Intex TV kartica?

[lukic]

Imam instaliran lirc.
Ali u nemam lirc-modules. Jel moze lirc-modules-sources?

[tomaja]

Moguće je sa podrška već iskompajlirana u kernelu, mada neće škoditi 🙂
Pogledaj http://www.lirc.org/html/install.html#dependencies

linux4life

[dukenukem_4d]

ako mogu nešto da se ubacim ,pre neki dan sam odgovarao na slično pitanje
(ovde , http://www.ubuntu-rs.org/forum/viewthread.php?tid=6118&page=2#pid80491  )

za ubuntu ovde bi trebalo da se konsultuje , ali ne mora uvek da važi
https://help.ubuntu.com/community/InstallLirc/Hardy

ovo bi bilo od interesa ,najviše ,ispis komande
[code]
cat /proc/bus/input/devices
[/code]

kao i ove komande (prilagođena za ovaj slučaj ,nadam se ,ako nije menjan raspored pci kartica)
[code]
lspci -s 01:06.0  -vvnn
[/code]

ovaj link bi možda bio najrelevantniji ,
http://www.wlug.org.nz/TvTunerCards 
nadole do dela Infrared Remote

možda ima još neka tema na ubutnu-rs u vezi saa713x i daljinskog
ali na starijim kernelima ide pomoću drugog drajvera ,koji bi se ovde preklapao
sa postojećim in-kernel  nekim od drajvera ,recimo tako nekako ?

[dukenukem_4d]

alternativno ,ako postoji saa7134 u ispisu cat /proc/bus/input/devices
možda može da se prođe sa zero-konfiguracijom
(kako ovaj prog nije zapažen nije mi jasno ??? )
http://packages.ubuntu.com/intrepid/inputlirc
8.10 intrepid ,npr ako se doda iz sinaptika

http://www.nabble.com/inputlirc:-zeroconf-LIRC-daemon-using-Linux-input-event-devices-td2857590.html
http://www.digipedia.pl/man/inputlircd.8.html
koliko sam skontao on se poveže automatski na neki /dev/input/eventX
sa jedne strane, a sa druge strane se ponaša kao lirc deamon na koga mogu da se povezuju
klijenti 😀 (NE mora da se pravi lircd.conf )

šta da se uradi ?
u ispisu cat /proc/bus/input/devices  pogledaš koji event (event1 ili event2 ili event 5)
je povezan sa saa7134

u konfiguracionoj datoteki
/etc/default/inputlirc
postaviš u prvoj liniji koji je tačna brojka  eventX umesto *

EVENTS=”/dev/input/event*”

ako po restartu je druga brojka mora da se fiksira taj event što je objašneno negde na ubuntu-rs,valjda

i da se restartuje taj servis
[code]
/etc/init.d/inputlirc restart
[/code]

sa programom iz lirc paketa
[code]irw[/code]
se vide  kako je kernel obeležio dugmiće
(pošto pritisneš taster on ispiše )
kad počne da ispisuje na pritisak tastera više od pola posla je gotovo 😀

posle toga da se  u home folderu eventualno edituje ~/.lircrc za pojedine aplikacije?

(mislim da ovaj način sa inputlircd ima prob. sa kde3 i njegovim onim gui za lirc,
dok kde4 nema još taj gui ,pa nema taj prob. 😀 )

[lukic]

Instalirao sam inputlirc.
Video u cat /proc/bus/input/devices da mi je event6 i izmenio sam EVENTS=”/dev/input/event*”. Kad sam restartovao sve je ostalo kako treba.
Onda sam u terminalu kucao irw i probao tastere na daljinskom ali se nista nije ispisivalo.

[dukenukem_4d]

ok ,čekaj je si stavio EVENTS=”/dev/input/event6″ ,kao root i snimio ?

ako ne ide ovako  onda mora ipak lirc da se podešava
(EDIT: deinstaliraš prvo inputlirc 😉 )

kao ovde
http://www.ubuntu-rs.org/forum/viewthread.php?tid=440&page=2
počev od linije  gde piše (ako je ovaj event6 uvek isti)
[code]
sudo gedit /etc/lirc/hardware.conf
[/code]

~~~~~~~~~
# Run “lircd –driver=help” for a list of supported drivers.
DRIVER=”dev/input”
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE=”/dev/input/event6″
MODULES=””
~~~~~~~~

ali mislim da moraš da snimiš sam lircd.conf
pomoću irrecord
valjda je ova komanda

[code]
irrecord –driver=dev/input –device=/dev/input/event6 moj_intex.conf
[/code]
pa se ovaj moj_intex.conf ukopira pod drugim imenom kao /etc/lircd.conf
pa da se restartuje lirc servis

