hdparm

[LYb]

Da, prva tri komada.

multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)

Potrudi se da podesis i odgovaraju DMA mod za hard. Kod mene je recimo UDMA6.

[BrokeBody]

OK, hvala puno.

[BrokeBody]

[code]/dev/hda:
multcount = 1 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 65535/16/63, sectors = 78177792, start = 0
stefan@stefan:~$[/code]

A jel’ si siguran da je multcount = 16 (on)? Meni je multcount = 1 (on).

[LYb]

Ti si ga podesio na 1. Pogledaj man hdparm, posebno opciju -m, mnogo stosta postane jasno kad se procita dokumentacija.

[BrokeBody]

Ma sada imam jedan drugi problem. Sve ja podesim kako si mi rekao. I za hda, hdc i hdd. Svuda je isto. Cim restartujem masinu opet mi se sve vrati na staro, osim hdc. Za hdc sve ostane isto. Ukljucim ja i ono keepsettings, ali kada restartujem masinu i ono se vrati na =0. Sve se vrati na staro. 😥

Pa sta sad kog djavola?!?

[BrokeBody]

Ovako je sada:
[code]stefan@stefan:~$ sudo hdparm /dev/hda

/dev/hda:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 65535/16/63, sectors = 78177792, start = 0
stefan@stefan:~$ sudo hdparm /dev/hdc

/dev/hdc:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument
stefan@stefan:~$ sudo hdparm /dev/hdd

/dev/hdd:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument
stefan@stefan:~$[/code]

Cim restartujem racunar, odmah se sve vraca na staro kod hda i hdd. Mogu da ukljucim i keepsettings, al’ posle restartovanja isto! 🙁

[code]/dev/hda:
multcount = 0 (off)
IO_support = 0 (16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 65535/16/63, sectors = 78177792, start = 0
stefan@stefan:~$ sudo hdparm /dev/hdc

/dev/hdc:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument
stefan@stefan:~$ sudo hdparm /dev/hdd

/dev/hdd:
IO_support = 0 (16-bit)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument
stefan@stefan:~$[/code]

[DVSoftware]

a da editujesh onaj ranije pomenuti fajl?

[BrokeBody]

Editovao sam. Sada su hdc i hdd OK… 😉
[code]stefan@stefan:~$ sudo hdparm /dev/hdc

/dev/hdc:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument
stefan@stefan:~$ sudo hdparm /dev/hdd

/dev/hdd:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Invalid argument
stefan@stefan:~$[/code]
Posle restarta se nista ne menja.

Sada zeza jos samo hda. Ako ne uspem da ga namestim, postovacu, a ako uspem…, pa opet cu da postujem.

[LYb]

Aman, covece, dodaj u tu skriptu deo koji se odnosi na hda, isto kao sto si radio za hdc i hdd.

[BrokeBody]

Zaboravio sam da obidjem ovu temu sve dok ti nisi poslao nov odgovor. Sredio sam sve sad. A ono sto sam rekao da jos samo hda zeza, to je bila greska u kuckanju kad sam menjao skriptu.

Hvala na svemu.

[Аутор]

Чланци