- This topic has 10 одговора, 6 гласова, and was last updated 20 years, 7 months раније by
.
-
Чланци
-
Skinuo sam
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/ltmodem-2.6-alk-8.tar.bz2Probao da iskompajliram i radi a zatim po uputstvu:
1) Install kernel-sources.
2) Download and unpack http://linmodems.technion.ac.il/packages/l…-alk-7b1.tar.gz ..samo ovaj ne ce al’ ovaj gore oce…8-mica..:)
3) In Makefile set variable ‘KERNEL_DIR’ to ‘/usr/src/linux-2.6.13-15’ and run ‘make’. Copy files ltmodem.ko and ltserial.ko to /lib/modules/2.6.13-15-default/extra.
4) Create or edit file ‘/etc/modprobe.d/ltmodem’
alias char-major-62 lt_serial
5) Run ‘depmod -a’ and ‘modprobe ltserial’. Now ‘/dev/ttyLTM0’ is your modem device
6) Configure modem with Yast adding providers …Problem je shto kada se zakachim na net sa Kinternetom jer kppp ima neki problem(o tome kasnije) nece nishta da otvara nema protoka…gledao sam firewall u Yast2 i sve je otvoreno a ni da makne protok. i tako pola minute mah i onda puken veza evo log:
SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: –> WvDial: Internet dialer version 1.54.0
pppd[0]: –> Initializing modem.
pppd[0]: –> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: –> Modem initialized.
pppd[0]: –> Sending: ATDT042110110
pppd[0]: –> Waiting for carrier.
pppd[0]: ATDT042110110
pppd[0]: CONNECT 45333 V42bis
pppd[0]: –> Carrier detected. Waiting for prompt.
pppd[0]: CVX Access Switch.
pppd[0]: Access is restricted to authorized users only.
pppd[0]: login:
pppd[0]: –> Looks like a login prompt.
pppd[0]: –> Sending: v.i.p
pppd[0]: v.i.p
pppd[0]: password:
pppd[0]: –> Looks like a password prompt.
pppd[0]: –> Sending: (password)
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: –> Hmm… a prompt. Sending “ppp”.
pppd[0]: ppp
pppd[0]: ‘ppp’ is not a valid command.
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: –> Hmm… a prompt. Sending “ppp”.
pppd[0]: ppp
pppd[0]: ‘ppp’ is not a valid command.
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: –> Hmm… a prompt. Sending “ppp”.
pppd[0]: ppp
pppd[0]: ‘ppp’ is not a valid command.
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: –> Don’t know what to do! Starting pppd and hoping for the best.
pppd[0]: Serial connection established.
pppd[0]: Renamed interface ppp0 to modem0
pppd[0]: Using interface modem0
Status is: connecting
pppd[0]: Connect: modem0 /dev/ttyLTM0
pppd[0]: LCP: timeout sending Config-Requests
pppd[0]: Connection terminated.
Status is: disconnecting
pppd[0]: Terminating on signal 15
pppd[0]: Modem hangup
Status is: disconnected
pppd[0] died: A modem hung up the phone (exit code 16)Znachi ni makac.
Problem sa KPPP-om
Iako je setovan /dev/modem (simlink od dev/ttyLTM0..jer njega ne mogu iz liste da biram) na upit Query modem javlja greshku da ne moze da napravi lock fileAko moze neka pomoc jer mi je prvi put na SUSE-u i na oko deluje bolje(lepshe) od Mandrive 2006 gde se ovaj modem nameshta ochas posla i odmah radi KPPP.
Kad neko napise da trazi pomoc oko Lucenta na Linuxu, ljudi se zgroze jer mislim da je to najgori moguci za namestanje na Linuxu. Prijatelju moj, zasto ne uzmes vec odavno prostudiran 536ep koji provereno radi? To ti je 800 din i miran si zbog cimanja i nerviranja oko namestanja… Moj ti je savet a i znam da se i mnogi drugi ovde slazu sa tim. Ipak investicija u Linux ti je 200-300 din za distro i 800 din za modem, znaci 1000 din i sve radi perfektno, zar ne??? To i nije mnogo.
