Latinica

[zchira]

probao sam i bez firewall-a i napise nesto kao ‘prikupljam informacije o 97 servera’ (al na engleskom 🙂 )
ali je lista i dalje prazna, tj. nema ni jednog servera…

[zchira]

ne razumem sa bas toliko da bih mogao da promenim. 🙂

Evo sadrzaj mog rc.firewall-a pa ako neko moze da vidi da li on mozda blokira tremulous:

#+———————-+
#| iptables init script |
#+———————-+
echo “Svet kompjutera firewall skript…”

iptables -F
iptables -X

iptables -P FORWARD DROP
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT

# syntax :: iptables -A INPUT -i lo -j ACCEPT

iptables -A INPUT -s 255.255.255.255 -j LOG –log-prefix “Bogus routing attempt: ” –log-level warning
iptables -A INPUT -s 255.255.255.255 -j DROP
iptables -A INPUT -p icmp –icmp-type echo-request -j LOG –log-prefix “Ping request: ” –log-level warning
iptables -A INPUT -p icmp –icmp-type echo-request -j DROP
iptables -A INPUT -p tcp –syn -s 217.26.64.139 -j LOG –log-prefix “Allowing mail server connect” –log-level warning
iptables -A INPUT -p tcp –syn -s 217.26.64.139 -j ACCEPT
iptables -A INPUT -p tcp -s 127.0.0.1 -d 127.0.0.1 –destination-port 631 -j ACCEPT

# Apache
iptables -A INPUT -p tcp –syn -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT
iptables -A INPUT -p tcp -s 127.0.0.1 -d 127.0.0.1 –destination-port 80 -j ACCEPT

# MySQL
iptables -A INPUT -p tcp -s 127.0.0.1 -d 127.0.0.1 –destination-port 3306 -j ACCEPT

iptables -A INPUT -p tcp –syn -j LOG –log-prefix “Connection attempt: ” –log-level warning
iptables -A INPUT -p tcp –syn -j DROP
iptables -A INPUT -m unclean -j LOG –log-prefix “Unclean: ” –log-level warning
iptables -A INPUT -m unclean -j DROP
iptables -A INPUT -m state –state INVALID -j DROP

echo “Firewall skript pokrenut.”

[zchira]

to i uradim. I ili ne izbaci nista ili trazi u nedogled (a jednom sa i zamrzao)

jel Moguce da firewall zeza? Imam neku rc.firewall skriptu koja se pokrece pri sartu racunara (mada mi on ne blokira ni torent ni browsere )…

[zchira]

proraido je kao mod za quake3, ali mi je lista sa serverima prazna.
Jel treba sam da unosim adresu servera ili igra treba da mi ponudi neke?
Gde mogu da nadjem spisak servera?

[zchira]

Ne znam koliko traje instalacija cedege, ali instalacija wine-a traje (relativno) kratko.
Ja sam na slackwareu wine instalirao preko slapt-get-a tj. gslapt-a (nadjes wine na spisku, chekiras, cekas dok se downloaduje i on se sam instalira)  – znaci nekoliko klika misem.

Sto se tice instalacije igrica – meni se warcraft3 instalirao za isto vreme kao na windowsu…

[zchira]

evo da se pohvalim da sam pokrenuo warcraft 3 🙂

Ovako:
-ubacim CD sa igrom
-uz pomoc wine-a pokranem install.exe
-prihvatim da se instalira u c:program fileswarcraft3
      wine pravi kobajagi c: particiju koja se zapravo nalazi u /home/username/.wine/drive_c
-prihvatim i da kreira shortcut na desktopu
      na desktopu se pojavljuje ikonica wc3. Desni click/properties/aplication
      i tu gde pise command, umesto:  wine “C:Program FilesWarcraft IIIWarcraft III.exe”
      stavim:  wine “C:Program FilesWarcraft IIIWarcraft III.exe -opengl”  (dodato -opengl na kraju)
-negde sam procitao da igra nece da pusta uvodne animacije pa se ode u :
      /home/username/.wine/drive_c/Program Files/Warcraft III
      i folder movies se preimenuje u movies_old (a moze i da se obrise 🙂 )
-sada prekopiram crack sa diska u /home/username/.wine/drive_c/Program Files/Warcraft III

I to je to!!!!!!
Ne da radi, nego leti kao ZMAJ!!!!

[zchira]

evo, warcraft mi ne radi (ni frozen throne)
Pocne da se nesto ucitava, i da menja rezoluciju i onda izbaci nazad u desktop.
Ja inace igru pokrecem sa windows particije (tamo mi je instalirana). Jel treba da instaliram igricu iz linuxa, tj. da pomocu wine-a pokrenem setup.exe i odradim instalaciju?
A mozda trebam da idem u winXP pa da proverim da li je grafika u WC3 na openGL a ako nije da je postavim na openGL……….

