Airborne-linux-server i Medal of Honor

[gandalf]

Valjda sam nedovoljno pismen za ovo i imam problem:
Po skidanju igre Medal of Honor i raspakivanju paketa: airborne-linux-server-01112008.tar.bz2, kreira se fascikla : airborne-linux-server. U toj fascikli se ,naravno nalazi Read Me ,a u njemu pise ono sto ja nedovoljno razumem:
5) Copy the Linux-specific parts of the dedicated server to your
  Airborne installation:

    cp -av airborne-linux-server/* /where/i/uploaded/moha/
    cd /where/i/uploaded/moha

a pre toga ono sto sam i sam odradio:

4) Unpack the Linux server package (where this README came from):

    tar -xjvvf airborne-linux-server-VERSION.tar.bz2

  This will create an “airborne-linux-server” directory.

Ne znam koji su to Linux-specificni delovi koje treba kopirati,niti gde je taj :  /moha fajl-direktorijum?
Valjda sam bio jasan sta hocu.
Molio bih pomoc,ako moze.

[dukenukem_4d]

verovatno tamo gde je instalacioni direktorijum?
(onaj instaler što instalira na linuksu ,šta je u njemu pri instalaciji kao instalacioni direktorij? )

jel je ovo neki plugin ili tako nešto ::)
zaboravio sam tačno strukkturu datoteka na mohaa kako ide 🙁
(ali lepo je išla na lindži osim onog dela kad se puca na onaj avion na aerodromu)

EDIT ali ako je ovo dedicated srver ,valjda ne može da se igra grafički sa tog računara
već samo sa klijenata ??? tako nešto znači ovo dedicated server ,valjda.

[Anonimni]

@duke
Prvi put od kad se trudis da odgovaras i na moja,svakakva pitanja te nisam bas najbolje razumeo evo celog Read Me fajla:
Medal Of Honor Airborne Dedicated Server
LINUX VERSION
Readme File
Version 1.2
January 8, 2008

***************************************************************************

This document contains information about setting up and running the
Medal Of Honor Airborne Dedicated Server as well as information about
administrating it remotely.

This document only covers the Linux dedicated server. The Windows dedicated
server is a separate package.

Please note that these instructions assume some basic understanding of
how to navigate a Linux system command line. You may want to do some
research beyond this document for Linux help that is not specifically
related to Medal of Honor Airborne.

***************************************************************************

TABLE OF CONTENTS

I.      System Requirements
II.    Server Upgrade
III.    Server Setup
IV.    Running The Server
V.    Administrating Remotely
VI.      Server Commands
VII.    Credits
VIII.    HOW TO FIND FURTHER HELP AND REPORT BUGS.

I. System Requirements
===========================================================================

The following items are required to run a Medal Of Honor Airborne
Linux dedicated server.

1. A properly-configured Linux system. Any modern x86 distribution should
  work, as well as FreeBSD with the Linux binary compatibility layer.
1. A broadband Internet connection or LAN connection.
2. A system that meets or exceeds the minimum system requirements
  for the game (no graphics card required).
3. The game successfully installed on the target computer (see below).

II. Server Upgrade
===========================================================================

To UPGRADE an existing Linux game server, follow these steps. This assumes you
already have a functioning Airborne server. If you need to install a server
from scratch, please see section III (“Server Setup”) instead!

1) Shut down the game server, if it is running.

2) Unpack the Linux server package (where this README came from):

    tar -xjvvf airborne-linux-server-VERSION.tar.bz2

  This will create an “airborne-linux-server” directory.

3) Copy the Linux-specific parts of the dedicated server to your
  Airborne installation. This will overwrite several files if copied to the
  correct location.

    cp -av airborne-linux-server/* /where/i/uploaded/moha/

4) Restart the server. You are now running the latest version.

III. Server Setup
===========================================================================

To set up a new Linux game server from scratch, follow these steps. If you
just want to upgrade a functioning game server to the latest version, please
see section II (“Server Upgrade”) instead.

1) Make sure you have the game, patch and dedicated server installed on
  a local Windows machine.

2) RUN THE DEDICATED SERVER AT LEAST ONCE ON WINDOWS, to generate the .ini
  files!

