- This topic has 13 odgovora, 2 glasa, and was last updated 21 years, 8 months ranije by
.
-
Članci
-
Je li neko nakada probao da instalira ovako nesto, ceo dan trazim na internetu i nikako da podesim. Finta je sto nemam windows a nikako da ga podesim na Gentoo-u a “volja mi” da vidim kako sve to radi. Naravno sve zasta mi treba je crtanje, dakle vucenje po podlozi, levi i desni taster misa
Haloo!!! Bas u pravi chas, kad treba da svrnem kod ortaka po pomenutu skalameriju.
Posto verujem da delimo isti USB problem, mislim da imam nesto kao resenje, posto Genius zvanicno ne podrzava USB tablet za linux, a negde ovde u davna pradavna vremena i ja sam kukao o istom problemu i od nekog dobio patch za kernel i KDE, koji je valjda modifikovani sa RS232 tablet-a, a tada, pa ni do sad nisam nesto mnogo patchovao (a tad nisam znao ni da postoji komanda za to), ako hoces mogu ti poslati fajl na mail, ali pod jednim malim uslovom: da u tips & tricks ostavis poblize uputstvo kako si to uradio, a vidim te na svim forumima, nosis i mnogo cvaraka nad avatarom, pa ako ovaj file vredi nesto, onda mozda i mozes da ispunis uslov.
Mozemo da probamo, svako za sebe, pa da sklopimo iskustva i da jos neko ima koristi od toga. 8)http://www.stud.fit.vutbr.cz/~xhorak28/index.php?page=Genius_WizardPen
E pogledaj ovo, bas se sa tim bakcem!!! Ako mi uspe recicu ti kako. Stvar je u tome sto mi treba nesto za USB, cini mi se da je za rs232 lakse kao i uvek, evo nesto ovako
Section “InputDevice”
Driver “summa”
Identifier “Mouse[3]”
Option “AlwaysCore” “on”
#Option “Cursor” originally was “Stylus”
Option “Cursor” “Puck”
#Option “Device” originally was “/dev/ttyS0”
Option “Device” “/dev/ttyS1”
Option “InputFashion” “Tablet”
Option “Name” “SUMMASKETCH”
Option “Vendor” “SUMMAGRAPHICS”
EndSectionA izgleda da je drajver acecad bas popularan za ove uredjaje
http://freshmeat.net/redir/acecad/81/url_homepage/acecadel ja radim ovaj pach kako treba???
kopiram wizardpen-2.6.7-r11-gentoo.diff u /usr/src/linux i udjem u isti, zatimpatch -p1 wizardpen-2.6.7-r11-gentoo.diff
i ni jedan fjl nije promenjn, a komanda stoji dok je ne prekinem sa CTR+C, pa posto nikad nisam raio sa diff osecam se malo glupo da pitam posle godinu dana koriscena iskljucivo linuxa 🙄
a pach izgleda ovako i mnogo me mrzi da sve to radim rucno
diff -ru linux-2.6.7-gentoo-r11/drivers/usb/input/hid-core.c linux-2.6.7-gentoo-r11-wizardpen/drivers/usb/input/hid-core.c
— linux-2.6.7-gentoo-r11/drivers/usb/input/hid-core.c 2004-10-10 23:01:01.000000000 +0200
+++ linux-2.6.7-gentoo-r11-wizardpen/drivers/usb/input/hid-core.c 2004-10-09 00:49:54.000000000 +0200
@@ -1355,6 +1367,10 @@
#define USB_DEVICE_ID_WACOM_VOLITO 0x0060
#define USB_DEVICE_ID_WACOM_PTU 0x0003+#define USB_VENDOR_ID_ACECAD 0x5543
+#define USB_DEVICE_ID_ACECAD_FLAIR 0x0004
+#define USB_DEVICE_ID_ACECAD_302 0x0008
+
#define USB_VENDOR_ID_KBGEAR 0x084e
#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001@@ -1485,6 +1501,9 @@
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
+
+ { USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
diff -ru linux-2.6.7-gentoo-r11/drivers/usb/input/Kconfig linux-2.6.7-gentoo-r11-wizardpen/drivers/usb/input/Kconfig
— linux-2.6.7-gentoo-r11/drivers/usb/input/Kconfig 2004-10-10 23:01:01.000000000 +0200
+++ linux-2.6.7-gentoo-r11-wizardpen/drivers/usb/input/Kconfig 2004-10-09 00:47:08.000000000 +0200
@@ -152,6 +152,18 @@
To compile this driver as a module, choose M here: the
module will be called wacom.+config USB_ACECAD
+ tristate “Acecad Flair tablet support”
+ depends on USB && INPUT
+ help
+ Say Y here if you want to use the USB version of the Acecad Flair
+ tablet. Make sure to say Y to “Mouse support”
+ (CONFIG_INPUT_MOUSEDEV) and/or “Event interface support”
+ (CONFIG_INPUT_EVDEV) as well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acecad.
