- This topic has 17 одговора, 8 гласова, and was last updated 20 years, 10 months раније by
.
-
Чланци
-
DO use the following line as the email Subject Line, to alert cogent experts:
scanModem, Fedora Core release 4 (Stentz)
Kernel kernel 2.6.11-1.1369_FC4
Occassionally reponses are blocked by an Internet Provider mail filters.
So do in a day also check the Archived responses at [email protected]
Code updated on: 2005_August_24
———— ————– System information ————————
Fedora Core release 4 (Stentz)
Kernel
on System with processor: i686
currently under kernel: 2.6.11-1.1369_FC4There are emerging complications under 2.6.10 and later kernels.
Concerning Intel-536ep and 537
http://www.ubuntulinux.org/wiki/IntelFiveThreeSixEPModemHowto/
http://linmodems.technion.ac.il/archive-fifth/msg00280.html
http://linmodems.technion.ac.il/archive-fifth/msg00881.htmlThe kernel-2.6.11-1.1369_FC4 was compiled with CONFIG_REGPARM, providing more compact and faster code.
The kernel was assembled with compiler: 4.0.0
with current System compiler GCC=4.0.0Checking for kernel-headers needed for compiling.
The kernel-headers have base folder:
/lib/modules/2.6.11-1.1369_FC4/build -> ../../../usr/src/kernels/2.6.11-1.1369_FC4-i686
Modem symbolic link is: /dev/modem -> /dev/ttyLT0
Checking for modem symbolic link support lines within /etc/udev/ filesUSB modem not detected.
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Modem candidates are at PCI_buses: 00:0a.0
Providing detail for device at 00:0a.0
with vendor-ID:device-ID
—-:—-
Class 0780: 11c1:048c Communication controller: Agere Systems (former Lucent Microelectronics) V.92 56K WinModem (rev 02)
SubSystem 11c1:044c Agere Systems (former Lucent Microelectronics): Unknown device 044c
Flags: bus master, medium devsel, latency 32, IRQ 10—–PCI_IDs——- –CompilerVer-
Feature List: Primary Subsystem Distr KernelVer kernel default CPU
./scanModem test 11c1:048c 11c1:044c redhat 2.6.11-1.1369_FC4 4.0.0 4.0.0 i686== Checking PCI IDs through modem chip suppliers ==
Vendor 11c1 corresponds to Lucent Technologies or subsidiary Agere Systems, Inc.
Information is at: http://www.agere.com/client/modem_dsp.html. Produced are both:
1) modems identifiable from their primary PCI IDs and
2) soft modem Subystem chips requiring identification through codec readouts.Class 0703: 11c1:048c is still NOT supported under Linux, as of 2005_August_24
It is a “software” modem without a digital signal processing (DSP) chipset.
The ltmodem drivers from http://ltmodem.heby.de resources for DSP modems do NOT provide support,
A dialout terminates with “No Carrier” or a Hang if usage of the ltmodem drivers is attempted.======= PCI_ID checking completed ======
Update=2005_August_24
A PCMCIA CardBus is not detected on this System.For information on modem port creation under the UDEV device file system see:
http://linmodems.technion.ac.il/archive-fourth/msg03299.html for Conexnant modems
http://linmodems.technion.ac.il/archive-fifth/msg01177.html for Lucent/Agere DSP modemsThe following information blocks just query some ppp support items.
====================================================
grep -rs ppp /etc/modprobe.*
————————————-
/etc/modprobe.conf.dist:alias tty-ldisc-3 ppp_async
/etc/modprobe.conf.dist:alias tty-ldisc-14 ppp_synctty
/etc/modprobe.conf.dist:alias ppp-compress-18 ppp_mppe
/etc/modprobe.conf.dist:install ppp-compress-21 /bin/true
/etc/modprobe.conf.dist:alias ppp-compress-24 ppp_deflate
/etc/modprobe.conf.dist:alias ppp-compress-26 ppp_deflate
————————————-
PPP support module bsd_comp.ko not found!
Resident PPP support modules are properly uncompressed .
COMM services are not activeThe current modem symbolic link is: /dev/modem -> /dev/ttyLT0
The ports /dev/ttyS0 or 1,2,3 are for standard Controller chip modemsNo devfsd.conf file found, indicated absense of the devfsd daemon package
for device file system (devfs) symbolic link support.DEVFSD=
—- dmesg queries ——-
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
ibm_acpi: ec object not foundBeginning with Fedora 2 kernel-2.6.6-1.427, kernel-headers needed
for compiling drivers are provide at: /lib/modules/kernel-version/build/
Thus upgrading above kernel 2.6.5-1.358 to 2.6.6-* is Stongly Recommendedpppd version 2.4.2 may not be fully compatible with 2.6.8 kernel releases.
If an initial CONNECT is achieved without PPP being subsequently established,
drop back to a 2.4.1 version. This has worked for PCTEL AMR modem users,
supported by the http://www.smlink.com slmodem software.
Check pppd version with:
pppd –version
See http://linmodems.technion.ac.il/archive-fourth/msg03167.htmlFor kernel-version 2.4.20-8 , a failure in automatic loading of PPP related modules
has been reported. It was necessary to manually load with:
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_generic
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_deflate
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_synctty
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_async
or dialout efforts failed.The Internet Configuration Wizard writes a configuration file:
/etc/wvdial.conf
containing a line default line
Stupid Mode = yes
Better dialup performance may be achieved by commenting out this line as:
# Stupid Mode = yes
If the Smartlink slmodemd is used for port creation, an added line is necessary
Carrier Check = no
Also non-USA Users may need to add to the [Modem0] block:
Init2 = AT+GCI=hexadecimal_country_code
but test without it first.redhat is not yet providing pre-compiled drivers for WinModems
STA DALJE????
Class 0703: 11c1:048c is still NOT supported under Linux, as of 2005_August_24
It is a “software” modem without a digital signal processing (DSP) chipset.
The ltmodem drivers from http://ltmodem.heby.de resources for DSP modems do NOT provide support,
A dialout terminates with “No Carrier” or a Hang if usage of the ltmodem drivers is attempted.Nista, menjaj modem.
Izvinite zbog pitanja, ali kako se kompajlira drajver za modem? Odnosno, kako se kompajlira?
Kad skines driver za modem imas u njemu readme pa procitaj.
Know that! 😉
Ali ne znam “španski”. 😕 Nema veze… koliko vidim i “napredniji korisnici” su imali problema sa Lucentom, tako da polako odustajem… Ićiću na net preko Windowsa sve dok ne kupim eksterni modem.Doole, il može preporuka za neki određeni model?
Hvala Doole!
Baš sam sada bio na Sweexovom sajtu… i sad… da li je bolje uzeti USB ili serial? Ako možeš da navedeš prednosti mane?
Мораш бити пријављен да би поставио коментар у овој теми.