POZDRAV
Namestio sam kppp i sad radi internet a preko kinterneta nece i dalje al’ nema veze kad radi kppp.
chmod +s /usr/sbin/pppd
chmod a+rw /dev/ttyLTM0
chmod a+rw /var/log/messages
chmod a+rw /var/lock
napravi se syslog.ppp i syslog a potom:
chmod a+rw /var/log/syslog.ppp
chmod a+rw /var/log/syslog
chmod a+rw /var/log/messages (ovo trazi ponovo iz samo njemu poznatog razloga)
a onda ln -s /dev/ttyLTM0 /dev/modem
Ma znam ja za intel ali ovaj moj lucent je malo stariji pa zato radi. Pretpostavka. Kad radi na Mandrivi shto ne bi i na suse-u. Chim se iskompajlirao kerenl modul odmah sam rekao to mora da radi.
meni je lucent na suse 9.1 super radil
sam se driver instaliral kod konfiguracije
al na 10tki nece nikak 🙁……………………
pppd[0]: –> Hmm… a prompt. Sending “ppp”.
pppd[0]: ppp
pppd[0]: ‘ppp’ is not a valid command.
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: –> Hmm… a prompt. Sending “ppp”.
pppd[0]: ppp
pppd[0]: ‘ppp’ is not a valid command.
………………Ukljuci stupid mode u yast modem podesavanjima i neces imati ovaj login problem jer nece cekati ovaj prompt i td odnosno ce se jednostavno ulogovati……..bla bla
Trebalobi da se uloguje ovako
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: –> WvDial: Internet dialer version 1.54.0
pppd[0]: –> Initializing modem.
pppd[0]: –> Sending: AT &FW3+MS=V92,1,28800,33600,28800,56000
pppd[0]: AT &FW3+MS=V92,1,28800,33600,28800,56000
pppd[0]: OK
pppd[0]: –> Sending: ATX3
pppd[0]: ATX3
pppd[0]: OK
pppd[0]: –> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: –> Sending: ATX3
pppd[0]: ATX3
pppd[0]: OK
pppd[0]: –> Modem initialized.
pppd[0]: –> Sending: ATDP633000
pppd[0]: –> Waiting for carrier.
pppd[0]: ATDP633000
pppd[0]: CONNECT 49333 V42B
pppd[0]: –> Carrier detected. Chatmode finished.
pppd[0]: Serial connection established.
pppd[0]: Renamed interface ppp0 to modem0
pppd[0]: Using interface modem0
Status is: connecting
pppd[0]: Connect: modem0 /dev/modem
pppd[0]: PAP authentication succeeded
pppd[0]: local IP address 212.xxx.xxx.xxx
pppd[0]: remote IP address xxx.xxx.xxx.xx
pppd[0]: primary DNS address xxx.xxx.xxx.xx
pppd[0]: secondary DNS address xxx.xxx.xxx.xx
pppd[0]: Script /etc/ppp/ip-up finished (pid 12667), status = 0x0
Status is: connectedVerovatno da pri instalaciji drajvera za taj modem dobijas simbolicni link /dev/modem na tvoj /dev/ttyLTM0
Kinternet odnosno wvdial koriste ovaj link /dev/modem i tako trebas i upisati u yastu kao modem
Ako nece da radi link probal da napravis rucno
rm -f /dev/modem
ln -sv /dev/ttyLTM0 /dev/modemProbacu jer ne znam zashto al’ kppp radi dok ne resetujem mashin a onda ponovo moram da radim chmod a+rw za /dev/ttyLTM0. E sad valja se prenosi to i na symlink ili ide josh neki swich ..mislim -R ili sl.
P.S. Da ne ode u off josh samo kad bi naterao OpenGL driver za ovo moje chudo od 9800pro All-in-Wonder. Da probam da deinstaliram MESA paket pa onda do probam. Ne moze da se iskompajlira deo sa wraperom i postoji i agpgart problem.
Namestio sam stupid i sad radi kinternet.
kppp nece i dalje dok se ne odrade chmod a+rw /dev/ttyLTM0 u kom konfiguracijonom fajlu da dodam da se to odradi svaki put kad se podize sistem.probaj da stavis skriptu koja ce da ti odradi taj chmod u cron daily
i tako ce ti se skripta iz dana u dan ucitavati..normalno kao rootNamestio sam stupid i sad radi kinternet.
kppp nece i dalje dok se ne odrade chmod a+rw /dev/ttyLTM0 u kom konfiguracijonom fajlu da dodam da se to odradi svaki put kad se podize sistem.Lupi mu jedan:
mcedit /etc/init.d/boot.local
kao root i onda će ti se sve samo kasti 🙂
Мораш бити пријављен да би поставио коментар у овој теми.