+
config USB_KBTAB
tristate “KB Gear JamStudio tablet support”
depends on USB && INPUT
diff -ru linux-2.6.7-gentoo-r11/drivers/usb/input/Makefile linux-2.6.7-gentoo-r11-wizardpen/drivers/usb/input/Makefile
— linux-2.6.7-gentoo-r11/drivers/usb/input/Makefile 2004-10-10 23:01:01.000000000 +0200
+++ linux-2.6.7-gentoo-r11-wizardpen/drivers/usb/input/Makefile 2004-10-09 00:47:49.000000000 +0200
@@ -36,4 +36,5 @@
obj-$(CONFIG_USB_EGALAX) += touchkitusb.o
obj-$(CONFIG_USB_POWERMATE) += powermate.o
obj-$(CONFIG_USB_WACOM) += wacom.o
+obj-$(CONFIG_USB_ACECAD) += acecad.o
obj-$(CONFIG_USB_XPAD) += xpad.o
diff -ru linux-2.6.7-gentoo-r11/drivers/usb/Makefile linux-2.6.7-gentoo-r11-wizardpen/drivers/usb/Makefile
— linux-2.6.7-gentoo-r11/drivers/usb/Makefile 2004-10-10 23:01:01.000000000 +0200
+++ linux-2.6.7-gentoo-r11-wizardpen/drivers/usb/Makefile 2004-10-09 00:46:10.000000000 +0200
@@ -28,6 +28,7 @@
obj-$(CONFIG_USB_MTOUCH) += input/
obj-$(CONFIG_USB_POWERMATE) += input/
obj-$(CONFIG_USB_WACOM) += input/
+obj-$(CONFIG_USB_ACECAD) += input/
obj-$(CONFIG_USB_XPAD) += input/obj-$(CONFIG_USB_DABUSB) += media/
E ovo sam resio, sve uradio kako treba, rekompajlirao kernel…editovao xorg….. i…
(EE) NVIDIA(0): Failed to load GLX
(EE) xf86OpenSerial: Cannot open device /dev/input/event0
No such device.
(EE) AceCad driver unable to open device*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.E sad, a nikad nisam provalio da mi GLX ne ucitava, mamu mu…, nego da se vratimo na problem any sugestions??? 😕
Ukljucio sam modul za event input i:
(**) Option “Device” “/dev/input/event2”
(**) Mouse2 Tablet model is unspecified
(**) Kernel Input driver version is 1.0.0
(**) Kernel Input device name: “UC-LOGIC Tablet WP4030U”
(**) Acecad Tablet MaxX:31000 MaxY:31000 MaxZ:1023
(**) Acecad Tablet is in absolute mode
(**) Mouse2 Tablet is using standard button map
(**) Option “AlwaysCore”
(**) Mouse2: always reports core events
(II) XINPUT: Adding extended input device “Mouse2” (type: AceCad Tablet)
(II) XINPUT: Adding extended input device “Mouse1” (type: MOUSE)
(II) XINPUT: Adding extended input device “NVIDIA Event Handler” (type: Other)
(**) Acecad Tablet Device Init
(**) Acecad Tablet Control Proc
(**) Acecad Tablet Increment: 24
(II) Mouse1: ps2EnableDataReporting: succeeded
(**) Acecad Tablet Device OnI kad se startuje X mis radi normalno a na tabletu cim kliknem neko dugme ili prevucem, kursor jednostavno ode u gornji levi cosak i ne mrda dok ne pokrenem misa, gr…
evo kako mi je podesen X
u Server LayoutInputDevice “Mouse2” “AlwaysCore”
u input device
Section “InputDevice”
Identifier “Mouse2”
Driver “acecad”
Option “Device” “/dev/input/event2”
Option “Mode” “Absolute”
EndSectionkoristim drajver sa
http://www.stud.fit.vutbr.cz/~xhorak28/index.php?page=Genius_WizardPenMeni je pukla FAT ili kako vec se zaovce ta tabela pod linuxom, tako da nemogu da nastavim, a probacu cim nateram linux ili win da vide hdd particije (koje mio za sad jedino MaxBlast uredno prijavljuje, stime sto je linuxove particije obelezio sa Unknown)
Odoh sad da kukam po forumu, ako postoji neka fora da ozivim ovo cudo. 😯Posle mnogo nerviranja kontaktirao sam čoveka ko je napisao drajvere i uz zaista minimalne inpravke… 😆
Forum ‘Hardver’ je zaključan za nove teme i odgovore.