  1. Run the dedicated server launcher (DSLauncher.exe)
  2. In the ‘Basic’ tab, enter the username and password you registered
      with EA. (If you have not created an account: run the game, in the
      main menu choose ‘Multiplayer’, and click ‘Create Account’).
  3. In the ‘Miscellaneous’ tab, enter the port you wish to run your
      server on as well as the password to administrate it remotely.
  4. In the ‘Map Rotation’ tab, add at least one map to your rotation
      by selecting the map name and pressing the ‘Add’ button.
  5. Configure any other options you wish to set.
  6. Save your config file using File>Save to the default MOHA config
      folder: “My DocumentsEA GamesMedal of Honor Airborne(tm)Config”.

  NOTE: The first time you run the launcher, it should generate two
  config files: MOHAGameTypes.ini and MOHAMaps.ini in the MOHA config
  folder. These files are necessary for the dedicated server to run
  properly and should only be modified by advanced users.

  7. Close the dedicated server window. Now you have all the data you need.

3) Upload everything in your Program Files/Electronic Arts/Medal of Honor
  Airborne directory to anywhere on target machine. This is a large upload–
  7.5 gigabytes–please plan accordingly. These instructions assume you’ve
  uploaded it to a path with no spaces in the name (/where/i/uploaded/moha),
  so be careful if you left it named “Medal of Honor Airborne”.
    “My DocumentsEA GamesMedal of Honor Airborne(tm)Config”.

4) Unpack the Linux server package (where this README came from):

    tar -xjvvf airborne-linux-server-VERSION.tar.bz2

  This will create an “airborne-linux-server” directory.

5) Copy the Linux-specific parts of the dedicated server to your
  Airborne installation:

    cp -av airborne-linux-server/* /where/i/uploaded/moha/
    cd /where/i/uploaded/moha

6) (Optional) Install PunkBuster:

    ./pbsetup.run -e
    ./pbsetup.run –add-game=moha –add-game-path=/where/i/uploaded/moha/UnrealEngine3/MOHAGame
    ./pbsetup.run -u

  You will need to agree to the PunkBuster license before you may install it.
  Please note that the server will malfunction if you enable PunkBuster in
  your .ini, but then fail to install it correctly!

IV. Running the server
===========================================================================

To run the server:

    cd /where/i/uploaded/moha/UnrealEngine3/Binaries
    ./mohaserver

  If everything worked out as planned, a lot of text will scroll across the
  screen, and your server will eventually appear in the in-game browser. You
  can now join the server and play.

To shut down a running server:

  Just hit CTRL-C in the terminal where the server is running and it will
  shut down cleanly.

If you run ./mohaserver without any parameters, it will attempt to
load the default config name: MOHADedicatedServer.ini. You may override this
filename with the -ConfigFile=fname.ini option.

V. Administrating Remotely
===========================================================================

Once connected, the dedicated server remote (DSRemote.exe) looks and
functions identically to the dedicated server.

To connect to a dedicated server remotely:

1. Run DSRemote.exe.
2. Enter the host name (IP address) of the server.
3. Enter the server’s port and password as specified in the config file.
4. If successful, the login dialog should disappear and “Remote
  connection accepted” will be printed.

If you receive the “Connection failed.” message, the host name or
port number was invalid. You may receive this message even with
correct values if the dedicated server has not yet initialized.

If you receive the “Login failed.” message, the connection was
successful but your password was invalid.

VI. Server Commands
===========================================================================

These commands can be executed using the remote tool on Windows. Simply
type your command in the text field at the bottom of the application and
press the ‘Execute’ button; alternatively, press the enter key.

NOTES:
– The commands are case insensitive.
– Arguments within parentheses “(” and “)” are optional
– Arguments separated by “|” are an “or” – pick one of the arguments
– In general, commands takes effect when the map starts, a map is
  restarted or when the next map starts.
– As noted below, many commands will print the current value when no
  input argument is given.

AllowAutoRifle ( On | Off )
  alias: okautorifle
    Controls whether or not the AutoRifle weapon class is allowed
    within the game.
    Note: With no arguments, the current value is displayed.

AllowRifle ( On | Off )
  alias: okrifle
    Controls whether or not the Rifle weapon class is allowed
    within the game.
    Note: With no arguments, the current value is displayed.

