi, kada se uspostavi veza ona traje najvise par minuta nakon cega se prekida, dok u Windows-u radi odlicno.
U datoteci /var/log/messages ono koje se tice konekcije, stoji:
[code]
Dec 19 02:57:47 linux pppd[5601]: Plugin passwordfd.so loaded.
Dec 19 02:57:47 linux pppd[5601]: pppd 2.4.3 started by axa, uid 1000
Dec 19 02:57:47 linux pppd[5601]: Using interface ppp0
Dec 19 02:57:47 linux pppd[5601]: Connect: ppp0 <--> /dev/ttySHSF0
Dec 19 02:57:50 linux pppd[5601]: PAP authentication succeeded
Dec 19 02:57:50 linux kernel: PPP BSD Compression module registered
Dec 19 02:57:50 linux kernel: PPP Deflate Compression module registered
Dec 19 02:57:51 linux pppd[5601]: local IP address 212.62.34.129
Dec 19 02:57:51 linux pppd[5601]: remote IP address 212.62.44.3
Dec 19 02:57:51 linux pppd[5601]: primary DNS address 212.62.44.7
Dec 19 02:57:52 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
Dec 19 02:57:53 linux ifup: No configuration found for ppp0
Dec 19 02:57:54 linux pppd[5601]: Script /etc/ppp/ip-up finished (pid 5645), status = 0x0
Dec 19 02:57:59 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
Dec 19 02:58:20 linux pppd[5601]: Hangup (SIGHUP)
Dec 19 02:58:20 linux pppd[5601]: Modem hangup
Dec 19 02:58:20 linux pppd[5601]: Connect time 0.5 minutes.
Dec 19 02:58:20 linux pppd[5601]: Sent 729 bytes, received 446 bytes.
Dec 19 02:58:20 linux pppd[5601]: Connection terminated.
Dec 19 02:58:20 linux ifdown: No configuration found for ppp0
Dec 19 02:58:20 linux ifdown: Nevertheless the interface will be shut down.
Dec 19 02:58:20 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.pppd.ppp0 to /etc/resolv.conf
Dec 19 02:58:20 linux pppd[5601]: Script /etc/ppp/ip-down finished (pid 5745), status = 0x0
Dec 19 02:58:20 linux pppd[5601]: Exit.
Dec 19 03:00:28 linux pppd[5882]: Plugin passwordfd.so loaded.
Dec 19 03:00:28 linux pppd[5882]: pppd 2.4.3 started by axa, uid 1000
Dec 19 03:00:28 linux pppd[5882]: Using interface ppp0
Dec 19 03:00:28 linux pppd[5882]: Connect: ppp0 <--> /dev/ttySHSF0
Dec 19 03:00:31 linux pppd[5882]: PAP authentication succeeded
Dec 19 03:00:32 linux pppd[5882]: local IP address 212.62.34.129
Dec 19 03:00:32 linux pppd[5882]: remote IP address 212.62.44.3
Dec 19 03:00:32 linux pppd[5882]: primary DNS address 212.62.44.7
Dec 19 03:00:32 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
Dec 19 03:00:32 linux pppd[5882]: Script /etc/ppp/ip-up finished (pid 5904), status = 0x0
Dec 19 03:00:34 linux ifup: No configuration found for ppp0
Dec 19 03:00:38 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
Dec 19 03:01:52 linux pppd[5882]: Hangup (SIGHUP)
Dec 19 03:01:52 linux pppd[5882]: Modem hangup
Dec 19 03:01:52 linux pppd[5882]: Connect time 1.4 minutes.
Dec 19 03:01:52 linux pppd[5882]: Sent 952 bytes, received 2194 bytes.
Dec 19 03:01:52 linux pppd[5882]: Connection terminated.
Dec 19 03:01:53 linux ifdown: No configuration found for ppp0
Dec 19 03:01:53 linux ifdown: Nevertheless the interface will be shut down.
Dec 19 03:01:53 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.pppd.ppp0 to /etc/resolv.conf
Dec 19 03:01:53 linux pppd[5882]: Script /etc/ppp/ip-down finished (pid 6002), status = 0x0
Dec 19 03:01:53 linux pppd[5882]: Exit.
Dec 19 03:02:30 linux pppd[6117]: Plugin passwordfd.so loaded.
