jovir

Napravljene poruke na forumu

Gledanje 41 članaka - 41 do 50 (od 538 ukupno)
1 2 3 4 5 6 … 52 53 54
  • Autor
    Članci
  • 22. decembar 2008. u 9:20 pm kao odgovor na: [rešeno] HP 530 i problem sa rezolucijom #74519
    jovir
    Učesnik

    Intelov drajver sigurno si već imao instaliran.

    Fajl /etc/X11/xorg.conf bi trebao nekako ovako da izgleda da bi podigao rezoluciju 1280×800:

    [code]Section “ServerLayout”
    Identifier    “XFree86 Configured”
    Screen      0  “Screen0” 0 0
    InputDevice    “Keyboard0” “CoreKeyboard”
            InputDevice    “USB Mouse” “CorePointer”
    # compiz, beryl 3D-Support with DRI & Composite
            Option        “AIGLX”    “true”
    EndSection

    Section “ServerFlags”
    Option “AllowMouseOpenFail”  “true”

    EndSection

    Section “Files”
    RgbPath      “/usr/share/X11/rgb”
    ModulePath  “/usr/lib/xorg/modules”
    FontPath    “/usr/share/fonts/X11/misc:unscaled”
    FontPath    “/usr/share/fonts/X11/75dpi:unscaled”
    FontPath    “/usr/share/fonts/X11/100dpi:unscaled”
    FontPath    “/usr/share/fonts/X11/Type1”
    FontPath    “/usr/share/fonts/X11/Speedo”
    FontPath    “/usr/share/fonts/X11/PEX”
    # Additional fonts: Locale, Gimp, TTF…
    FontPath    “/usr/share/fonts/X11/cyrillic”
    # FontPath    “/usr/share/fonts/X11/latin2/75dpi”
    # FontPath    “/usr/share/fonts/X11/latin2/100dpi”
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath    “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”
    FontPath    “/usr/share/fonts/truetype”
    FontPath    “/usr/share/fonts/latex-ttf-fonts”
    EndSection

    Section “Module”
    # Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408
    Load  “dbe” # Double Buffering Extension, very important.
    Load  “dri” # This shouldn’t be available choice if user has selected driver vga, vesa or nv.
    Load  “glx” # GLX Extension.
    Load  “freetype” # Freetype fonts.
    Load  “type1”  # Type 1 fonts
    Load  “record” # Developer extension, usually not needed
    # Load  “extmod” # This is okay, but if you look into “man xorg.conf” you’ll find option NOT to include DGA extension with extmod, and for a good reason.. DGA causes instability as it access videoram without consulting X about it.
    SubSection      “extmod”
    Option          “omit xfree86-dga”
    EndSubSection
    # Load  “speedo” # Speedo fonts, this module doesn’t exist in Xorg 7.0.17
    # The following are deprecated/unstable/unneeded in Xorg 7.0
    #      Load  “ddc”  # ddc probing of monitor, this should be never present, as it gets automatically loaded.
    # Load  “GLcore” # This should be never present, as it gets automatically loaded.
    #      Load  “bitmap” # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xorg.conf makes X try to load it twice.
    EndSection

    Section “Extensions”
    # beryl and compiz need this, but it can cause bad (end even softreset-resistant)
    # effects in some graphics cards, especially nv.
    # Option “Composite” “Enable”
    EndSection

    Section “InputDevice”
    Identifier  “Keyboard0”
    Driver      “kbd”
            Option      “CoreKeyboard”
    Option “XkbRules” “xorg”
    Option “XkbModel” “pc105”
    Option “XkbLayout” “us”

    EndSection

    Section “InputDevice”
    Identifier  “Serial Mouse”
    Driver      “mouse”
    Option      “Protocol” “Microsoft”
    Option      “Device” “/dev/ttyS0”
    Option      “Emulate3Buttons” “true”
    Option      “Emulate3Timeout” “70”
    Option     “SendCoreEvents”  “true”
    EndSection

