Rezultati pretrage za 'php'

[kmilos]

Kao sto cenjene kolege kazu, slaba vajda od USB modema na Linux-u.
Ali postoji mala verovtanoca da radi, moraces samo prvo da identifikujes cipset. Program scanModem to odradi za tebe, i ako je cipset podrzan, predlozi i drajver:

http://linmodems.technion.ac.il/

Pogledaj takodje slicnu temu koja je bila skoro:

http://www.linuxo.org/modules.php?name=Forums&file=viewtopic&t=4314

(Mali savet usput: molim te uvek prvo pretrazi forum pre postavljanja pitanja jer moze da se desi da je neko vec imao slican problem, preglednije je da se sve povezane stvari diskutuju na jednom mestu.)

[ivasic]

Gled, ja recimo nikad nisam praktikovao da u isto vreme radi i TV i monitor tako da u tom slucaju imas 2 varijante :
1. Pogledaj ovaj divan tutorial i sve ce ti se samo kasti : http://www.gmpf.de/index.php/NVidia:TV-OUT
2. Druga varijanta : dodaj u xorg.conf (od onog dela gde si planirao TWIN VIEW) ovo:
[code]# Option “Twinview” “TRUE”
# Option “TwinViewOrientation” “Clone”
# Option “SecondMonitorHorizSync” “30-70”
# Option “SecondMonitorVertRefresh” “60”
# Option “MetaModes” “1280×1024, 800×600; 1024×768 , 800×600”
# Option “ConnectedMonitor” “TV”
# Option “TVStandard” “PAL-B”[/code]Ovako kako je radice ti monitor. Kad hoces tvout skloni ‘#’ za komentar, sacuvaj i startuj novu sesiju (StartMeni->Switch User->Start New Session) i pojavice ti se slika na TV-u. Setas se izmedju monitora i TV-a sa CTRL+ALT+F7 i CTRL+ALT+F8. Posle izgasi sesiju gde je TV i vrati komentare u xf86. Jes’ malo dosadno al’ ako te ne mrzi mozes da napises i skriptu koja automatski postavlja/sklanja te komentare i eto ti resenja 😉

Pozdrav i javi sta si uradio.

[mtm76]

moguća riješenja tvog problema 😉
Evo ti moj xorg.conf (sa Slack-a), samo pazi na max rezoluciju (postavljena je na 1280×1240@85Hz)
[code]# **********************************************************************
# DRI Section
# **********************************************************************
Section “dri”
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection

# **********************************************************************
# Module section — this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section “Module”

# This loads the DBE extension module.

Load “dbe” # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection “extmod”
Option “omit xfree86-dga” # don’t initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load “type1”
Load “freetype”

# This loads the GLX module
Load “glx” # libglx.a
Load “dri” # libdri.a

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section “Files”

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like “.txt” or “.db”). There is normally
# no need to change the default.

RgbPath “/usr/X11R6/lib/X11/rgb”

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don’t have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

FontPath “/usr/X11R6/lib/X11/fonts/local/”
FontPath “/usr/X11R6/lib/X11/fonts/misc/”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi/:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi/:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/Type1/”
FontPath “/usr/X11R6/lib/X11/fonts/Speedo/”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi/”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi/”

# The module search path. The default path is shown here.

# ModulePath “/usr/X11R6/lib/modules”

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section “ServerFlags”

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option “NoTrapSignals”

# Uncomment this to disable the server abort sequence
# This allows clients to receive this key event.

# Option “DontZap”

# Uncomment this to disable the / mode switching
# sequences. This allows clients to receive these key events.

# Option “Dont Zoom”

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option “DisableVidModeExtension”

# Uncomment this to enable the use of a non-local xvidtune client.

# Option “AllowNonLocalXvidtune”

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option “DisableModInDev”

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option “AllowNonLocalModInDev”

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard’s InputDevice section
# **********************************************************************

Section “InputDevice”

Identifier “Keyboard1”
Driver “kbd”
# For most OSs the protocol can be omitted (it defaults to “Standard”).
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option “Protocol” “Xqueue”

