Knoppix 5.0

[miodragz]

Odlicna distribucija sve radi kako trebe osim sto ima dosta nemackog jezika jeste da je razumljivo ali ………

[brale]

probaj da u boot promptu otkucaš
[code]knoppix lang=us[/code]

[miodragz]

Ne nece probao sam,sve je na engleskom ali kad pokrenes instaler on pocne da sva upozorenja izbacuje na nemackom.

[brale]

eh pa da ovo gore se odnosi na podizanje sistema sa cd-a , ne utiče na instalaciju, to je ipak do skripte valjda.

[Анонимни]

Kako da instaliram Knoppix 5.01?
Smara da ga podizem svaki put s dvd-a

[mbursach]

mislim da ti pise u dokumetaciji na DVD-ju, cini mi se tamo gde je FAQ,
koliko se secam instalira se ovako, ukucas:

sudo knoppix-installer

i pratis uputstva. trebace ti bar 10GB slobodnog prostora.
pozdrav

[mbursach]

e da, zaboravio sam da kazem da to kucas pri bootovanju DVD-ja, znaci kad restartujes sistem, i dodje ti boot: ti onda kucas sudo knoppix-installer

eto tako..

[Анонимни]

Knoppix-installer sam uspeo da pokrenem tek kada se digao sistem (live),
i naravno sam instalirao sistem na hd.
Ima li neko pojma kako da pokrenem lucent modem
Agere Systems LT WinModem (rev 02) :),
nesto sam kao cackao ali nece. >:(
kada probam qvery modem zablokira sistem i moram rucno da restartujem komp. 😀

[tomaja]

Mozda glupo pitanje: da li si instalirao drajver i ako jesi, koji si drajver koristio ?

linux4life

[Анонимни]

Probao sam sa dva draivera ltmodem-8.31a10 sa ovom procedurom
1) Skinuti drajver sa adrese
http://linmodems.technion.ac.il drajver ltmodem-8.31a-najnovija verzija koji radi na obadva kernela bez problema

2) Otvoriti terminal i uci u direktorijum gde je skinut drajver

3) Raspakovati arhivu “ltmodem-8.31a-nesto”

4) Uci u direktorijum “ltmodem-8.31a-nesto”

5) Raspakovati arhivu source.tar.gz

6) Uci u direktorijum “source”

7) Logovati se kao superuser komandom “su”

8) Konfigurisati drajver komandom “./configure”

9) Kompajlirati drajver sa komandom “make”
Ukoliko se kompajliranje zavrsi neuspesno, proveriti dali postoji direktorijum
/usr/src/linux/.tmp_versions i/ili fajl /usr/src/linux/.__modpost.cmd
Ako postoje izbrisati ih i ponoviti kompajliranje.

10) Instalirati kernel modul komandom “make install”.
Poruku “The drivers are now installed – now run ./autoload if you want to enable automatic loading of the module”
treba ignorisati i preci na sledeci korak

11) U fajl /etc/modprobe.conf i modules.conf dodati sledeca dva reda
alias /dev/modem lt_serial
alias char-major-62 lt_serial

Nakon toga izvrsi sledece komande:

rm -f /dev/modem
mknod /dev/ttyLT0 c 62 64
ln -s /dev/ttyLT0 /dev/modem
depmod -a
modprobe lt_serial

Dobio OVO :