    Section “InputDevice”
    Identifier  “PS/2 Mouse”
    Driver      “mouse”
    Option      “Protocol” “auto”
    Option          “ZAxisMapping”          “4 5”
    Option      “Device” “/dev/psaux”
    Option      “Emulate3Buttons” “true”
    Option      “Emulate3Timeout” “70”
    Option     “SendCoreEvents”  “true”
    EndSection

    Section “InputDevice”
            Identifier      “USB Mouse”
            Driver          “mouse”
            Option          “Device”                “/dev/input/mice”
    Option “SendCoreEvents” “true”
            Option          “Protocol”              “IMPS/2”
            Option          “ZAxisMapping”          “4 5”
            Option          “Buttons”              “5”
    EndSection

    # Auto-generated

    Section “Monitor”
    Identifier “Monitor0”
    Option “DPMS” “true”
    VendorName “CPT”
    ModelName “CPT1773”
    # HorizSync    28.0 – 78.0 # Warning: This may fry very old Monitors
    HorizSync    28.0 – 96.0 # Warning: This may fry old Monitors
    VertRefresh 49.0 – 60
    # VertRefresh 49.0 – 60
    #  Default modes distilled from
    #      “VESA and Industry Standards and Guide for Computer Display Monitor
    #      Timing”, version 1.0, revision 0.8, adopted September 17, 1998.
    #  $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640×350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine “640×350”    31.5  640  672  736  832    350  382  385  445 +hsync -vsync
    # 640×400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine “640×400”    31.5  640  672  736  832    400  401  404  445 -hsync +vsync
    # 720×400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine “720×400”    35.5  720  756  828  936    400  401  404  446 -hsync +vsync
    # 640×480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine “640×480”    25.2  640  656  752  800    480  490  492  525 -hsync -vsync
    # 640×480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine “640×480”    31.5  640  664  704  832    480  489  491  520 -hsync -vsync
    # 640×480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine “640×480”    31.5  640  656  720  840    480  481  484  500 -hsync -vsync
    # 640×480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine “640×480”    36.0  640  696  752  832    480  481  484  509 -hsync -vsync
    # 800×600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine “800×600”    36.0  800  824  896 1024    600  601  603  625 +hsync +vsync
    # 800×600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine “800×600”    40.0  800  840  968 1056    600  601  605  628 +hsync +vsync
    # 800×600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine “800×600”    50.0  800  856  976 1040    600  637  643  666 +hsync +vsync
    # 800×600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine “800×600”    49.5  800  816  896 1056    600  601  604  625 +hsync +vsync
    # 800×600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine “800×600”    56.3  800  832  896 1048    600  601  604  631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine “1024×768”  44.9 1024 1032 1208 1264    768  768  776  817 +hsync +vsync Interlace
    # 1024×768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine “1024×768”  65.0 1024 1048 1184 1344    768  771  777  806 -hsync -vsync
    # 1024×768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine “1024×768”  75.0 1024 1048 1184 1328    768  771  777  806 -hsync -vsync
    # 1024×768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine “1024×768”  78.8 1024 1040 1136 1312    768  769  772  800 +hsync +vsync
    # 1024×768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine “1024×768”  94.5 1024 1072 1168 1376    768  769  772  808 +hsync +vsync
    # 1152×864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine “1152×864”  108.0 1152 1216 1344 1600    864  865  868  900 +hsync +vsync
    # 1280×960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine “1280×960”  108.0 1280 1376 1488 1800    960  961  964 1000 +hsync +vsync
    # 1280×960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine “1280×960”  148.5 1280 1344 1504 1728    960  961  964 1011 +hsync +vsync
    # 1280×1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine “1280×1024” 108.0 1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
    # 1280×1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine “1280×1024” 135.0 1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
    # 1280×1024 @ 85Hz (VESA) hsync: 91.1kHz
    # ModeLine “1280×1024” 157.5 1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync
    ModeLine “1280×1024” 157.50 1280 1328 1488 1728  1024 1025 1028 1072 +hsync +vsync
    # 1600×1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine “1600×1200” 162.0 1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
    # 1600×1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine “1600×1200” 175.5 1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
    # 1600×1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine “1600×1200” 189.0 1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
    # 1600×1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine “1600×1200” 202.5 1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
    # 1600×1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine “1600×1200” 229.5 1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
    # 1792×1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine “1792×1344” 204.8 1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync
    # 1792×1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine “1792×1344” 261.0 1792 1888 2104 2456  1344 1345 1348 1417 -hsync +vsync
    # 1856×1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine “1856×1392” 218.3 1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync
    # 1856×1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine “1856×1392” 288.0 1856 1984 2208 2560  1392 1393 1396 1500 -hsync +vsync
    # 1920×1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine “1920×1440” 234.0 1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync
    # 1920×1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine “1920×1440” 297.0 1920 2064 2288 2640  1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine “1800×1440”  230    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
    ModeLine “1800×1440”  250    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640×480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine “640×480”  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
    # 768×576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine “768×576”  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
    # 768×576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine “768×576”  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
    # 768×576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine “768×576”  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
    # 768×576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine “768×576”  51.84  768 808 888 1008  576 577 580 605  -HSync +Vsync
    # 768×576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine “768×576”  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
    # 800×600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine “800×600”  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
    # 1024×768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine “1024×768”  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
    # 1152×864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine “1152×864”  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
    # 1152×864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine “1152×864”  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
    # 1152×864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine “1152×864”  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
    # 1280×960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine “1280×960”  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
    # 1280×960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine “1280×960”  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
    # 1280×960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine “1280×960”  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
    # 1280×1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine “1280×1024”  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
    # 1400×1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine “1400×1050”  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
    # 1400×1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine “1400×1050”  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
    # 1400×1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine “1400×1050”  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
    # 1400×1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine “1400×1050”  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
    # 1400×1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine “1400×1050”  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
    # 1600×1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine “1600×1200”  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
    # 1680×1050 (Notebook)
    ModeLine “1680×1050” 154.2 1680 1712 2296 2328  1050 1071 1081 1103
    # 1920×1200 @ 60.00 Hz (GTF)  hsync: 74.52; pclk: 193.16 MHz
    ModeLine “1920×1200” 193.16  1920 2048 2256 2592  1200 1201 1204 1242  -HSync +HSync
    EndSection