Dec 19 03:02:30 linux pppd[6117]: pppd 2.4.3 started by axa, uid 1000
Dec 19 03:02:30 linux pppd[6117]: Using interface ppp0
Dec 19 03:02:30 linux pppd[6117]: Connect: ppp0 <--> /dev/ttySHSF0
Dec 19 03:02:33 linux pppd[6117]: PAP authentication succeeded
Dec 19 03:02:34 linux pppd[6117]: local IP address 212.62.34.129
Dec 19 03:02:34 linux pppd[6117]: remote IP address 212.62.44.3
Dec 19 03:02:34 linux pppd[6117]: primary DNS address 212.62.44.7
Dec 19 03:02:34 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
Dec 19 03:02:34 linux pppd[6117]: Script /etc/ppp/ip-up finished (pid 6139), status = 0x0
Dec 19 03:02:35 linux ifup: No configuration found for ppp0
Dec 19 03:02:39 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
Dec 19 03:03:14 linux su: (to root) axa on /dev/pts/2
Dec 19 03:04:01 linux pppd[6117]: Hangup (SIGHUP)
Dec 19 03:04:01 linux pppd[6117]: Modem hangup
Dec 19 03:04:01 linux pppd[6117]: Connect time 1.5 minutes.
Dec 19 03:04:01 linux pppd[6117]: Sent 0 bytes, received 0 bytes.
Dec 19 03:04:01 linux pppd[6117]: Connection terminated.
Dec 19 03:04:02 linux ifdown: No configuration found for ppp0
Dec 19 03:04:02 linux ifdown: Nevertheless the interface will be shut down.
Dec 19 03:04:02 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.pppd.ppp0 to /etc/resolv.conf
Dec 19 03:04:02 linux pppd[6117]: Script /etc/ppp/ip-down finished (pid 6263), status = 0x0
Dec 19 03:04:02 linux pppd[6117]: Exit.
[/code]
… itd. skoro sasvim isto za svako novo uspostavljanje veze.Izlaz komande “lspci -vv” za modem je:
[code]
00:0f.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
Subsystem: Conexant Dynalink 56PMi
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- Sekvenca za inicijalizaciju 1: AT&FW3+MS=V90,1,28800,33600,28800,56000
Probaj ovo upisati tamo u komandama modema. Ako se kačiš preko 042 smin mreže, ona ne podržava V92 protokol, pa ga moraš promeniti. To mi pada na pamet 🙄 da je kod tebe. Promeni string pa vidi kako će da radi.Ja sam na suse 10 rc1 instalirao ovaj modem sa poslednjim drajverima sa linuxant sajta koje sam patchovao
Ovaj a ni stariji drajvet nije hteo da se kompiluje jer je falio jedan modul za serial portove (nesecamse koji bese) Zato sam otisao u /usr/src/linux i uradio make menuconfig make make modules install make install (odnosno sam rekompajliro kernel i instaliro isti)
Ovaj kernel se sam ubacio u grub
Prosli put sam samo uradio make menu config (ja mislim ) od sursa i uspeo da kompilujem drajver (mozda i make modules install)
Kada komilujes drajver imas log (pise ti gde) tako mozes da vidis dali ti fali taj cinimise cnt ili neki slican fajl za serijal portoveIskljuci ovaj time protokol i ukljuci samo stupid mode a za konektovanje koristi kinternet
Dec 19 02:57:59 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
kod mene radi ovako
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: –> WvDial: Internet dialer version 1.54.0
pppd[0]: –> Initializing modem.
pppd[0]: –> Sending: AT &FW3+MS=V92,1,28800,33600,28800,56000
pppd[0]: AT &FW3+MS=V92,1,28800,33600,28800,56000
pppd[0]: OK
pppd[0]: –> Sending: ATX3
pppd[0]: ATX3
pppd[0]: OK
pppd[0]: –> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: –> Sending: ATX3
pppd[0]: ATX3
pppd[0]: OK
pppd[0]: –> Modem initialized.
pppd[0]: –> Sending: ATDP633000
pppd[0]: –> Waiting for carrier.
pppd[0]: ATDP633000
pppd[0]: CONNECT 49333 V42B
pppd[0]: –> Carrier detected. Chatmode finished.
pppd[0]: Serial connection established.
pppd[0]: Renamed interface ppp0 to modem0
pppd[0]: Using interface modem0
Status is: connecting
pppd[0]: Connect: modem0 /dev/modem
pppd[0]: PAP authentication succeeded
pppd[0]: local IP address 212.200.134.xxx
pppd[0]: remote IP address 194.106.191.25
pppd[0]: primary DNS address 194.106.188.2
pppd[0]: secondary DNS address 194.106.188.17
pppd[0]: Script /etc/ppp/ip-up finished (pid 12667), status = 0x0
Status is: connectedObicno na kraju komande hsfconfig skript pravi sam /dev/modem link na /dev/ttySHSF0
Ako nece da radi link probal da napravis rucno
rm -f /dev/modem
ln -sv /dev/ttySHSF0 /dev/modemU yastu kao modem upisi /dev/modem i ukljuci stupid mode pa zatim koristi kinternet dajler.Ako je modul uredu onda mora da radi
Probao sam ovo sto si mi napisao oko podesvanja modema u Yastu, zahvalan sam ti na tome, mada mi to nije pomoglo.
