- This topic has 61 odgovor, 7 glasova, and was last updated 18 years, 11 months ranije by
.
-
Članci
-
verovatno mislim da nemas posebno mreznu?
ovaj drajver kreira virtuelnu mreznu (tako bar kazu ) i nazove je po redu
znaci ako nemas na kompjuteru uopste mreznu onda je eth0
ako imas neku ,onda su eth0 i eth1Joj pa imam al meni preko jutra ne stvori tu drugu virtuelnu ko tom liku sto je to pisao!
onda mu verovatno ipak treba br2364
smo sto ja vise ne vidim na oci nista,i cu kolabiram od umor
moram da idem da spavamE ovako:
[glow=red,2,300]1.[/glow] On sam napravi 2 konekcije : eth0 i unknown (sit0)
[glow=red,2,300]2.[/glow] Probao sam da mu operisem direktno config fajl kao root ali ni to nije uspelo na kraju je vratilo sve na 0
[glow=red,2,300]3.[/glow] Evo i svega sto izbaci u eaglectrl
[root@localhost ~]# eaglectrl
Usage: eaglectrl [-h|–help] [-v|–version]
[-o|–options [file]] [-d|–dsp [file]] [-i|–if]
[-s|–sync [sec]] [-p|–print] [-w|–wizard]
[-g|–get-debug] [-x|–set-debug debug-mask]
[-c|–cmvs file] [-l|–list-debug]
-h|–help : display this help
-v|–version : display version number
-o|–options [file] : set options file
(file defaults to /etc/eagle-usb/eagle-usb.conf)
-c|–cmvs [file] : set CMVs file (autodetected)
-d|–dsp [path] : send Options, CMVS, and DSP file
path is either a path to the DSP file or to a directory
containing DSP files for ISDN and POTS. In this case eaglectrl
will choose which file to send to modem depending on the modem
type. Defaults to /lib/eagle-usb/dsp
-i|–if : print modem interface name
-s|–sync [sec] : wait sec seconds for modem to be operational.
If sec is 0 wait until synchro happens (infinite).
Default is 60
-p|–print : display detected devices
-w|–wizard : wizard mode. Works if you have ONLY 1 eagle modem
plugged in. Choose itself sequence to send to
modem (firmware/DSP ..)
NOTE: You can use it in conjunction with -o,
-d and -s to specify the options file,
DSP file and synchro timeout values to use.
-g|–get-debug : Get debug mask
-x|–set-debug dbg : Set driver debug-mask to the given value,
which can either be an hexadecimal number (0x0, 0xFF)
or a list of debug flags separated by a comma. A list of
available flags can be given by the –list-debug option.
-l|–list-debug : Display a list of available flags for the debug-mask.[root@localhost ~]# eaglectrl -p
Post-firmware device on USB bus 4 (type=POTS)
[root@localhost ~]# eaglectrl -d
CMVs successfully sent to driver.
Unable to send options to driver: Device or resource busy
[root@localhost ~]# eaglectrl -i
eth0
[root@localhost ~]# eaglectrl -c
eaglectrl: invalid option — c
[root@localhost ~]# eaglectrl -lAvailable debug flags:
SAR Segmentation and Reassembly subsystem
UNI User-Network Inferface subsystem
MPOA Multi-Protocol Over ATM subsystem
INIT Initialization subsystem
ENET Ethernet subsystem
BOOT Boot subsystem
UTILS Utils subsystem
MSG Messages subsystem
SM State Machine subsystem
READ Read-side subsystem
INTS Interrupts subsystem
CRC CRC subsystem
DSP DSP subsystem
OAM OAM subsystem
ROUTEDIP Routed-Ip subsystem[glow=red,2,300]4.[/glow] U expert config izbaci sve isto kao i obicno :
[root@localhost ~]# eagleconfig -e==============================================================================
============================= ADSL Configuration =============================
==============================================================================
Your modem has to be plugged before proceeding.
You can stop this script anytime with [Ctrl][c]Choose a network configuration :
_______________________________________________________________________
. . . Country. . . Network. . . . . . . . . VPI VCI ENC
———————————————————————–
DZ01 : Algeria Wanadoo 00 23 01 ????
AR01 : Argentina Speedy 08 23 01 ????
AU01 : Australia Arachnet 08 23 06 ????
AU03 : Australia Speedstream Off net 08 23 01 ????
AU02 : Australia Speedstream On net 08 22 06 ????
AT01 : Austria AON 01 20 06 ????
AT00 : Austria Any 08 30 06 ????
AT02 : Austria Telstra 08 23 01 ????
BE04 : Belgium ADSL Office 08 23 03 ????
BE03 : Belgium Belgacom 08 23 06 ????
BE01 : Belgium Tiscali BE 08 23 06 ????
BE02 : Belgium Turboline 08 23 05 ????
BR04 : Brazil Rio Grande do Sul (RS) 01 20 01 ????
BR01 : Brazil Speedy/Telefonica 08 23 01 ????
