Latinica

[daniel1988]

1. zvuk radi ali nekad kad restartujem rachunar, xmms prikazuje da nije konfigurisan Output Plugin; nakon shto pokrenem alsaconf i ponovo “podesim” proradi – moze li nekako da se sredi da ne moram posle svekog restarta da radim alsaconf? (mislim ocu da mi alsa radi, moze ovo da se reshi ako se selektuje drugi plugin u xmms-u, ali ja sam zapeo za alsom.
3. data cdrom oce da se mountuje (film, programi za win), ali audio cd nece – nema veze audio pushtam iz K > Multimedia > CD Player i muzika pochinje. to je sredjeno

2*. kako da sredim za flash? ubacio sam ovaj red u fstabu
/dev/sda1 /mnt/flash vfat noauto,owner,rw,user 0 0
ali nece
root@survivor:/home/survivor# mount /dev/sda1
mount: special device /dev/sda1 does not exist
gde, shta, kako da definishem /dev/sda1 ?

[daniel1988]

Rekompajlirao sam kerel, radi k’o sat.

@LYb: evo greshe ovde, da ne postavljam na 2 mesta

Windows registry VS KDE ???

pod brojem 4 je

[daniel1988]

Doole probacu, hvala (nisam sad u linuxu, moram da instalim jos neke stvari i necu vishe ni da ulazim u ovaj gloopy win)

new:
4. imam problem da instaliram Kopete 0.10.1 (moram da instaliram ovaj, stari vishe ne radi, buguje se stalno kao: password incorrect)
evo outputa konzole; prvo uradim ./configure – bez problema uradi i ond ide ovo:
[code]Good – your configure finished. Start make now

bash-3.00# make
make all-recursive
make[1]: Entering directory `/tmp/kopete-0.10.1′
Making all in doc
make[2]: Entering directory `/tmp/kopete-0.10.1/doc’
Making all in .
make[3]: Entering directory `/tmp/kopete-0.10.1/doc’
make[3]: Nothing to be done for `all-am’.
make[3]: Leaving directory `/tmp/kopete-0.10.1/doc’
Making all in kopete
make[3]: Entering directory `/tmp/kopete-0.10.1/doc/kopete’
/opt/kde/bin/meinproc –check –cache index.cache.bz2 ./index.docbook
make[3]: Leaving directory `/tmp/kopete-0.10.1/doc/kopete’
Making all in da
make[3]: Entering directory `/tmp/kopete-0.10.1/doc/da’
/opt/kde/bin/meinproc –check –cache index.cache.bz2 ./index.docbook
make[3]: Leaving directory `/tmp/kopete-0.10.1/doc/da’
Making all in de
make[3]: Entering directory `/tmp/kopete-0.10.1/doc/de’
/opt/kde/bin/meinproc –check –cache index.cache.bz2 ./index.docbook
make[3]: Leaving directory `/tmp/kopete-0.10.1/doc/de’
Making all in es
make[3]: Entering directory `/tmp/kopete-0.10.1/doc/es’
make[3]: Nothing to be done for `all’.
make[3]: Leaving directory `/tmp/kopete-0.10.1/doc/es’
Making all in et
make[3]: Entering directory `/tmp/kopete-0.10.1/doc/et’
/opt/kde/bin/meinproc –check –cache index.cache.bz2 ./index.docbook
make[3]: Leaving directory `/tmp/kopete-0.10.1/doc/et’
Making all in fr
make[3]: Entering directory `/tmp/kopete-0.10.1/doc/fr’
/opt/kde/bin/meinproc –check –cache index.cache.bz2 ./index.docbook
index.docbook:101: parser error : Entity ‘traducteurPatricePawlak’ not defined
&traducteurCedricPasteur;&traducteurPatricePawlak;
^
index.docbook:1878: parser error : Entity ‘PatricePawlak’ not defined
>Traduction française par &CedricPasteur; et &PatricePawlak;</para
^
make[3]: *** [index.cache.bz2] Error 1
make[3]: Leaving directory `/tmp/kopete-0.10.1/doc/fr'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/tmp/kopete-0.10.1/doc'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/kopete-0.10.1'
make: *** [all] Error 2
bash-3.00#[/code]

Kako ovo da reshim? I inache kad izbaci ovakvo "govno" shta prvo uradite, koji su prvi koraci koje treba da uradim i tek onda ako ne uspem da shrljam ovde po forumu.