Dakle u Yast-u, pa u network ili slicno, pa onda u modem. Tu sam napravio “novi modem” i ubacio /dev/modem, decekirao “Wait for dial tone”, onda dalje, cekirao “Stupid Mode” (cekirane su bile i opcije “Modify DNS When Connected”, “Automatically retreive DNS” i “External Firewall Interface”, dok je “Dial on Demand” bio decekiran). Pa onda ubacio podatke o provajderu…
Kada sam zavrsio i startovao Kinternet po prvi put otkad sam u SuSE- bio sam na vezi duze od 3 min. Medjutim slucajno sam opet klikuno na ikonicu Kinternet-a (nisam znao da se tako i prekida veza) i od tada je opet po starom. Probao sam da brisem napravljene konekcije pa da ih ponovo pravim, ali nista. Tekst koji se tice konektovanja u /var/log/messages je ovakav:
[code]
Dec 21 04:04:41 linux pppd[5859]: Plugin passwordfd.so loaded.
Dec 21 04:04:41 linux pppd[5859]: pppd 2.4.3 started by root, uid 0
Dec 21 04:04:42 linux wvdial[5860]: WvDial: Internet dialer version 1.54.0
Dec 21 04:04:42 linux wvdial[5860]: Initializing modem.
Dec 21 04:04:42 linux wvdial[5860]: Sending: AT&FW3+MS=V90,1,28800,33600,28800,56000
Dec 21 04:04:42 linux wvdial[5860]: AT&FW3+MS=V90,1,28800,33600,28800,56000
Dec 21 04:04:42 linux wvdial[5860]: OK
Dec 21 04:04:42 linux wvdial[5860]: Sending: ATX3
Dec 21 04:04:42 linux wvdial[5860]: ATX3
Dec 21 04:04:42 linux wvdial[5860]: OK
Dec 21 04:04:42 linux wvdial[5860]: Sending: ATM1
Dec 21 04:04:42 linux wvdial[5860]: ATM1
Dec 21 04:04:42 linux wvdial[5860]: OK
Dec 21 04:04:42 linux wvdial[5860]: Modem initialized.
Dec 21 04:04:42 linux wvdial[5860]: Sending: ATDT042110120
Dec 21 04:04:42 linux wvdial[5860]: Waiting for carrier.
Dec 21 04:04:43 linux wvdial[5860]: ATDT042110120
Dec 21 04:05:14 linux wvdial[5860]: CONNECT 46667 V42B
Dec 21 04:05:14 linux wvdial[5860]: Carrier detected. Chatmode finished.
Dec 21 04:05:14 linux pppd[5859]: Serial connection established.
Dec 21 04:05:14 linux pppd[5859]: Renamed interface ppp0 to modem0
Dec 21 04:05:14 linux pppd[5859]: Using interface modem0
Dec 21 04:05:14 linux pppd[5859]: Connect: modem0 /dev/modem
Dec 21 04:05:21 linux pppd[5859]: Hangup (SIGHUP)
Dec 21 04:05:21 linux pppd[5859]: Modem hangup
Dec 21 04:05:21 linux pppd[5859]: Connection terminated.
Dec 21 04:05:22 linux pppd[5859]: Exit.
Dec 21 04:05:22 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Dec 21 04:05:22 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 …
Dec 21 04:05:22 linux SuSEfirewall2: Warning: no interface active
Dec 21 04:05:22 linux SuSEfirewall2: batch committing…
Dec 21 04:05:22 linux SuSEfirewall2: Firewall rules successfully set
[/code]
tj. kada uspe da se konektuje na nekoliko sekundi:
[code]
Dec 21 04:25:05 linux pppd[6586]: Plugin passwordfd.so loaded.