Option “AutoRepeat” “500 30”

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option “Xleds” “1 2 3”

# Option “LeftAlt” “Meta”
# Option “RightAlt” “ModeShift”

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option “XkbModel” “pc102”
# If you have a US Microsoft Natural keyboard, you can use:
# Option “XkbModel” “microsoft”
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option “XkbLayout” “de”
# or:
# Option “XkbLayout” “de”
# Option “XkbVariant” “nodeadkeys”
#
# If you’d like to switch the positions of your capslock and
# control keys, use:
# Option “XkbOptions” “ctrl:swapcaps”

# These are the default XKB settings for XFree86
# Option “XkbRules” “xfree86”
# Option “XkbModel” “pc101”
# Option “XkbLayout” “us”
# Option “XkbVariant” “”
# Option “XkbOptions” “”

# Option “XkbDisable”

Option “XkbRules” “xfree86”
Option “XkbModel” “pc104”
Option “XkbLayout” “bs”

EndSection

# **********************************************************************
# Core Pointer’s InputDevice section
# **********************************************************************

Section “InputDevice”

# Identifier and driver

Identifier “Mouse1”
Driver “mouse”
Option “Protocol” “ImPS/2”
Option “ZAxisMapping” “4 5”
Option “Device” “/dev/mouse”

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option “Protocol” “Xqueue”

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option “BaudRate” “9600”
# Option “SampleRate” “150”

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option “Emulate3Buttons”
# Option “Emulate3Timeout” “50”

# ChordMiddle is an option for some 3-button Logitech mice

# Option “ChordMiddle”

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section “InputDevice”
# Identifier “Mouse2”
# Driver “mouse”
# Option “Protocol” “MouseMan”
# Option “Device” “/dev/mouse2”
# EndSection
#
# Section “InputDevice”
# Identifier “spaceball”
# Driver “magellan”
# Option “Device” “/dev/cua0”
# EndSection
#
# Section “InputDevice”
# Identifier “spaceball2”
# Driver “spaceorb”
# Option “Device” “/dev/cua0”
# EndSection
#
# Section “InputDevice”
# Identifier “touchscreen0”
#
Driver “microtouch”
# Option “Device” “/dev/ttyS0”
# Option “MinX” “1412”
# Option “MaxX” “15184”
# Option “MinY” “15372”
# Option “MaxY” “1230”
# Option “ScreenNumber” “0”
# Option “ReportingMode” “Scaled”
# Option “ButtonNumber” “1”
# Option “SendCoreEvents”
# EndSection
#
# Section “InputDevice”
# Identifier “touchscreen1”
# Driver “elo2300”
# Option “Device” “/dev/ttyS0”
# Option “MinX” “231”
# Option “MaxX” “3868”
# Option “MinY” “3858”
# Option “MaxY” “272”
# Option “ScreenNumber” “0”
# Option “ReportingMode” “Scaled”
# Option “ButtonThreshold” “17”
# Option “ButtonNumber” “1”
# Option “SendCoreEvents”
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section “Monitor”
Identifier “Monitor0”
HorizSync 31.5 – 91.1
VertRefresh 60 – 85
Option “DPMS”

