Latinica

[dokman]

Uspeo sam instalirati slmodem-2.9.11-20090222.tar.gz >:D , probam se konektovati preko KPPP i zakuca na initializing modem, probao sam query modem i dobijem sliku

kad sam rasetovao masinu nista nece da radi, mislim na ovo sa modemom, morao sam odraditi
[code]# mknod -m 600 /dev/slamr0 c 242 0
# /usr/sbin/slmodemd –country=USA /dev/slamr0[/code]
postoji li nacin da se doda negde komanda da se ovo pokrece prilikom boot-a?

[dokman]

iskljucio sam i ponovo pokrenuo snd-intel8x0m, i ponovo pokrenuo scanModem i sad mi je izbacio
[code]Analysing card in PCI bus 00:1f.6, writing to scanout.00:1f.6
        Modem with PCI ID 8086:24c6 is in the software modem category.
Checking for match with Archived softmodem information.
IDENT=slmodemd
Using scanout.00:1f.6 data, and writing guidance to ModemData.txt
Writing Intel.txt
Writing Smartlink.txt

Writing residual guidance customized to your System.
  A subfolder Modem/  has been written,  containing these files with more detailed Information:
——————————————————————————————
1stRead.txt    Bootup.txt      DriverCompiling.txt  InfoGeneral.txt
Intel.txt      ModemData.txt    Rational.txt        Smartlink.txt
SoftModem.txt  Testing.txt      UNSUBSCRIBE.txt      YourSystem.txt
dmesg.txt      scanout.00:1f.6  wvdial.txt
——————————————————————————————-
      Please read 1stRead.txt first for Guidance.[/code]

kakva je to zajebancija, i Intel i SmartLink?

Skinuo sam ovaj slmodemd, pa cu probati sa njim.
a sta je sa ovim ungrab, cemu to sluzi?

[dokman]

Opet sam citao poruku posle
[code]./scanModem[/code]
[code]Analysing card in PCI bus 00:1f.6, writing to scanout.00:1f.6
        Modem with PCI ID 8086:24c6 is in the software modem category.
The modem driver snd-intel8x0m is Not loaded.

To enable functional diagnostics, please either briefly login as Root:
        su – root (Not for Ubuntu)
and unload and reload the modem driver
          modprobe -r snd-intel8x0m
          modprobe snd-intel8x0m
Exit Root status
        exit
and rerun
        ./scanModem[/code]

da nije u tome caka, da probam ponovo ucitati ovaj driver?

[dokman]

Pokrenuo sam scanModem i dobio ovo u attach-u.
Nisam strucnjak za desifrovanje ovih poruka, rece tamo na kraju da odradim
[code]dmesg > dmesg.txt[/code]
nesto pri boot-u ukljuci modem pa ga iskljuci ili tako nesto.

Malo sam trazio po Linuxant-u, moj PCI ID je 8086:24c6, pa mi nije jasno kakve veze ima Intel i Conexant

INTEL AC-Link Controller (ICH)
# PCI ID 8086:7186
# PCI ID 8086:7196
# PCI ID 8086:2416
# PCI ID 8086:2446
# PCI ID 8086:2486
# PCI ID 8086:24C6
# PCI ID 8086:24D6
# PCI ID 8086:266D
# PCI ID 8086:2426

Ima li nade za ovo cudo?

[dokman]

Nesto nije u redu sa ovom skriptom, ne mogu da je otpakujem
[code]bzip2: (stdin) is not a bzip2 file.
tar: Child returned status 2
tar: Error exit delayed from previous errors[/code]

Nasao sam drugu na
[code]http://ubuntuforums.org/attachment.php?attachmentid=38472&d=1184701553[/code]

Probao sam instalirati slmodem-2.9.11-20051101.tar.gz i dobio
[code]kernel-ver.c:11: error: (Each undeclared identifier is reported only once
kernel-ver.c:11: error: for each function it appears in.)
make[1]: *** [kernel-ver] Error 1
make[1]: Leaving directory `/home/dokman/Desktop/linux/slmodem-2.9.11-20051101/drivers’
make: *** [drivers] Error 2[/code]
taj driver sam skinuo onako od oka, mozda zbog toga javlja gresku!

