- This topic has 12 одговора, 4 гласа, and was last updated 22 years, 7 months раније by
.
-
Чланци
-
Kao pocetnik u Linuxu (od pre dva dana) lepo se snalazim…
Instalirao sam i drajvere za modem cak.
MEDJUTIM… To su neki FREE drajveri tako da ne mogu da surfujem 56K vec samo 16.2K (ili tako nesto)a da bi ih upgredovao u full moram da PLATIM. Pomagajte! Gde mogu naci besplatne FULL drajvere za surf na 56K. Moj modem je Conexant HCF V.90 56K. Imam Mandrake 9.2 kernel 2.4.22-10mdk
masina je i686…POMAGAJTE BRACO LINUXOVCI……
Imas li i za HSF mozda MDK9.1, [email protected]
Imate na ovom sajtu:
Drajveri za Conexant HCF modeme
Description: Drajver za Conexant HCF modeme u obliku izvornog koda
Version: 0.99 Filesize: 683.59 Kb
Added on: 02-Nov-2003 Download: 224http://www.linuxo.com/modules.php?name=Downloads&d_op=getit&lid=54
Drajveri za HSF Conexant modeme
Description: Drajveri za HSF COnexant modeme u obliku izvornog koda
Version: Filesize: 1.02 MB
Added on: 02-Nov-2003 Download: 177http://www.linuxo.com/modules.php?name=Downloads&d_op=getit&lid=55
Nemojte da vas plaši to što su u obliku izvornog koda. Instalacija je prilično jednostavna, samo pročitajte README i INSTALL.
Hvala… Probacu.
P.S. moj mail je [email protected]
Evo ga radi ko blesav, samo što sam morao da mu postavim CROATIA, i tek onda se stvorio u /dev/
Super hvala ti, nego moze li se iz tgz direktno uRPM-izirati ili mora da bude baš tar.gz????Ako imaš tako nešto za LT-a, nijedan RPM nece da mi stvori /dev/ttySLT, pa ako imaš tako jednostavan make install drajver ili link na njega….
Imama i ja neke source ali nemam nikakavu skriptu za instalaciju, MDK9.1
gcc -3.2.2
a svuda mi traži 2.2.nn ili manju, pa mi baš sve to nije najjasnije???Pa ljudi skinuo sam drajvere, i pokusao da ih instaliram, ALI desava se sledece:
[root@localhost modem]# make install
make[1]: Entering directory `/home/skeleton/Desktop/modem/inf’
mkdir -m 755 -p /etc/hcfpci/inf
install -m 644 hcf_linux.cty hcfv90_lan_linux.inf hcfv90_linux.inf hcfv92_linux.
inf hcfv92_riptide_linux.inf /etc/hcfpci/inf
make[1]: Leaving directory `/home/skeleton/Desktop/modem/inf’
make[1]: Entering directory `/home/skeleton/Desktop/modem/scripts’
sed
-e ‘s!@PREFIX@!/usr!g’
-e ‘s!@HCFTARGET@!hcfpci!g’
-e ‘s!@HCFSERDEV@!HCF!g’
-e ‘s!@HCFETCDIR@!/etc/hcfpci!g’
-e ‘s!@HCFLIBDIR@!/usr/lib/hcfpci!g’
-e ‘s!@HCFINFDIR@!/etc/hcfpci/inf!g’
-e ‘s!@HCFSERIALMINOR@!64!g’
-e ‘s!@HCFINF_FILE@!/etc/hcfpci/current.inf!g’
-e ‘s!@HCFCTY_FILE@!/etc/hcfpci/current.cty!g’
-e ‘s!@HCFLINUXVERSION@!0.99lnxtbeta03042700!g’
hcfpciconfig
chmod 755 hcfpciconfig
sed
-e ‘s!@HCFTARGET@!hcfpci!g’
hcfpcistop
chmod 755 hcfpcistop
install -m 755 hcfpciconfig hcfpcistop /usr/sbin
make[1]: Leaving directory `/home/skeleton/Desktop/modem/scripts’
make[1]: Entering directory `/home/skeleton/Desktop/modem/modules’
[color=brown][b]common.mak:11: *** Is the kernel-source package installed? KERNELSRC does not po int to a proper directory (/lib/modules/2.4.22-10mdk/build). Stop.
make[1]: Leaving directory `/home/skeleton/Desktop/modem/modules’
make: *** [install] Error 2[/b][/color]
[root@localhost modem]#A kad napisem hcfpciconfig izbaci mi ovu poruku:
WARNING: this is an EXPERIMENTAL BETA VERSION of the HCF drivers for Linux.
USE AT YOUR OWN RISK! See the file /usr/lib/hcfpci/LICENSE for details.Conexant Systems neither distributes nor maintains this package.
PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!!If you require assistance or need more information, go to:
http://www.linuxant.com/driversWhen reporting a problem for the first time, please send
us the file generated by “hcfpciconfig –dumpdiag”.Should we attempt to automatically configure your hardware? [yes]
Selected PCI VendorID=14F1 DeviceID=1033
and INF file /etc/hcfpci/inf/hcfv90_linux.infUnable to determine country, defaulting to “USA”
Configuring modem for country: “USA”
You can change this setting later with the command “hcfpciconfig –country”Warning: existing HCF modules found under /lib/modules/2.4.22-10mdk/misc/
Would you like to keep using them? [no][b][color=red]This package does not contain pre-built modules suitable for your system:
Distribution: Mandrake-9.2
Kernel arch: i686
Kernel version: linux-2.4.22-10mdk[/color][/b]
Please obtain the appropriate variant of this package for your system
or try the generic RPM or tar version.DA LI NEKO MOZE DA MI POMOGNE!!!!
Moje misljenje je da ovi drajveri ne podrzavaju M9.2 i kernel 2.4.22-10mdk
Moje misljenje je da ovi drajveri ne podrzavaju M9.2 i kernel 2.4.22-10mdk
Definitivno nije to u pitanju.
Ovi drajveri podrzavaju sve distribucije sa verzijom kernela 2.4…., ali obavezno za instalaciju moras imati kernel source (nalazi se u /usr/src), koji je neophodan za kompajliranje drajvera, tj. gradnju modula za modem.
Cim sam video da ti je verzija kernela 2.4.22-10mdk, znao sam da nemas kernel source. Poruci update CD od Tomaje, na njemu imas i novi kernel 2.4.22-18mdk (ili noviji) i kernel source za njega i to u formatu rpm (laka instalacija, zar ne). Instaliraj oba paketa i nece biti problema.Ako imaš tako nešto za LT-a
Imas, na primer (proveren):
http://www.physcip.uni-stuttgart.de/heby/ltmodem/ltmodem-8.26a9.tar.gz
Pozdrav!
Мораш бити пријављен да би поставио коментар у овој теми.