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline “640×480@100” 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline “800×600@100” 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline “1024×768@100” 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152×864 @ 60Hz
# Modeline “1152×864@60” 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152×864 @ 85Hz
# Modeline “1152×864@85” 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152×864 @ 100Hz
# Modeline “1152×864@100” 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280×960 @ 75Hz
# Modeline “1280×960@75” 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280×960 @ 100Hz
# Modeline “1280×960@100” 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline “1280×1024@100” 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280×1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline “GDM-1950” 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600×1000 @ 60Hz
# Modeline “1600×1000” 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600×1000 @ 75Hz
# Modeline “1600×1000” 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600×1000 @ 85Hz
# Modeline “1600×1000” 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600×1000 @ 100Hz
# Modeline “1600×1000” 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600×1024 @ 60Hz
# Modeline “1600×1024” 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600×1024 @ 75Hz
# Modeline “1600×1024” 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600×1024 @ 76Hz
# Modeline “1600×1024” 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600×1024 @ 85Hz
# Modeline “1600×1024” 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920×1080 @ 60Hz
# Modeline “1920×1080” 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920×1080 @ 75Hz
# Modeline “1920×1080” 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920×1200 @ 60Hz
# Modeline “1920×1200” 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920×1200 @ 75Hz
# Modeline “1920×1200” 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048×1536 @ 60
# Modeline “2048×1536” 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048×1536 @ 60
# Modeline “2048×1536” 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400×1050 @ 60Hz M9 Laptop mode
# ModeLine “1400×1050” 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920×2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline “1920×2400@25” 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920×2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline “1920×2400@30” 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section “Device”
Identifier “Standard VGA”
VendorName “Unknown”
BoardName “Unknown”

# The chipset line is optional in most cases. It can be used to override
# the driver’s chipset detection, and should not normally be specified.

# Chipset “generic”

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver “vga”
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn’t present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.

# BusID “PCI:0:10:0”

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section “Device”
Identifier “ATI Graphics Adapter”
Driver “fglrx”
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option “NoDDC”
# === disable/enable XAA/DRI ===
Option “no_accel” “no”
Option “no_dri” “no”
# === misc DRI settings ===
Option “mtrr” “off” # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option “DesktopSetup” “0x00000000”
Option “MonitorLayout” “AUTO, AUTO”
Option “IgnoreEDID” “off”
Option “HSync2” “unspecified”
Option “VRefresh2” “unspecified”
Option “ScreenOverlap” “0”
# === TV-out Management ===
Option “NoTV” “yes”
Option “TVStandard” “NTSC-M”
Option “TVHSizeAdj” “0”
Option “TVVSizeAdj” “0”
Option “TVHPosAdj” “0”
Option “TVVPosAdj” “0”
Option “TVHStartAdj” “0”
Option “TVColorAdj” “0”
Option “GammaCorrectionI” “0x06419064”
Option “GammaCorrectionII” “0x00000000”
# === OpenGL specific profiles/settings ===
Option “Capabilities” “0x00000000”
# === Video Overlay for the Xv extension ===
Option “VideoOverlay” “on”
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option “OpenGLOverlay” “off”
# === Center Mode (Laptops only) ===
Option “CenterMode” “off”
# === Pseudo Color Visuals (8-bit visuals) ===
Option “PseudoColorVisuals” “off”
# === QBS Management ===
Option “Stereo” “off”
Option “StereoSyncEnable” “1”
# === FSAA Management ===
Option “FSAAEnable” “no”
Option “FSAAScale” “1”
Option “FSAADisableGamma” “yes”
Option “FSAACustomizeMSPos” “no”
Option “FSAAMSPosX0”
“0.000000”
Option “FSAAMSPosY0” “0.000000”
Option “FSAAMSPosX1” “0.000000”
Option “FSAAMSPosY1” “0.000000”
Option “FSAAMSPosX2” “0.000000”
Option “FSAAMSPosY2” “0.000000”
Option “FSAAMSPosX3” “0.000000”
Option “FSAAMSPosY3” “0.000000”
Option “FSAAMSPosX4” “0.000000”
Option “FSAAMSPosY4” “0.000000”
Option “FSAAMSPosX5” “0.000000”
Option “FSAAMSPosY5” “0.000000”
# === Misc Options ===
Option “UseFastTLS” “0”
Option “BlockSignalsOnLock” “on”
Option “UseInternalAGPGART” “yes”
Option “ForceGenericCPU” “no”
BusID “PCI:1:0:0” # vendor=1002, device=4150
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the “-screen”
# option.
Section “Screen”
Identifier “Screen0”
Device “ATI Graphics Adapter”
Monitor “Monitor0”
DefaultDepth 24
#Option “backingstore”

Subsection “Display”
Depth 24
Modes “1280×1024” “1024×768” “800×600” “640×480”
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# “-layout” option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section “ServerLayout”

# The Identifier line must be present
Identifier “Server Layout”

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

Screen “Screen0”

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include “CorePointer”, “CoreKeyboard” and
# “SendCoreEvents”.