    Section “Device”
    ### Available Driver options are:-
    # sw_cursor is needed for some ati and radeon cards
            #Option    “sw_cursor”
            #Option    “hw_cursor”
            #Option    “NoAccel”
            #Option    “ShowCache”
            #Option    “ShadowFB”
            #Option    “UseFBDev”
            #Option    “Rotate”
    Identifier  “Card0”
    # auto-generated
    Driver      “i810”
    VendorName  “All”
    BoardName  “All”
    # BusID      “PCI:1:0:0”
    #
    # compiz, beryl 3D-Support with DRI & Composite
    Option “XAANoOffscreenPixmaps”
    Option “AllowGLXWithComposite” “true”
    Option “EnablePageFlip” “true”

    # This two lines are (presumably) needed to prevent fonts from being scrambled
            Option  “XaaNoScanlineImageWriteRect” “true”
            Option  “XaaNoScanlineCPUToScreenColorExpandFill” “true”
    EndSection

    Section “Screen”
    Identifier “Screen0”
    Device    “Card0”
    Monitor    “Monitor0”
    DefaultColorDepth 16
    Option “AddARGBGLXVisuals” “true”
    Option “DisableGLXRootClipping” “true”
    SubSection “Display”
    Depth    1
    Modes “1280×800” “1152×864” “1024×768” “800×600” “640×480”
    EndSubSection
    SubSection “Display”
    Depth    4
    Modes “1280×800” “1152×864” “1024×768” “800×600” “640×480”
    EndSubSection
    SubSection “Display”
    Depth    8
    Modes “1280×800” “1152×864” “1024×768” “800×600” “640×480”
    EndSubSection
    SubSection “Display”
    Depth    15
    Modes “1280×800” “1152×864” “1024×768” “800×600” “640×480”
    EndSubSection
    SubSection “Display”
    Depth    16
    Modes “1280×800” “1152×864” “1024×768” “800×600” “640×480”
    EndSubSection
    SubSection “Display”
    Depth    24
    Modes “1280×800” “1152×864” “1024×768” “800×600” “640×480”
    EndSubSection
    SubSection “Display”
    Depth    32
    Modes “1280×800” “1152×864” “1024×768” “800×600” “640×480”
    EndSubSection
    EndSection

    Section “DRI”
    Mode 0666
    EndSection

    [/code]

    Pozdrav!