AllowRocket ( On | Off )
  alias: okrocket
    Controls whether or not the Rocket weapon class is allowed
    within the game.
    Note: With no arguments, the current value is displayed.

AllowSMG ( On | Off )
  alias: oksmg
    Controls whether or not the sub-machine gun weapon class
    is allowed within the game.
    Note: With no arguments, the current value is displayed.

AllowSniper ( On | Off )
  alias: oksniper
    Controls whether or not the sniper rifle weapon class
    is allowed within the game.
    Note: With no arguments, the current value is displayed.

AmmoDrop ( On | Off )
  alias: ad
    Toggle for the dropping of ammo upon player death.
    Note: With no arguments, the current value is displayed.

Ban
  alias: b
    Kicks and bans the specified player from the server.
      e.g. ban user
    Note: The player will be able to join the server but will be
          kicked at the weapons selection screen.

BanList
  alias: bl
    Prints a list of the banned players and their IDs.

BestOf
  alias: bo
    Sets the number of number of rounds that will be played and
    the number of rounds which must be won to declare a winner.
      e.g. bestof 7
      – For this example, whichever team wins 4 rounds first will
        be declared the winner.
    Note: With no arguments, the current value is displayed.
    The maximum number of rounds that may be played is capped at 99.

EndMatch
  alias: em
    Ends the current match and starts a new match on the next map
    in the rotation list.
    Note: There is no winner for the round that is currently in
          progress when this command is called.

FriendlyFire ( On | Off )
  alias: ff
    Toggles whether or not you can shoot your team mates.
    Note: With no arguments, the current value is displayed.

GameName
  alias: gn
    Sets the name that the game will be called. This is displayed on the
    game selection screen when choosing a server. The message should not
    be enclosed within “quotes”.
      e.g. gamename This is My Game
    Note: With no arguments, the current value is displayed.

GameType
  alias: gt
    Sets the type of game that will be played on the server.
      e.g. gametype ObjectiveAirborne
    Note: With no arguments, the current value is displayed.

HealthDrop ( On | Off )
  alias: hd
    Toggle for the dropping of health packs upon player death.
    Note: With no arguments, the current value is displayed.

Invincibility
  alias: inv
    Set the time that players do not take damage after a respawn.
      e.g. invincibility 7
    Note: With no arguments, the current value is displayed.

Kick
  alias: k
    Kicks the specified player from the server.
      e.g. kick user

MaxPlayers
  alias: mp
    Sets the maximum numbers of players that can enter a game.
    Note: With no arguments, the current value is displayed.

MessageOfTheDay
  alias: motd
    Sets the message that will be displayed when the game starts. The message
    should not contain any carriage returns, it should just be a string. The
    message should also not be enclosed within “quotes”.
      e.g. motd Welcome to My Game
    Note: Maximum string length is 255 characters. With no arguments,
          the current value is displayed.

NextMap
  alias: nm
    Same as EndMatch

PlayerList
  alias: pl
    Prints a list of the players currently in the game.

PrivatePassword
  alias: pp
    Sets the password that must be entered for players to join
    a private game.
      e.g. privatepassword supersecret

RemotePassword
  alias: rp
    Sets the password that must be entered for an admin to use
    the remote admin tool (DSRemote.exe).
      e.g. remotepassword reallysecret

RestartMatch
  alias: rsm
    Ends the current match and starts a new match on the same map.
    Note: There is no winner for the round that is currently in
          progress when this command is called.

RestartRound
  alias: rsr
    Ends the current round and starts a new round in the same match,
    on the same map.
    Note: There is no winner for the round that is currently in
          progress when this command is called.

RestartServer
  alias: rss
    Ends the current match and starts a new match on the first map
    in the rotation list.
    Note: There is no winner for the round that is currently in
          progress when this command is called.

RotationList
  alias: rl
    Prints the map rotation list and specifies the current map.

Rounds
  alias: rnds rs
    Sets the number of number rounds that will be played.
      e.g. rounds 7
    Note: With no arguments, the current value is displayed.
          The maximum number of rounds that may be played is
          capped at 99.

RoundTime
  alias: rtime rt
    Sets the time for the round.
    Note: With no arguments, the current value is displayed.
          The maximum time is capped at 59 minutes.