Dec 21 04:25:05 linux kernel: CSLIP: code copyright 1989 Regents of the University of California
Dec 21 04:25:05 linux kernel: PPP generic driver version 2.4.2
Dec 21 04:25:05 linux pppd[6586]: pppd 2.4.3 started by root, uid 0
Dec 21 04:25:07 linux wvdial[6687]: WvDial: Internet dialer version 1.54.0
Dec 21 04:25:07 linux wvdial[6687]: Initializing modem.
Dec 21 04:25:07 linux wvdial[6687]: Sending: AT&FW3+MS=V90,1,28800,33600,28800,56000
Dec 21 04:25:08 linux wvdial[6687]: AT&FW3+MS=V90,1,28800,33600,28800,56000
Dec 21 04:25:08 linux wvdial[6687]: OK
Dec 21 04:25:08 linux wvdial[6687]: Sending: ATX3
Dec 21 04:25:08 linux wvdial[6687]: ATX3
Dec 21 04:25:08 linux wvdial[6687]: OK
Dec 21 04:25:08 linux wvdial[6687]: Sending: ATM1
Dec 21 04:25:08 linux wvdial[6687]: ATM1
Dec 21 04:25:08 linux wvdial[6687]: OK
Dec 21 04:25:08 linux wvdial[6687]: Sending: ATX3
Dec 21 04:25:08 linux wvdial[6687]: ATX3
Dec 21 04:25:08 linux wvdial[6687]: OK
Dec 21 04:25:08 linux wvdial[6687]: Modem initialized.
Dec 21 04:25:08 linux wvdial[6687]: Sending: ATDT042110120
Dec 21 04:25:08 linux wvdial[6687]: Waiting for carrier.
Dec 21 04:25:08 linux wvdial[6687]: ATDT042110120
Dec 21 04:25:42 linux wvdial[6687]: CONNECT 46667 V42B
Dec 21 04:25:42 linux wvdial[6687]: Carrier detected. Chatmode finished.
Dec 21 04:25:42 linux pppd[6586]: Serial connection established.
Dec 21 04:25:42 linux pppd[6586]: Renamed interface ppp0 to modem0
Dec 21 04:25:42 linux pppd[6586]: Using interface modem0
Dec 21 04:25:42 linux pppd[6586]: Connect: modem0 /dev/modem
Dec 21 04:25:46 linux pppd[6586]: PAP authentication succeeded
Dec 21 04:25:46 linux kernel: PPP BSD Compression module registered
Dec 21 04:25:46 linux kernel: PPP Deflate Compression module registered
Dec 21 04:25:46 linux pppd[6586]: local IP address 212.62.34.177
Dec 21 04:25:46 linux pppd[6586]: remote IP address 212.62.44.3
Dec 21 04:25:46 linux pppd[6586]: primary DNS address 212.62.44.7
Dec 21 04:25:47 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
Dec 21 04:25:50 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Dec 21 04:25:50 linux ip-up: SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Dec 21 04:25:50 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 …
Dec 21 04:25:51 linux SuSEfirewall2: batch committing…
Dec 21 04:25:52 linux SuSEfirewall2: Firewall rules successfully set
Dec 21 04:25:52 linux pppd[6586]: Script /etc/ppp/ip-up finished (pid 8318), status = 0x0
Dec 21 04:25:57 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
Dec 21 04:25:58 linux ip-up: postqueue: fatal: Cannot flush mail queue – mail system is down
Dec 21 04:26:27 linux pppd[6586]: Hangup (SIGHUP)
Dec 21 04:26:27 linux pppd[6586]: Modem hangup
Dec 21 04:26:27 linux pppd[6586]: Connect time 0.7 minutes.
Dec 21 04:26:27 linux pppd[6586]: Sent 37948 bytes, received 105816 bytes.
Dec 21 04:26:27 linux pppd[6586]: Connection terminated.
Dec 21 04:26:28 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.pppd.modem0 to /etc/resolv.conf
Dec 21 04:26:28 linux pppd[6586]: Terminating on signal 15
Dec 21 04:26:28 linux pppd[6586]: Exit.
Dec 21 04:26:30 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Dec 21 04:26:30 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 …
Dec 21 04:26:30 linux SuSEfirewall2: Warning: no interface active
Dec 21 04:26:31 linux SuSEfirewall2: batch committing…
Dec 21 04:26:31 linux SuSEfirewall2: Firewall rules successfully set
[/code]
Moram da napomenem da sam ranije (pre ovog pokusaja sa Yast-om) bio poiskljucio neke servise u nadi da cu onemoguciti tu famoznu skriptu koja mi prekida vezu. To su ugalvnom bili servisi za Sambu, nfs, postfix… mozda jos neki “manje poznat”, ali mislim da to nije razlog zbog cega ni Kinternet ne radi, nesto bi o tome pisalo u /var/log/messages a i probao sam pre ovoga da zovem preko wvdial-a (sa ukljucenom “Stupid MOde” opcijom).A taman kada samo se ponadao da necu morati da razmisljam da se vratim na Slackware-u 🙁
Kad si prvi put pokrenuo hsfconfig komandu verujem da nisi mogao da kompilujes modul iz build direktorijuma.