InputDevice “Mouse1” “CorePointer”
InputDevice “Keyboard1” “CoreKeyboard”

EndSection

### EOF ###[/code]

ako ni tada neće, moguće je da nisi kompajlirao modul… ovo mislim na Slack (a važi i za ostale)… znači moraš ručno pokrenutu skirpte make.sh i make_install.sh
o time više na
http://www.linuxo.org/modules.php?name=Forums&file=viewtopic&t=4290&highlight=fglrxconfig
obrati pažnju da u fstab-u moraš imati i liniju
tmpfs /dev/shm tmpfs defaults 0 0
ako ti ni poslije toga neće da radi, onda, nažalost tvoja kartica nije podržana. (naravno probaj modprobe fglrx, čisto da vidiš da li ti se kompajlirao taj modul), i svakoko moraš imati instaliran kernel source (mogu i header-i)

[daniel1988]

Hteo sam da mountuje USB flash drive ali cvrc.
Izguglao neshto sa linuxquestions.org (i izgleda delimichno uprskao stvar)
http://www.linuxquestions.org/questions/showthread.php?s=&threadid=335797

fstab izgleda ovako: (deo)
/dev/sda1 /mnt/usb auto rw,user,uid=1002,gid=0,umask=037 0 0

Evo svega iz konole shta sam radio:

root@survivor:/home/survivor# mount /dev/sda1
mount: special device /dev/sda1 does not exist
root@survivor:/home/survivor# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 058f:9380 Alcor Micro Corp. USB Flash drive
Bus 001 Device 001: ID 0000:0000
root@survivor:/home/survivor# # mount -t usbfs none /proc/bus/usb
root@survivor:/home/survivor# mount /dev/sda1
mount: special device /dev/sda1 does not exist
root@survivor:/home/survivor# none on /proc/bus/usb type usbfs (rw)
bash: syntax error near unexpected token `(‘
root@survivor:/home/survivor# none on /proc/bus/usb type usbfs
bash: none: command not found
root@survivor:/home/survivor# none on /proc/bus/usb
bash: none: command not found
root@survivor:/home/survivor# mount none on /proc/bus/usb type usbfs (rw)
bash: syntax error near unexpected token `(‘
root@survivor:/home/survivor# mount none on /proc/bus/usb type usbfs
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere’.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] … : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount –bind olddir newdir
or move a subtree:
mount –move olddir newdir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@survivor:/home/survivor# mount device usb
mount: mount point usb does not exist
root@survivor:/home/survivor# mkdir /mnt/usb
root@survivor:/home/survivor# mount /dev/sda1
mount: special device /dev/sda1 does not exist
root@survivor:/home/survivor# mount /dev/sdb1
mount: special device /dev/sdb1 does not exist
root@survivor:/home/survivor# mount /dev/sd
mount: can’t find /dev/sd in /etc/fstab or /etc/mtab
root@survivor:/home/survivor# mount /dev/sda1
mount: special device /dev/sda1 does not exist
root@survivor:/home/survivor# mount -t usbfs none /proc/bus/usb
mount: none already mounted or /proc/bus/usb busy
mount: according to mtab, usbfs is already mounted on /proc/bus/usb
root@survivor:/home/survivor# mount /proc/bus/usb type usbfs (rw)
bash: syntax error near unexpected token `(‘
root@survivor:/home/survivor# ls -l /proc/bus/usb
total 0
dr-xr-xr-x 2 root root 0 2005-07-11 18:29 001
dr-xr-xr-x 2 root root 0 2005-07-11 18:29 002
-r–r–r– 1 root root 0 2005-07-11 23:30 devices
root@survivor:/home/survivor# less /proc/scsi/usb-storage-0/1
/proc/scsi/usb-storage-0/1: No such file or directory
root@survivor:/home/survivor# mkdir -m 777 /mnt/usb
root@survivor:/home/survivor# mount -t vfat /dev/sda1 /mnt/usb
mount: special device /dev/sda1 does not exist
root@survivor:/home/survivor# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 058f:9380 Alcor Micro Corp. USB Flash drive
Bus 001 Device 001: ID 0000:0000
root@survivor:/home/survivor# mknod -m 666 /dev/sda b 8 0
root@survivor:/home/survivor# mknod -m 666 /dev/sda1 b 8 0
root@survivor:/home/survivor# mount -t vfat /dev/sda1 /mnt/hd
mount: /dev/sda1 is not a valid block device
root@survivor:/home/survivor# mkfs /dev/sda1
mke2fs 1.35 (28-Feb-2004)
/dev/sda1 is entire device, not just one partition!
Proceed anyway? (y,n) n
root@survivor:/home/survivor# mkdosfs -F 32 /dev/sda1
mkdosfs 2.10 (22 Sep 2003)
/dev/sda1: No such device or address
root@survivor:/home/survivor# t was it . Now I can mount it again the normal way:
bash: t: command not found
root@survivor:/home/survivor# mkdosfs -F 32 /dev/sda1
mkdosfs 2.10 (22 Sep 2003)
/dev/sda1: No such device or address
root@survivor:/home/survivor# mknod -m 666 /dev/sda1 b 8 0
mknod: `/dev/sda1’: File exists
root@survivor:/home/survivor# mkdosfs -F 32 /dev/sda1
mkdosfs 2.10 (22 Sep 2003)
/dev/sda1: No such device or address
root@survivor:/home/survivor# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 058f:9380 Alcor Micro Corp. USB Flash drive
Bus 001 Device 001: ID 0000:0000
root@survivor:/home/survivor# ls -l /proc/bus/usb
total 0
dr-xr-xr-x 2 root root 0 2005-07-11 18:29 001
dr-xr-xr-x 2 root root 0 2005-07-11 18:29 002
-r–r–r– 1 root root 0 2005-07-11 23:30 devices
root@survivor:/home/survivor# mount /dev/sda1
mount: /dev/sda1 is not a valid block device
root@survivor:/home/survivor#

