Napravljene poruke na forumu
-
AutorČlanci
-
arm
Učesnikpodesio sam i radi, imaš pivo od mene. Ja sam iz Kraljeva odakle si ti?
arm
Učesnikšta trebam da dodam u modules.conf
arm
UčesnikSlack je veoma drugačiji po pitanju dozvola od MDK10. ZAŠTO? Možda je tako i bolje, ako su u pitanju serveri! Ali običan korisnik? Ma nema veze. Kao root kada pokrenem kdetv u podešavanjima vidi mi tv katrivu ali nemogu da biram kanale( svi pokazuju sneg )Kao običan korisnik nevidi mi karticu. To je samo pitanje dozvola pa i nije strašno. “V4L” (video for linux) sam morao ručno da upišem da ga koristi kao modul u horg.conf-u.
Na naredbu “dmesg” ne piše ime moje kartice već”UNKNOWN/GENERIC”. Gde da upišem ime moje kartice koje nosi br.78 ako se nevaram tako piše u bttv drajveru. Evo šaljem i deo koji je vezan za katricu
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6106 Wed Jun 23 08:14:
01 PDT 2004
PCI: Found IRQ 10 for device 00:11.0
PCI: Sharing IRQ 10 with 00:0f.0
PCI: Sharing IRQ 10 with 00:0f.1
PCI: Found IRQ 5 for device 00:10.0
PCI: Sharing IRQ 5 with 00:07.2
PCI: Sharing IRQ 5 with 00:07.3
ttySHCF0 at I/O 0xe800 (irq = 5) is a Conexant HCF controllerless PCI modem
PCI: Found IRQ 10 for device 00:0f.1
PCI: Sharing IRQ 10 with 00:0f.0
PCI: Sharing IRQ 10 with 00:11.0
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 10 for device 00:0f.0
PCI: Sharing IRQ 10 with 00:0f.1
PCI: Sharing IRQ 10 with 00:11.0
bttv0: Bt878 (rev 17) at 00:0f.0, irq: 10, latency: 32, mmio: 0xde011000
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv: readee error
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80… not found
bttv0: i2c: checking for TDA9875 @ 0xb0… not found
bttv0: i2c: checking for TDA7432 @ 0x8a… not found
bttv0: registered device video0
bttv0: registered device vbi0Ako neko zna šta dalje ja čekam!
arm
Učesnikštampač radi super ali tv i fm jok
arm
Učesnikda li imaju driveri za conexanta hcf u tom power packu
arm
UčesnikZa tv karticu neznam, jer ni meni ne radi zvuk
malo je glupo ali probaj da podigneš kmix i da odčekiraš “line in ” i nek ido njega line dok ti tv kartica radi i dobićeš zvuk!? kod mene je kada sam instalirao MDK 10 i 9 sve bilo čekirano u kmixu i tu je bio problem ,neko neslaganje ali sada kworld radi bolje nego u wi.u. probaj ovo radi 100%.
Kad pokreneš zvuk plaziš pivo 😆arm
Učesnikda li je neko poterao conexante hcf na 2.6 kernel na 56k umesto na 14k
helparm
UčesnikThis package does not contain pre-built modules suitable for your system:
Distribution: Mandrake-10.0
Kernel arch: i686
Kernel version: linux-2.6.3-4mdkTrying to automatically re-compile the modules..
(this requires a C compiler and proper kernel sources to be installed)Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.6.3-4mdk/build]WARNING: missing file /lib/modules/2.6.3-4mdk/build/include/linux/modversions.h
The cause of this problem is usually a missing or misconfigured
kernel source tree (and sometimes an incorrect directory or symbolic link).First, ensure that the proper kernel source and compiler packages
from your distribution vendor and/or the community are installed.The Linux kernel can then be reconfigured by running “make menuconfig”
under the kernel source directory (usually /usr/src/linux).Verify that the proper options for your system are selected,
and that CONFIG_SMP (“Symmetric multi-processing support” under
“Processor type and features”) is disabled, as this driver is
presently designed to work on single-processor machines.Then compile and install your new kernel (for more information about
this procedure, see the README file under the kernel source directory),
reboot the system using the new kernel, and re-run “hcfpciconfig”.
***************************************************************************
Izbacuje mi ovu grešku, WARNING: missing file /lib/modules/2.6.3-4mdk/build/include/linux/modversions.h
“modversions.h” ovaj fajl stvarno tamo nema!
šta ti misliš o ovome?
Usput sors kernel je instaliran!arm
Učesnikprobao sam i nece! Ti mora da koristiš kernel 2.4 na MDK 10 pa zato tebi hoće a meni neće da se kompajlira drajver za modem.
Proveri koji ti je kernel pa ako sam upravu ništa a ako nisam reci mi kako to radiš.
POZDRAV.arm
Učesnikdrajver za 2.6 kernel ne za 2.4
osim ako neznaš kako da drajver za 2.4 kernel instaliram za 2.6… -
AutorČlanci