BR03 : Brazil Turbo/Brasil Telecom 00 23 01 ????
BR02 : Brazil Velox/Telemar 00 21 01 ????
BG02 : Bulgaria BTK ISDN 01 20 01 ????
BG01 : Bulgaria BTK POTS 00 23 01 ????
CN01 : China China Netcom 00 23 03 ????
CN02 : China China Netcom 08 23 03 ????
CN03 : China China Netcom 08 23 03 ????
CN13 : China China Netcom 00 23 03 ????
CN04 : China China Netcom 00 27 03 ????
CN05 : China China Netcom 00 20 03 ????
CN06 : China China Netcom 00 23 03 ????
CN07 : China China Netcom 08 23 03 ????
CN08 : China China Telecom 00 23 03 ????
CN09 : China China Telecom 00 200 03 ????
CN10 : China China Telecom 00 23 03 ????
CN11 : China China Telecom 08 20 03 ????
CN12 : China China Telecom 00 20 03 ????
CN14 : China China Telecom 08 23 03 ????
CN15 : China China Telecom 08 51 03 ????
CN16 : China China Telecom 08 23 03 ????
CN17 : China China Telecom 00 20 03 ????
CN18 : China China Telecom 00 20 03 ????
CN19 : China China Telecom 00 23 03 ????
CN20 : China China Telecom 00 23 03 ????
CZ01 : Czech Repub Cesky Telecom 08 48 06 ????
DK01 : Denmark Any 00 65 03 ????
DK02 : Denmark Cybercity 00 23 06 ????
DK03 : Denmark Tiscali 00 23 06 ????
EG01 : Egypt Raya Telecom 08 50 06 ????
FI01 : Finland Sonera 00 64 03 ????
FR10 : France Cegetel ADSL Max 8 Mb 08 23 06 ????
FR08 : France Cegetel non dégroupé 51 08 23 06 ????
FR06 : France Club-Internet 08 23 06 ????
FR04 : France Free dégroupé 1024/256 08 24 04 ????
FR01 : France Free non dégroupé 512/1 08 23 06 ????
FR11 : France Free non dégroupé ADSL 08 23 06 ????
FR03 : France Tiscali.fr 128k 08 23 05 ????
FR07 : France Tiscali.fr 512k 08 23 06 ????
FR02 : France Télé2 08 23 06 ????
FR09 : France Wanadoo 08 23 06 ????
FR05 : France n9uf tel9com 512 & dégr 08 23 06 ????
DE02 : Germany 1&1 01 20 01 ????
DE01 : Germany Deutsche Telekom (DT) 01 20 01 ????
GR01 : Greece Any 08 23 06 ????
HU01 : Hungary Matav 01 20 01 ????
IS01 : Iceland Islandssimi 00 23 06 ????
IS02 : Iceland Landssimi 08 30 06 ????
IN01 : India Any 00 20 06 ????
IE01 : Ireland Any 08 23 01 ????
IL01 : Israel Bezeq 08 30 06 ????
IT04 : Italy Libero.it 08 23 06 ????
IT01 : Italy Telecom Italia 08 23 06 ????
IT02 : Italy Telecom Italia/Office U 08 23 03 ????
IT03 : Italy Tiscali.it, Alice 08 23 06 ????
LT01 : Lithuania Lietuvos Telekomas 08 23 01 ????
MU02 : Mauritius Telecom Plus (Mauritius 08 23 06 ????
MU01 : Mauritius wanadoo.mu 08 23 06 ????
MA01 : Morocco Maroc Telecom 08 23 06 ????
NL02 : Netherlands Eager Telecom 00 21 03 ????
NL01 : Netherlands KPN 08 30 06 ????
NL03 : Netherlands Tiscali 00 22 03 ????
NL04 : Netherlands Versatel 00 20 03 ????
PL02 : Poland Netia neostrada 08 23 01 ????
PL01 : Poland Telekomunikacja Polska 00 23 06 ????
PT01 : Portugal PT 00 23 01 ????
RU01 : Russia MTU-Intel 01 32 01 ????
SG01 : Singapore Singnet 00 64 06 ????
SL01 : Slovenia SiOL 01 20 01 ????
ES07 : Spain Arrakis 00 23 06 ????
ES14 : Spain Arsys 01 21 01 ????
ES08 : Spain Auna 00 23 06 ????
ES09 : Spain Communitel 00 21 06 ????
ES10 : Spain Euskatel 08 20 01 ????
ES01 : Spain Telefónica IP dinámica 08 20 01 ????
ES02 : Spain Telefónica ip fija 08 20 03 ????
ES15 : Spain Terra 08 20 06 ????
ES06 : Spain Tiscali 01 20 06 ????
ES11 : Spain Uni2 01 21 06 ????
ES04 : Spain Wanadoo PPPoE 08 20 01 ????
ES05 : Spain Wanadoo ip fija 08 20 03 ????