[zchira]

da , ali i tad je na sajtu bio veliki spisak igrica koje wine podrzava a kod mene nisu htele da rade.

Verovatno nisam dovoljno ceprkao.

Bilo bi lepo kad bi neko iskusniji napisao neko uputstvo za fine tune wine-a 🙂 (uz primer kako recimo pokrenuti neku konkretnu vwliku igru (npr:warcraft 3 ili trackmania nations )

To bi bio i doprinos popularizaciji linuxa jer mnogi (pa i ja) drze windows u racunaru samo zbog igrica.

[zchira]

inastalirao sam i ja neki wine (skinuo sam pre par meseci verziju koja je tad bila najnovije)  i pravo da vam kazem skoro nista nisam uspeo da pokrenem.
Uspeo sam da pokrenem neke yetisports igrice, zuma DeLuxe, i sl…
O nekim velikim igricama ili programima ni govora…
Da li su mi potrebni neki windowsovi dll-ovi ili nesto drugo – ne znam…

[zchira]

probao sam ovako:

./configure –prefix=`kde-config –prefix`
make
su
checkinstall

i tu je izbacio neke greske, tj. nije napravio paket.
A configure i make je prosao bez problema.

Ne znam da li da idem na make install umesto checkinstall ali koliko ja znam (a nisam bas siguran) ako instaliram sa make install ne mogu vise da ga uklonim uz pomoc pkgtool-a???

evo i sta izbacuje posle checkinstall:

bash-3.00# checkinstall

checkinstall 1.6.0, Copyright 2002 Felipe Eduardo Sanchez Diaz Duran
          This software is released under the GNU GPL.

The checkinstallrc file was not found at:
/usr/local/lib/checkinstall/checkinstallrc

Assuming default values.

The package documentation directory ./doc-pak does not exist.
Should I create a default set of package docs?  [y]: n

Please choose the packaging method you want to use.
Slackware [S], RPM [R] or Debian [D]? S

Please write a description for the package. Remember that pkgtool shows
only the first one when listing packages so make that one descriptive.

End your description with an empty line or EOF.
>> amarok player:-)
>>

********************************************
**** Slackware package creation selected ***
********************************************

This package will be built according to these values:

1 –  Summary: [ amarok player:-) ]
2 –  Name:    [ amarok ]
3 –  Version: [ 1.4.1 ]
4 –  Release: [ 1 ]
5 –  License: [ GPL ]
6 –  Group:  [ Applications/System ]
7 –  Architecture: [ i386 ]
8 –  Source location: [ amarok-1.4.1 ]
9 –  Alternate source location: [  ]
10 – Requires: [  ]

Enter a number to change any of them or press ENTER to continue:

Installing with make install…

========================= Installation results ===========================
Making install in amarok
make[1]: Entering directory `/_install/amarok-1.4.1/amarok’
Making install in src
make[2]: Entering directory `/_install/amarok-1.4.1/amarok/src’
Making install in amarokcore
make[3]: Entering directory `/_install/amarok-1.4.1/amarok/src/amarokcore’
make[4]: Entering directory `/_install/amarok-1.4.1/amarok/src/amarokcore’
make[4]: Nothing to be done for `install-exec-am’.
/bin/sh ../../../admin/mkinstalldirs /opt/kde/share/config.kcfg
/usr/bin/ginstall -c -p -m 644 amarok.kcfg /opt/kde/share/config.kcfg/amarok.kcfg
make[4]: Leaving directory `/_install/amarok-1.4.1/amarok/src/amarokcore’
make[3]: Leaving directory `/_install/amarok-1.4.1/amarok/src/amarokcore’
Making install in sqlite
make[3]: Entering directory `/_install/amarok-1.4.1/amarok/src/sqlite’
make[4]: Entering directory `/_install/amarok-1.4.1/amarok/src/sqlite’
make[4]: Nothing to be done for `install-exec-am’.
make[4]: Nothing to be done for `install-data-am’.
make[4]: Leaving directory `/_install/amarok-1.4.1/amarok/src/sqlite’
make[3]: Leaving directory `/_install/amarok-1.4.1/amarok/src/sqlite’
Making install in analyzers
make[3]: Entering directory `/_install/amarok-1.4.1/amarok/src/analyzers’
make[4]: Entering directory `/_install/amarok-1.4.1/amarok/src/analyzers’
make[4]: Nothing to be done for `install-exec-am’.
make[4]: Nothing to be done for `install-data-am’.
make[4]: Leaving directory `/_install/amarok-1.4.1/amarok/src/analyzers’
make[3]: Leaving directory `/_install/amarok-1.4.1/amarok/src/analyzers’
Making install in data
make[3]: Entering directory `/_install/amarok-1.4.1/amarok/src/data’
make[4]: Entering directory `/_install/amarok-1.4.1/amarok/src/data’
make[4]: Nothing to be done for `install-exec-am’.
/bin/sh ../../../admin/mkinstalldirs /opt/kde/share/apps/amarok/data
/usr/bin/ginstall -c -p -m 644 Cool-Streams.xml /opt/kde/share/apps/amarok/data/Cool
-Streams.xml
/usr/bin/ginstall -c -p -m 644 Amarok_1.4_Welcome.ogg /opt/kde/share/apps/amarok/dat
a/Amarok_1.4_Welcome.ogg
/usr/bin/ginstall: preserving times for `/opt/kde/share/apps/amarok/data/Amarok_1.4_W
elcome.ogg’: No such file or directory
/usr/bin/ginstall: cannot set time stamps for `/opt/kde/share/apps/amarok/data/Amarok
_1.4_Welcome.ogg’: No such file or directory
/usr/bin/ginstall -c -p -m 644 ball.png /opt/kde/share/apps/amarok/data/ball.png
/usr/bin/ginstall -c -p -m 644 dot.png /opt/kde/share/apps/amarok/data/dot.png
/usr/bin/ginstall -c -p -m 644 equalizer_presets.xml /opt/kde/share/apps/amarok/data
/equalizer_presets.xml
/usr/bin/ginstall -c -p -m 644 firstrun.m3u /opt/kde/share/apps/amarok/data/firstrun
.m3u
/usr/bin/ginstall: preserving times for `/opt/kde/share/apps/amarok/data/firstrun.m3u
‘: No such file or directory
/usr/bin/ginstall: cannot set time stamps for `/opt/kde/share/apps/amarok/data/firstr
un.m3u’: No such file or directory
/usr/bin/ginstall -c -p -m 644 grid.png /opt/kde/share/apps/amarok/data/grid.png
/usr/bin/ginstall -c -p -m 644 wirl1.png /opt/kde/share/apps/amarok/data/wirl1.png
/usr/bin/ginstall -c -p -m 644 wirl2.png /opt/kde/share/apps/amarok/data/wirl2.png
make[4]: Leaving directory `/_install/amarok-1.4.1/amarok/src/data’
make[3]: Leaving directory `/_install/amarok-1.4.1/amarok/src/data’
Making install in plugin
make[3]: Entering directory `/_install/amarok-1.4.1/amarok/src/plugin’
make[4]: Entering directory `/_install/amarok-1.4.1/amarok/src/plugin’
make[4]: Nothing to be done for `install-exec-am’.
make[4]: Nothing to be done for `install-data-am’.
make[4]: Leaving directory `/_install/amarok-1.4.1/amarok/src/plugin’
make[3]: Leaving directory `/_install/amarok-1.4.1/amarok/src/plugin’
Making install in images
make[3]: Entering directory `/_install/amarok-1.4.1/amarok/src/images’
Making install in icons
make[4]: Entering directory `/_install/amarok-1.4.1/amarok/src/images/icons’
make[5]: Entering directory `/_install/amarok-1.4.1/amarok/src/images/icons’
make[5]: Nothing to be done for `install-exec-am’.
/bin/sh ../../../../admin/mkinstalldirs /opt/kde/share/apps/amarok/icons/hicolor/64×6
4/actions
/usr/bin/ginstall -c -p -m 644 ./hi64-action-amarok_configure.png /opt/kde/share/apps
/amarok/icons/hicolor/64×64/actions/amarok_configure.png
/usr/bin/ginstall: preserving times for `/opt/kde/share/apps/amarok/icons/hicolor/64x
64/actions/amarok_configure.png’: No such file or directory
/usr/bin/ginstall: cannot set time stamps for `/opt/kde/share/apps/amarok/icons/hicol
or/64×64/actions/amarok_configure.png’: No such file or directory
make[5]: *** [install-kde-icons] Error 1
make[5]: Leaving directory `/_install/amarok-1.4.1/amarok/src/images/icons’
make[4]: *** [install-am] Error 2
make[4]: Leaving directory `/_install/amarok-1.4.1/amarok/src/images/icons’
make[3]: *** [install-recursive] Error 1
make[3]: Leaving directory `/_install/amarok-1.4.1/amarok/src/images’
make[2]: *** [install-recursive] Error 1
make[2]: Leaving directory `/_install/amarok-1.4.1/amarok/src’
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/_install/amarok-1.4.1/amarok’
make: *** [install-recursive] Error 1

****  Installation failed. Aborting package creation.

Cleaning up…OK

Bye.

bash-3.00#

[Autor]

Članci