To je ono sto se meni desilo na suse 10 rc1 i mandriva 2006 rc1.
Falio je jedan .h ili .o fajl za serijal portove koji u nazivu mislim da ima cnt ili nesto slicno (vidi se u log fajlu posle neuspele kompilacije)
Na prosloj instalaciji suse10 (kad sam instaliro prvi put ) nisam instalirao kernel iz sursa vec mislim da sam samo instaliro module a predhodno uradio make menuconfig sursa ili sam uradio make menuconfig sursa i koristio /usr/src/linux kao build direktorijum (nesecamse al je naso fajl)
Kad mi je dosadio taj suse stavio sam mandrivu pa opet suse
Na ponovnoj instalaciji sam uradio make menuconfig,make,make modules install,make install
Ovo znaci da sam instalirao novi kernel iz surs direktorijuma i on je imao taj fajl u build direktorijumu
Ovo sam uradio odmah po instalaciji distroa pa zato nisam morao da reinstaliram sve drajvere (graficka i td).Hteo sam da izbacim neke dvb module i td……Iskljuci taj ntp i mail pa ako opet puca probaj da pozoves neki drugi provajder.Recimo ovaj 041555555 user 555 pass 555 (na ovaj se loguje u svakom slucaju) ili sezampro novi ili neke druge
Ako puca onda ti modul nije dobar
1.Probaj da uradis make menuconfig …….make modules install pa pokreni opet hsfconfig i koristi normalni build direktorijum koji ti predlaze drajver
2.Probaj da instaliras distro opet pa odmah rekompajliraj kernel.Posle boot-a tog kernela idi u yast boot manager i izbaci stari suse 10 boot iz gruba
Drajver instaliraj na taj novi kernel pa uradi hsfconfig u normalnom build direktorijumu
Ovo sve zato sto mislim da nemas neke module kod kernela na koji si kompilovao drajverNe bih da radim ponovnu instalaciju SUSE-a, trebalo mi je vremena da sve sredim a nisam nesto previse menjao sistemske programe.
Datoteke u /etc/ppp nisam menjao rucno otkud ti to, na “nobsd” sam naisao samo u /etc/ppp/options.pptp i to kao:
nobsdcomp
nodeflateDrajver ni ja nisam mogao da kompaliram iz prve, pa sam i ja prov kopirao /boot/config-xx u /usr/src/linux/.config uradio make menuconfig, make i make modules. Nisam nista instalirao jer je to isto jezgro. E onda sam uspeo da instaliram drajver.
Sto se tice servisa, evo ovi servisi su mi ukljuceni:
susefirewall2_init
susefirewall2_setup
acpid
autoyast
boot.crypto
boot.preload
boot.preload_early
boot.subdomain
cron
dbus
earlykbd
earlykdm
earlysyslog
fbset
haldaemon
kbd
microcode
network*
portmap
random
resmgr
rpmconfigcheck
sane-dev
setserial
smpppd
snmpd
splash
splash_early
syslog
xdmnetwork sam pokusao da iskljucim (u yast-u) ali nije hteo.
Inace, da li i sa Mandrake distribucijom postoji ovakav problem, tj. da li se drajver (patch-ovan) za ovaj modem lakse instalira tj. radi (kao na Slackware-u) ili je isti slucaj kao sa Mandrake-om?
Na mandriva 2006 rc1 na 3 diska opet sam imao problem (samo neznam sta je falilo)
Mozda bi koristio mandrivu sada da sam uspeo pptp da radi na lan-u
Uopste mi nije jasno sta nije uredu na route tabli mandrive
U svakom slucaju ces lakse koristiti taj modem na suse distrou jer ima bolji wvdial i tdAko nije modul onda mora da je do provajdera
Ja se logujem bez problema na sezam a probao sam i krstaricin broj i radi
Onaj 041555 radi sigurno ma kako namestio modeU yast2 —-network services imas ntp client i mail transfer
Мораш бити пријављен да би поставио коментар у овој теми.