Pozdrav svima,
Daniel

[daniel1988]

2. sredio sam za zvuchu, radi k’o grom – hvala na pomoci.
Doole, pored ovog shto si ti napisao, bilo je potrebno u ” PCI devices —> ” ukljuchiti podrsku za moju/tvoju zvuchnu, pri dnu stranice ima ta opcija.

2*. probacu sutra kad mi drug vrati fdrive, inache nisam u fstab-u video taj red, a secam se da je u suse-u postojao i za flash

novo:
3. kako da izmenim red za cdrom, kad sam kucao komandu da mi mountuje cdrom, prihvati, ali napishe da treba da definisem file system cdroma (nisam sad trenutno u linuxu, da napishem tachno shta mi prijavljuje)

[daniel1988]

Gresheke cu da napishem kasnije – problem je kod Kopete-a i Downloader4X-a.

Ako posle make xconfig-a, dam komandu:
make bzImage && make modules && make modules_install
da li linux ovom poslednjom komandom (modules_install) sve module instalira u kernel (ovo pitam jer posle kompajliranja kernela ukucao sam lsmod i nije bilo nichega).
Inache u ono iz iskoshenog teksta je iz jednog howto-a.

Pozdrav,
Daniel

[daniel1988]

Ajde pomoc ovde, stvarno me nervira ovo sa monitorom.
Nek neko kome se monior gasi posle npr. 3 min (znachi gasi, lampica na monitoru trepce, ili na nekim monitorima promeni boju – tj. ode monitor u standby) postavi deo svog xorg.conf i kako je podesio Power Management u KDEu.

Pozdrav,
Daniel

[daniel1988]

Ajde neko kome ovo radi nek cp deo xorg.conf-a kako treba da izgleda ovo.
Evo kako je kod mene:
[code]# **********************************************************************
# Server flags section.
# **********************************************************************

Section “ServerFlags”

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option “NoTrapSignals”

# Uncomment this to disable the VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option “DontVTSwitch”

# Uncomment this to disable the server abort sequence
# This allows clients to receive this key event.

# Option “DontZap”

# Uncomment this to disable the / mode switching
# sequences. This allows clients to receive these key events.

# Option “DontZoom”

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option “DisableVidModeExtension”

# Uncomment this to enable the use of a non-local xvidtune client.

# Option “AllowNonLocalXvidtune”

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option “DisableModInDev”

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option “AllowNonLocalModInDev”

# Set the basic blanking screen saver timeout.

Option “blank time” “3” # 10 minutes

# Set the DPMS timeouts. These are set here because they are global
# rather than screen-specific. These settings alone don’t enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

Option “standby time” “3”
Option “suspend time” “3”
Option “off time” “4”

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don’t overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option “EstimateSizesAggresively” “0”

EndSection[/code]
Nece monitor da se gasi, samo pocrni posle odredjenog vremena (lampica na monitoru je stalno ukljuchena, ne treperi)

Pozdrav,
Daniel

[daniel1988]

@Doole:
1. aj prevedi ovo na make xconfig ako ti nije teshko, da ne kompajliram jos jednom
2. nije odmah htelo, al’ sad radi – mogu da kopiram fajlove na particiju
2*. shta treba da dodam u fstabu da bi mi prepoznao USB flash drive

[daniel1988]

Probao sam 2.6.12.2 i radi ok, sada mi driver za wireless radi bez problema (uz malo muke sam ga naterao, ali bitno je da sada radi)
Tako da obavezno kompajliraj 2.6.12.x. Drug na MSN-u mi je rekao da neparne verzije kernela su test veerzije tako da evo ti jos jedan razlog da probas 2.6.12.x

Pozdrav,
Daniel

[daniel1988]

Evo me sad iz linuxa. Pre nego shto sam postavio temu otvorio sam sve sa potencijalnim reshenjem, snimio i kasnije iz linuxa nashao. Znachi problem je bio u nepotpunoj kompatibilnosti Source Code-u drivera sa novim kernelom. A fora je u tome bila da nisam odmah skontao kako treba da se modifikuje – par puta nije hteo da mi iskompajlira driver samo zbog jedne zagrade; posle sam jos jednom pogledao i dodao jos jednom (mislio sam, mozda ce da proradi) i na moju srecu proradilo je.

A za odgovaranje, znam iz isqstva, kad sam pre 2 meseca postavio temu nisu mi odgovorili nekoliko dana, dok nisam sam sebi odgovorio 😀 – zato sam i napisao

@milosk: 10X enivej, uvek si tu da pomognesh 😉

[Autor]

Članci