- This topic has 4 odgovora, 2 glasa, and was last updated 21 years, 7 months ranije by
.
-
Članci
-
Nikako ne mogu da ga poteram. Skinuo sam sa Linux Packages verziju 1.0 pre5 koju sam instalirao putem Kpackage-a. Takodje sam skinuo divx 5.05 i win32 codecs. Gde da kopiram win32, i da li ima neko neki savet?
Ja sam bas tu pre5 verziju juce komplajlirao iz source-a bez dodatnih paketa i sve je proslo bez problema.
Ako hoces da imas graficko okruzenje, vodi racuna da dodas da pri konfigurisanju dodas –enable-gui$./configure –enable-gui
$make
$make install (ili checkinstall)Moras da skines i neki skin i da ga otpakujes u $.mplayer/Skin/default i da u .mplayer kopiras neki .tft font za subtittle
pleyer se startuje sa gmplayerEvo, nisam bio ovde dve nedelje, pa sam sad probao iz izvornog koda, po instalaciji sam extractovao skin i font u .Mplayer. Evo greske pri pokretanju gmplayer:
Bane@darkstar:~$ gmplayer
MPlayer 1.0pre5-3.3.4 (C) 2000-2004 MPlayer TeamCPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 2005 MHz (Family: 6, Stepping: 1)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSEReading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory
Reading config file /home/Bane/.mplayer/config
[cfg] read config file: /home/Bane/.mplayer/gui.conf
Reading config file /home/Bane/.mplayer/gui.conf
vo: X11 running at 1024×768 with depth 24 and 32 bpp (“:0.0” => local display)
Reading /home/Bane/.mplayer/codecs.conf: Can’t open ‘/home/Bane/.mplayer/codecs.conf’: No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can’t open ‘/usr/local/etc/mplayer/codecs.conf’: No such file or directory
Using built-in default codecs.conf.
Font /home/Bane/.mplayer/font/font.desc loaded successfully! (233 chars)
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding “echo 1024 > /proc/sys/dev/rtc/max-user-freq” to your system startup scripts.
Using usleep() timing
Can’t open input config file /home/Bane/.mplayer/input.conf: No such file or directory
Can’t open input config file /usr/local/etc/mplayer/input.conf: No such file or directory
Falling back on default (hardcoded) input config
SKIN dir 1: ‘/home/Bane/.mplayer/Skin’
SKIN dir 2: ‘/usr/local/share/mplayer/Skin’Nakon toga, pokrenem film:
Playing /mnt/win_d/Top/Happy Gilmore/Happy Gilmore.avi.
AVI file format detected.
VIDEO: [DIV3] 576×312 24bpp 25.000 fps 997.2 kbps (121.7 kbyte/s)
SUB: Detected subtitle file format: subviewer
SUB: Read 1112 subtitles.
SUB: added subtitle file (1): /mnt/win_d/Top/Happy Gilmore/Happy Gilmore.srt
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 12000->176400 (96.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
open: No such device
vo_mga: Couldn’t open /dev/mga_vid
Error opening/initializing the selected video_out (-vo) device.Ja ne kontam sta ovde treba uraditi, pa ako neko ima resenje, hvala!!!
Probaj da ga pokrenes iz konzole ovako:
#mmplayer -vo x11 -fs -zoom -sub Prevod.sub Film.avi
ako radi pokreni gmpplayer, pa u opcijama namesti da ti Video Out (ili tako nesto) bude x11
Forum ‘Softver’ je zaključan za nove teme i odgovore.