RunMap
  alias: rm
    Ends the current match and starts a new match on the specified
    map.
      e.g. runmap Remagen
    Note: There is no winner for the round that is currently in
          progress when this command is called.

SaveSettings
  alias: ss
    Saves the current server setting as a config file to be used
    upon restart.
   
ShowCompass ( On | Off )
  alias: showcp
    Toggles the display of the compass.
    Note: With no arguments, the current value is displayed.
   
ShowCrosshairs ( On | Off )
  alias: showch
    Toggles the display of the weapon crosshairs.
    Note: With no arguments, the current value is displayed.

ShowEnemyCompassDots ( On | Off )
  alias: showecd
    Toggles the display of the compass dots for the enemies.
    Note: With no arguments, the current value is displayed.

ShowEnemyNames ( On | Off )
  alias: showen
    Toggles the display of the names for the enemies.
    Note: With no arguments, the current value is displayed.

ShowFriendlyCompassDots ( On | Off )
  alias: showfcd
    Toggles the display of the compass dots for your teammates.
    Note: With no arguments, the current value is displayed.

ShowFriendlyNames ( On | Off )
  alias: showfn
    Toggles the display of the names for your teammates.
    Note: With no arguments, the current value is displayed.

ShowGrenadeIndicators ( On | Off )
  alias: showgi
    Toggles the display of the indicators for when a grenade is active.
    Note: With no arguments, the current value is displayed.

ShowHealthBar ( On | Off )
  alias: showhb
    Toggles the display of the health bar.
    Note: With no arguments, the current value is displayed.

ShowHitIndicators ( On | Off )
  alias: showhi
    Toggles the display of the hit indicators when players are shot.
    Note: With no arguments, the current value is displayed.

ShowHUD ( On | Off )
    Toggles the display of the heads-up-display.
    Note: With no arguments, the current value is displayed.

ShowKiller ( On | Off )
  alias: showkl
    Before respawning, displays the player who just killed the player.
    Note: With no arguments, the current value is displayed.

ShowKillerTime
  alias: showkt
    The number of seconds for display that the “ShowKiller” command uses.
    Note: With no arguments, the current value is displayed.

ShowMessageWindow ( On | Off )
  alias: showmw
    Toggles the display of the message window.
    Note: With no arguments, the current value is displayed.

ShowScoreAndTime ( On | Off )
  alias: showst
    Toggles the display of the score and time within the HUD.
    Note: With no arguments, the current value is displayed.

ShowStanceIndicator ( On | Off )
  alias: showsi
    Toggles the display of the stance indicator.
    Note: With no arguments, the current value is displayed.

SpawnPostDelayAllies
  alias: spostal
    Sets the delay time between when a player respawns until the player becomes
    active for Allied player types.
    Note: With no arguments, the current value is displayed.

SpawnPostDelayAxis
  alias: spostax
    Sets the delay time between when a player respawns until the player becomes
    active for Axis player types.
    Note: With no arguments, the current value is displayed.

SpawnPostDelayNonAir
  alias: spostna
    Sets the delay time between when a player respawns until the player becomes
    active for non-airdrop game types.
    Note: With no arguments, the current value is displayed.

SpawnPreDelayAllies
  alias: spreal
    Sets the delay time between when a player dies until the respawn begins
    for Allied player types.
    Note: With no arguments, the current value is displayed.

SpawnPreDelayAxis
  alias: spreax
    Sets the delay time between when a player dies until the respawn begins
    for Axis player types.
  Note: With no arguments, the current value is displayed.

SpawnPreDelayNonAir
  alias: sprena
    Sets the delay time between when a player dies until the respawn begins
    for non-airdrop game types.
  Note: With no arguments, the current value is displayed.

TimeBetweenMatches
  alias: tbm
    Number of seconds to delay between matches.
  Note: With no arguments, the current value is displayed.

TimeBetweenRounds
  alias: tbr
    Number of seconds to delay between rounds.
  Note: With no arguments, the current value is displayed.

TimeLimit
  alias: tl
    Same as the “RoundTIme” command.

Unban
  alias: ub
    Lifts the server ban on the specified player.
      e.g. unban user

UnbanAll
    Lifts the server ban on all players. The internal list of banned
    players is wiped after issuing this command… use with caution,
    there is no undo.