    29. novembar 2008. u 10:06 am kao odgovor na: OpenOffice.org 3 i tasteri “backspace” i strelice? #74210
    jovir
    Učesnik

    Ja sam uzeo sa LinuxPackages OO3 u tgz paketu i sve radi, no problem 🙂

    Tacno tako, sada je sve OK.
    Hvala!

    23. septembar 2008. u 7:33 pm kao odgovor na: LuGUE počeo sa radom #72584
    jovir
    Učesnik

    Jeli Arilje bliža okolina?
    😀  :p

    14. septembar 2008. u 7:42 pm kao odgovor na: Download sa rapidshera preko Linuxa #72468
    jovir
    Učesnik

    Nisam JDownloader koristio do danas i prvi utisak je da je duplo sporiji nego npr. Firefox.
    Mozda nesto specificno oko podesavanja?!
    Free nalog na RapidShare, Slackware 12.1.
    Pozdrav!

    14. maj 2008. u 8:09 am kao odgovor na: Za crtanje u 2D i 3D #69675
    jovir
    Učesnik

    Проблем је кад од неког добијеш dwg, а из неког разлога неће да ти достави dxf, или ако поред цртежа има још којечега па dxf или не подржава или се учитава 100 година.

    To moze da bude problem, ali se moze desiti i izmedju pojedinih verzija dwg-a…
    Zato treba narod vaspitavati da se sva dokumenta salju u pdf formatu…

    9. maj 2008. u 10:09 pm kao odgovor na: Za crtanje u 2D i 3D #69673
    jovir
    Učesnik

    Ako su cisti tehnicki crtezi mozda jos i nadjes nesto sto ti odgovara. Najveci problem je kompatibilnost sa AUTOCAD-om posto slabo koji program zna dobro da procita njegov dwg.

    Ali ako AUTOCAD-ov 2D crtez snimis u dxf formatu, QCad ga cita korektno.  😉
    Za QCad imas uputstvo ns srpskom:
    http://www.linuxo.net/component/option,com_docman/task,doc_download/gid,32/Itemid,52/
    i vrlo je upotrebljiva aplikacija…

    8. maj 2008. u 7:16 am kao odgovor na: Slackware 12.1 is released! #69646
    jovir
    Učesnik

    ftp://swtsrv.informatik.uni-mannheim.de/pub/linux/distributions/slackware/slackware-12.1-iso/slackware-12.1-install-dvd.iso

    Hvala za link.  😉

    7. maj 2008. u 10:12 pm kao odgovor na: Slackware 12.1 is released! #69643
    jovir
    Učesnik

    Ima li gde DVD ISO fajl za skidanje?

    8. april 2008. u 11:35 am kao odgovor na: Spajanje video fajlova? #68812
    jovir
    Učesnik

    Ljudi a kako da kompresujem npr te spojene fajlove, imam neke filmove na 2 CD-a, i kad ih spojim velicina fajla je oko 1400MB, kako to sad da spustim na 700MB?

    Može to da se izvede, ali ostaje pitanje kvaliteta slike posle takve kompresije. DiVX i XviD kodeci to ne mogu dovoljno kvalitetno sa tolikom kompresijom, jedino da probaš sa kodekom x264…
    A kao alat za to prepoporučujem Avidemux2.

    28. mart 2008. u 8:40 am kao odgovor na: DivX na Linux-u #68307
    jovir
    Učesnik

    samo uninstaliraj taj glupi mplayer…

    Ovde sigurno ima neko glup a mplayer to svakako nije…

  • Autor
    Članci
Gledanje 41 članaka - 41 do 50 (od 538 ukupno)
1 2 3 4 5 6 … 52 53 54
+ Учитај још