root@1[ltmodem-8.31a10]# cd source/
root@1[source]# ./configure
creating cache ./config.cache
Checking OS
Checking machine type
Processor i686 is supported.
checking for gcc… gcc
checking whether the C compiler (gcc  ) works… yes
checking whether the C compiler (gcc  ) is a cross-compiler… no
checking whether we are using GNU C… yes
checking whether gcc accepts -g… yes
Checking gcc major version 4
Checking for rpm build… rpmbuild
checking for a BSD compatible install… /usr/bin/install -c
checking for make… yes
checking for ld… yes
Checking for kernel headers
  … in /usr/src/linux: Kernel headers found in /usr/src/linux
  … in /usr/src/kernel-headers-2.6.17: nope
  … in /usr/src/linux-2.6.17: Kernel headers found in /usr/src/linux-2.6.17
  … in /lib/modules/2.6.17/build: Kernel headers found in /lib/modules/2.6.17/
build
  using /lib/modules/2.6.17/build
Checking kernel header version
  kernel headers are version 2.6.17
System has rpm. Checking for standard installed kernel packages
No kernel package, test for package that provides the kernel (SuSe)
rpmq: no arguments given for query
  has irq_spinlock in async_struct 0
checking for fakeroot… fakeroot
deb package will require kernel-image-2.6.17
updating cache ./config.cache
creating ./config.status
creating Makefile
creating ltinst2
creating Makefile.2.6
creating autoload
creating cleanup
creating ltmodem.spec
creating debian/changelog
creating debian/control
root@1[source]# make
make M=`pwd` -C /lib/modules/2.6.17/build modules
make[1]: Entering directory `/UNIONFS/usr/src/linux-2.6.17′
  CC [M]  /ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.o
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:33:5: warn
ing: “FORCEMODVERSIONS” is not defined
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:43:5: warn
ing: “FORCEMODVERSIONS” is not defined
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:210: error
: syntax error before string constant
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:210: warni
ng: type defaults to ‘int’ in declaration of ‘MODULE_PARM’
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:210: warni
ng: function declaration isn’t a prototype
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:210: warni
ng: data definition has no type or storage class
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:212: error
: syntax error before string constant
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:212: warni
ng: type defaults to ‘int’ in declaration of ‘MODULE_PARM’
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:212: warni
ng: function declaration isn’t a prototype
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:212: warni
ng: data definition has no type or storage class
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:217: error
: syntax error before string constant
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:217: warni
ng: type defaults to ‘int’ in declaration of ‘MODULE_PARM’
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:217: warni
ng: function declaration isn’t a prototype
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:217: warni
ng: data definition has no type or storage class
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:221: error
: syntax error before string constant
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:221: warni
ng: type defaults to ‘int’ in declaration of ‘MODULE_PARM’
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:221: warni
ng: function declaration isn’t a prototype
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:221: warni
ng: data definition has no type or storage class
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c: In functi
on ‘lt_pci_find_device’:
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:261: error
: ‘PCI_DEVICE_ID_ATT_L56XMF’ undeclared (first use in this function)
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:261: error
: (Each undeclared identifier is reported only once
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:261: error
: for each function it appears in.)
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c: In functi
on ‘SetLtModemInterface’:
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:684: warni
ng: implicit declaration of function ‘inter_module_get’
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:691: warni                  ng: ‘inter_module_put’ is deprecated (declared at include/linux/module.h:567)
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c: In functi                  on ‘init_module’:
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:714: warni                  ng: ‘inter_module_register’ is deprecated (declared at include/linux/module.h:56                  3)
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:715: warni                  ng: ‘inter_module_register’ is deprecated (declared at include/linux/module.h:56                  3)
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c: In functi                  on ‘cleanup_module’:
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:723: warni                  ng: ‘inter_module_unregister’ is deprecated (declared at include/linux/module.h:                  564)
/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmodem.c:724: warni                  ng: ‘inter_module_unregister’ is deprecated (declared at include/linux/module.h:                  564)
make[2]: *** [/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/source/ltmode                  m.o] Error 1
make[1]: *** [_module_/ramdisk/home/knoppix/Desktop/lucent/ltmodem-8.31a10/sourc                  e] Error 2
make[1]: Leaving directory `/UNIONFS/usr/src/linux-2.6.17′
make: *** [all] Error 2
root@1[source]#

I ltmodem 2-6-alk-8.tar.bz2
Po ovoj proceduri

mkdir ~/lucent
–iskopiras ltmodem-2.6-alk-8.tar.bz2 u novi folder i udjes u njega ,  raspakujes,

cd ~/lucent
tar jxf ltmodem-2.6-alk-8.tar.bz2

kada se raspakuje driver mora da se prepravi Makefile i lt_modem.c

u lt_modem.c se:
– red 123 zameni sa module_param(vendor_id, int, 0);
– red 125 zameni sa module_param(device_id, int, 0);
– red 130 zameni sa module_param_array(Forced, int, NULL, 0);
sve malim slovima,
    u Makefile:
  se stavi adekvatan KERNEL_DIR , vidis sa uname -r i uneses.

        mknod –mode=0660 /dev/ttyLTM0 c 62 64
        ln -s /dev/ttyLTM0 /dev/modem

        mkdir /lib/modules/`uname -r`/other

        cp ltmodem.ko /lib/modules/`uname -r`/other
        cp ltserial.ko /lib/modules/`uname -r`/other

        depmod -a
        modprobe ltserial

  kate /etc/modprobe.conf
  — i dopisati :
      install winmodem /sbin/modprobe ltserial
      alias /dev/modem ltserial
      alias char-major-62 ltserial
      alias /dev/tts/LT0 ltserial

      kate /etc/modprobe.preload
  — i dopisati :
      winmodem

[Аутор]

Чланци