Upgrades ( On | Off )
  alias: up
    Toggles weapon upgrades.
    Note: With no arguments, the current value is displayed.

VoiceCommands ( On | Off )
  alias: voice
    Toggles the display of display of voice commands within the
    chat window.
  Note: With no arguments, the current value is displayed.

WeaponDrop ( On | Off )
  alias: wd
    Toggle for the dropping of weapons upon player death.
  Note: With no arguments, the current value is displayed.

WeaponTracers ( On | Off )
  alias: tracers
    Toggles the display of tracers when weapons are fired.
  Note: With no arguments, the current value is displayed.

WelcomeMessage
  alias: wm
    Same as the “MessageOfTheDay” command.

VII. Credits
===========================================================================

The dedicated server team consisted of the following…

Project Manager: Matt Sentell
Project Lead:    Tom McDevitt
Engineering:    Torin Kampa, Kwasi Mensah, Kinshuk Mishra, Giray Ozil
Linux development: Ryan C. Gordon

VIII. HOW TO FIND FURTHER HELP AND REPORT BUGS.
===========================================================================

First, thank you for reading this entire document before seeking assistance.

Bug reports for the dedicated server, including malfunctions and crashes
can be reported here:

    http://bugzilla.icculus.org/

If you want to discuss server administration, including operation, tweaking,
and troubleshooting, a lively community of admins (and some original
Airborne development staff) are available via a mailing list. To join the
list, send a blank email to [email protected]

Jedini moha direktorijum(koji sadrzi ime moha) je:

file:///mnt/home/tomato/extract/airborne-linux-server/UnrealEngine3/MOHAGame

Mozda sam trebao nekakvu predradnju
da obavim,mislim stvarno ne mogu da se snadjem.

[dukenukem_4d]

e gledaj moraš prvo da instaliraš igricu Mohaa 🙂
http://icculus.org/~ravage/mohaa/
pomoću ovog instalera 15MB,(on u toku instalacije traži cd-ove,ako ne može da ih vidi ,znam
otprilike kako da se prevaziđe,samo da se prisetim)

pa onda ,verovatno u /usr/local/games/mohaa da se raspakuje ovaj airborne.tar.gz
(ili možeš u home ,što je bolje, da mu staviš instalaciju ,da ne bi tražio root privilegie 😀 )
/home/tomato/mohaa
i zauzme oko 1GB ,mislim.. plus koliko je airborne veliki

ali ,ovo je dedicted server ,nisom siguran da može da se igra sa tog istog računara ???
već samo sa klijenata prikačenih na lokalnoj mreži (LAN) ili ako se pristupa sa interneta.

EDIT: nego čekaj možda sam se malo zyhebo ,
ako je ovaj Airborne potpuno druga igrica a nije mohaaa, ???
http://icculus.org/news/news.php?id=4088
ovde za verziju 1.2
http://icculus.org/news/news.php?id=4365

EDIT: precrtao sam ono što niej za Airborne O0

[dukenukem_4d]

jesam  ,zyhebo sam se 😀

piše ovde u delu: III Setup

1.da se instalira igra (moh: Airborne) ali na vindouz
2.da se bar jednom pušti u dedicated server modu na vindouzu ,da bi generisao ini datoteke
(ovde su neke podopcije,pa da se zatvori prozor da bi ih snimio)

3. da se uploaduje ceo Program Files/Electronic Arts/Medal of Honor
   Airborne na taj hosting server
(ili u ovom slušaju da se iskopira na linuks particiju  7.5 GBajta 😮
eventualno bi moglo da se symlinkuje ,verovatno komplikovano)
-bez razmaka u imenu npr /home/tomato/moh-airborne

4 ,5 da se otpakuje
  tar -xjvvf airborne-linux-server-VERSION.tar.bz2
  i iskopira na pravilno mesto ???

(6 )PunkBuster: nije neophodan

pa onda  IV. Running the server ? tako nekako 😀

[Anonimni]

@duke
Hvala na trudu i ovako iscrpnom objasnjenju.
Kopiranje ovih 7.5 GB je narocito nezahvalan posao.
Izvini na maltretiranju, videcu sta cu dalje  :redface:.
Prilicno je zahtevna priprema za igranje ove igre.
Hvala jos jednom!

[Autor]

Članci