ES03 : Spain Wanadoo/Eresmas Retevis 08 23 06 ????
ES12 : Spain Ya.com PPPoE 08 20 01 ????
ES13 : Spain Ya.com static 08 20 03 ????
LK01 : Sri Lanka Srilanka Telecom 08 23 06 ????
SE01 : Sweden Telia 08 23 03 ????
CH01 : Switzerland Any 08 23 03 ????
CH02 : Switzerland BlueWin / Swisscom 08 23 05 ????
CH03 : Switzerland VTX Datacomm (ex-Tiscal 08 23 01 ????
TH01 : Thailand Asianet 00 64 01 ????
TU01 : Tunisia Planet.tn 00 23 05 ????
AE01 : United Arab Etisalat 00 32 05 ????
UK02 : United King British Telecom 00 26 06 ????
UK01 : United King Tiscali UK 00 26 06 ????
———————————————————————–
?[NL02]LT01A login and password have been found in ppp configuration file.
Do you want to keep this login/password? [y]/nyDo you want then DNS list to be automaticaly updated ? [y]/ny
Do you want the connection to automaticaly be started at boot? y/[n]n
Do you want to enable a ‘cron’ task to control connection every 2 minutes
and restart it when it is lost ? y/[n]nYou may enter a virtual interface name for the modem. To let the
kernel determine automatically the name, enter “auto” :
[auto]
error reading information on service eagle-usb: No such file or directory
Loading module… [ OK ]Loading DSP & options… [ OK ]
Waiting for modem to be operational… [ Error ]
[root@localhost ~]# startadslModem is not operational!
Check eaglestat result to know its state!iako ovo apsurdno zvuci ,izgleda da prava mrezna nije prepoznata na linuxu
00:15:F2:4D:11:EE je kod za ausov uradjaj,a to je usb modem?
jedino ako je i prava mrezna na tvom kompjuteru asusova?znaci ipak je eth0
ovde su neki firmveri,jedino ako i oni trebaju
http://eagle-usb.org/ueagle-atm/non-free/
http://eagle-usb.org/ueagle-atm/non-free/ueagle-data-1.1.tar.gz
http://eagle-usb.org/ueagle-atm/non-free/ueagle-data-1.0.tar.gzovaj ueagle-data-1.1.tar.gz
ako treba da se ubace u odredjeni folder npr.
/lib/firmware/ueagle-atm (kao root)
ili je neki drugi folder,ne znam trenutnonaime ima rpm za mandrivu ali samo preko mandriva-club-a 😆
pre statadsl treba ono
eaglectrl -d -w -iEDIT:uputstvo za instalaciju firmware(engl)
http://atm.eagle-usb.org/wakka.php?wiki=UeagleAtmDoc
izuzev ako je ovo zadnje za ueagle-atm modul?Evo odradio sam to prema onom upustvu ali :'(
Try to load the ueagle-atm module and see what happens:
$ modprobe ueagle-atm* “FATAL: module ueagle-atm not found”
A onda ono dalje ne radi!
gledaj,izgleda da sam te zabunio
problem je u tome sto ima dva razlicita drajvera [blue]eagle-usb[/blue]
i [blue]ueagle-atm[/blue]
kada otkucas u konzoli kao root
modinfo eagle-usb
treba da napise informaciju o tom drajveru
ono zadnje uputstvo je bilo za ueagle-atm drajver(ono pre sa paketima smo radili da ne bismo ovaj ueagle-atm trebali da kompiliramo)
a izgleda da je problem nesto u unosu onih parametara
ali ako si isao po uputstvu nadam se da nisi obrisao eagle-usb.ko ?
jer ce to da trebada li mozes da opet ubacis listinge ako ga jos ima eagle-usb.ko ?
lsmod
lsusb
lspcidmesg | grep usb
dmesg | grep eagle(na primer snimljene datoteke napravis kao prilog u postu) na dodatne opcije ,pa prilozi
Pokusao sam sa mandrivom 2007 spring cak ima da se podesi VCI i VPI, ali nece! Ovo bi u sustini trebalo biti sve to mislim pa pogledaj amedyn-2004-08-04. Evo i sta si trazio :
mislim da ima nade i ovako
vidi sta je dala pretraga sajta linuxo 🙂
http://www.linuxo.net/forum/index.php/topic,5935.msg37612.html#msg37612samo da se vidi sta je Žarko napravio..(nije bas detaljno)
treba nesto po menijima da se ide u mandrivinom kontrolnom centruedit: zaboravio sam ,ovi logovi izgledaju dobro tj
na kraju kaze:
[eagle-usb] Modem operational !!
[eagle-usb] Ethernet device eth0 created.
(trebalo bi da radi nekako)edit2:ovde je sa mandriva foruma kako su podesavali sagem (nije uputstvo red po red)
http://forum.mandriva.com/viewtopic.php?t=48019&highlight=sagem+800
Moraš biti prijavljen da bi postavio komentar u ovoj temi.