[lukic]

EVENTS=”/dev/input/event6 sam odradio kao root i snimio.
Sad sam obrisao i inputlirc.
Kad otkucam sudo gedit /etc/lirc/hardware.conf dobijem:

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE=”Flyvideo 98FM (LR50Q) / Typhoon TView TV/FM Tuner (card=36)”
REMOTE_MODULES=”devinput”
REMOTE_DRIVER=””
REMOTE_DEVICE=”/dev/lirc0″
REMOTE_LIRCD_CONF=”life-view/lircd.conf.flyvideo”
REMOTE_LIRCD_ARGS=””

#Chosen IR Transmitter
TRANSMITTER=”Custom”
TRANSMITTER_MODULES=””
TRANSMITTER_DRIVER=””
TRANSMITTER_DEVICE=””
TRANSMITTER_LIRCD_CONF=””
TRANSMITTER_LIRCD_ARGS=””

#Enable lircd
START_LIRCD=”true”

#Don’t start lircmd even if there seems to be a good config file
#START_LIRCMD=”false”

#Try to load appropriate kernel modules
LOAD_MODULES=”true”

# Default configuration files for your hardware if any
LIRCMD_CONF=””

#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn’t have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to “false”
FORCE_NONINTERACTIVE_RECONFIGURATION=”false”
START_LIRCMD=””

Uopste ga nema ovaj deo:

# Run “lircd –driver=help” for a list of supported drivers.
DRIVER=”dev/input”
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE=”/dev/input/event6″
MODULES=””

[dukenukem_4d]

ok , izgleda da su nešto promenili u sistemu i nije isto ko pre 🙁

http://www.uluga.ubuntuforums.org/showthread.php?t=1039168
https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/164627
http://ubuntuforums.org/archive/index.php/t-818660.html

po prvom linku probaj da staviš

[code]
REMOTE_MODULES=””
REMOTE_DRIVER=”devinput”
REMOTE_DEVICE=”/dev/input/event6″
[/code]

možda i da se stavi da bude prazan
REMOTE_LIRCD_CONF=””
pa onda da se snimi novi lircd.conf ?

a ako javi grešku negde tek posle da se opravlja lirc.fdi ?

[lukic]

Uradio sam ovo sto si napisao i kad sam probao da snimim novi lircd.conf dobijem:

irrecord –  application for recording IR-codes for usage with lirc

Copyright (C) 1998,1999 Christoph Bartelmus([email protected])

irrecord: initializing ‘/dev/input/event6’
This program will record the signals from your remote control
and create a config file for lircd.

A proper config file for lircd is maybe the most vital part of this
package, so you should invest some time to create a working config
file. Although I put a good deal of effort in this program it is often
not possible to automatically recognize all features of a remote
control. Often short-comings of the receiver hardware make it nearly
impossible. If you have problems to create a config file READ THE
DOCUMENTATION of this package, especially section “Adding new remote
controls” for how to get help.

If there already is a remote control of the same brand available at
http://www.lirc.org/remotes/ you might also want to try using such a
remote as a template. The config files already contain all
parameters of the protocol used by remotes of a certain brand and
knowing these parameters makes the job of this program much
easier. There are also template files for the most common protocols
available in the remotes/generic/ directory of the source
distribution of this package. You can use a template files by
providing the path of the file as command line parameter.

Please send the finished config files to so that I
can make them available to others. Don’t forget to put all information
that you can get about the remote control in the header of the file.

Press RETURN to continue.

Hold down an arbitrary button.
irrecord: gap not found, can’t continue
irrecord: closing ‘/dev/input/event6’

???

[dukenukem_4d]

molim te postavi ispise ovih komandi :
(ima neki problem ali  ne mogu na slepo da odgovaram )
[code]
cat /proc/bus/input/devices
[/code]

[code]
ls -la /dev/lirc*
ls -la /dev/lirc/*
ls -o /dev/input/by-path/
lspci -s 01:06.0  -vvnn
ls /dev/input
[/code]

(pošto probaš  snimanje sa irrecord , pritisni veći broj tastera ) pa ceo ispis od
[code]
dmesg
[/code]

(upakuj sva 3 u .tar.bz2 arhivu ili .zip  i okači kao prilog)

ovde se javlja ta greška
http://www.gossamer-threads.com/lists/ivtv/devel/32332
http://www.nabble.com/gap-not-found,-can’t-continue-td15910771.html
http://ubuntuforums.org/showthread.php?t=578789

[Autor]

Članci