Znachi prvo mi napishe:
mount: special device /dev/sda1 does not exist
a posle
mount: /dev/sda1 is not a valid block device

kako da sredim ovo?

[jovir]

Pitanje je da li je neko napravio kakav programčić u linuxu za bržu promenu FourCC.

Pronašao gfourcc i cfourcc:
http://sarovar.org/project/showfiles.php?group_id=246&release_id=434

[worky]

U horoskopu sam pingvin 🙂

[brale]

Evo ako neko voli sarene lilo splash-eve

ima ovde svasta
http://www.73lab.com/index.php?menu_item=11&curr_lang=1

naravno uz konsultaciju man lilo

[daniel1988]

Rekompajlirao sam kerel, radi k’o sat.

@LYb: evo greshe ovde, da ne postavljam na 2 mesta

Windows registry VS KDE ???

pod brojem 4 je

[kmilos]

http://www1.mandrivalinux.com/en/ftp.php3

Link koji je skroz dole desno u tabeli ti daje spisak mirror-a (javascript je u pitanju, inace bih ti dao direktan link). Nadam se da je to ono sto ti treba.

[Nightweaver]

To je sve lepo. I Dreamweaver radi isto to pa ljudi i dalje imaju maniju da koriste [code][/code] kada hoce da im TXT bude na sredini ili [code][/code] ako zele da im bude bold. Takvi programi od ljudi prave lenjivce. Ja sam PHP tj dinamicni sadrzaj samo pomenuo. Kada sam govorio o razdvajanju HTML i dizajna i mislio sam na staticni sadrzaj. DW, Nvu i sl. “web dizajnera” uopste ne uce metodologiji pravljenja sajta “vec sklopi kako sklopis pa ako radi radi”.:)