Početak›Форуми›Linuks distribucije›Mandriva›Softver›lilo.conf
- This topic has 4 odgovora, 3 glasa, and was last updated 20 years, 2 months ranije by
tane.
-
AutorČlanci
-
30. jula 2003. u 10:06 am #2799
Ljuba
UčesnikImam SuSE 8.2 i otkrio sam da nemam /etc/lilo.conf.
ta da radim?
P.S. Verovatmno zato i ne mogu da ugasim mainu.30. jula 2003. u 1:05 pm #12958Slsimic
UčesnikLiLo je boot menadzer i nema veze sa gasenjem (bar koliko ja znam) 🙂
Moguce je da nemas lilo.
conf jer LILO nije ni instaliran… tj ako SuSE koristi GRUB kao boot manager.
Ili probaj da pretrazis disk sa ili jer SuSE zna da konfiguracione fajlove stavlja na razlicita mesta od ostalih distribucija.
Mozda bi neko ko ima instaliran SuSE 8.2 bio vise od pomoci.30. jula 2003. u 2:29 pm #12959tane
Učesnikima grub io je mnogo bolji
boot loader od lilo-a
malo je komplikovan ali jebita?n.
sve radnje radi.
Moe ?k da igra igrice u njemu:)30. jula 2003. u 2:57 pm #12960Ljuba
UčesnikOK
ta da radim sa ovim to sam dobio od SuSE-a?Symptom:
Since SuSE Linux 7.1 all kernel include APM Advanced Power
Management support; if you shutdown the computer it will not
be switched off either. Possibly a ‘Segmentation Fault’
occurs.Cause:
Defective or respective a not conformable BIOS regarding to
the specifications.Solution:
n
By the use of the below mentioned kernel parameter ‘realmode APM BIOS calls’ can be activated to turn off the
computer:
apm=real-mode-poweroffIn some cases a Bios update is also helpful.
Other options:
You can switch off the APM support completely in the kernel:
apm=offDebug messages could be turned on using:
apm=debugIf you want to prevent that the PC turns off automatically
u
se:
apm=no-power-offThese parameters can particularly also be used at the boot
prompt, e.g.:
boot: linux apm=real-mode-poweroffand if needed permanently enter the parameters in the append
line in the file /etc/lilo.conf, e.g. :
append=”apm=real-mode-poweroff”Afterwards please execute grub as user root:
grub5. avgusta 2003. u 7:19 am #12961tane
UčesnikDa ima neki buggy bios.
Probaj da flashuje bios
i probaj u grubu da stavi parametar.fajl je /boot/grub/menu.lst
kernel (hd0,0)/vmlinuz root=/dev/hda2 splash=silent showopts apm=real-mode-poweroff
-
AutorČlanci
Forum ‘Softver’ je zaključan za nove teme i odgovore.