Bacam se na novi pokusaj sa scanModem-om!

Hvala na brzom odgovoru!

[dokman]

Pozdrav svima!

Hteo bi na laptopu da osposobim modem.

lspci izbacuje
[code]00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC’97 Modem Controller (rev 03)
[/code]

Za svaki slucaj da pokusam sa scanModem skriptom, da budem siguran koji je modem, ali izgleda nesto nije u redu sa sajtom.
Moze li mi neko poslati scanModem na mail ili ga negde okaciti da ga skinem?
Inace imam instaliram Slack 12.2.

Hvala unapred!

[dokman]

Pozdrav svima! Evo pisem sa Slack-a  O0, skinuo sam one malo starije driver-e, ispravio koji je distro i instalirao bez ikakvih problema, jedino sam morao malo da brljam po /etc/ppp/options, ali nije strasno. Hocu da vam se zahvalim svima na trudu i pomoci!

[dokman]

Moguce da je zbog tog novog drivera, ne znam za to ispravljanje skripte, prosli put je neko postovao svoje skripte a ja ih samo iskopirao kod mene i radi! Sad sam na terenu tako da nista od novog pokusaja sa drajverom dok ne dodjem kuci! I ja mislim da je source vec instaliran, ali pogledacu!
Hvala vam na pomoci, javljam sta sam uradio!

[dokman]

Prekjuce sam instalirao Slack, full install, to podrazumeva i kernel source? Postoji li nacin da kompajliram driver? Citam postove od pre, svi su bez problema instalirali driver, na 12.1 je radio kao zmaj, doduse neki stariji driver sa ispravljanom inst i boot skriptom! Kkao da znam gde sam pogresio, sta nije u redu?

[dokman]

Pozdrav svima!

Ja skinuo ovaj drajver i pokusao instalirati i nista, nece da radi. Sve sam radio po uputstvu za instalaciju, ili je potrebno jos nesto, pokusavao sam rucno da pokrenem Intel536_boot ali kaze

[code]FATAL: Module Intel536 not found.
insmod: can’t read ‘Intel536′: No such file or directory
error loading Intel536
ERROR: Module Intel536 does not exist in /proc/modules[/code]

Ovo je citava instalacija

[code]root@dokman:~/Desktop/Slack 12.2/Intel-536EP/intel-536-537# make clean
cd coredrv; make clean
make[1]: Entering directory `/root/Desktop/Slack 12.2/Intel-536EP/intel-536-537/coredrv’
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
rm -rf .tmp_versions
make[1]: Leaving directory `/root/Desktop/Slack 12.2/Intel-536EP/intel-536-537/coredrv’
rm -f *.o *.ko
root@dokman:~/Desktop/Slack 12.2/Intel-536EP/intel-536-537# make 536
cd coredrv; make clean
make[1]: Entering directory `/root/Desktop/Slack 12.2/Intel-536EP/intel-536-537/coredrv’
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
rm -rf .tmp_versions
make[1]: Leaving directory `/root/Desktop/Slack 12.2/Intel-536EP/intel-536-537/coredrv’
rm -f *.o *.ko
  Module precompile check
  Current running kernel is: 2.6.27.7-smp
  /lib/modules…  autoconf.h exists
diff: /boot/vmlinuz.autoconf.h: No such file or directory
  autoconf.h matches running kernel
diff: /boot/vmlinuz.version.h: No such file or directory
  version.h matches running kernel
make[1]: Entering directory `/root/Desktop/Slack 12.2/Intel-536EP/intel-536-537′
2.6.27.7-smp
make[2]: Entering directory `/root/Desktop/Slack 12.2/Intel-536EP/intel-536-537/coredrv’
make -C /lib/modules/2.6.27.7-smp/build SUBDIRS=/root/Desktop/Slack 12.2/Intel-536EP/intel-536-537/coredrv modules
make[3]: Entering directory `/usr/src/linux-2.6.27.7′
make[3]: *** No rule to make target `12.2/Intel-536EP/intel-536-537/coredrv’.  Stop.
make[3]: Leaving directory `/usr/src/linux-2.6.27.7′
make[2]: *** [536core_26] Error 2
make[2]: Leaving directory `/root/Desktop/Slack 12.2/Intel-536EP/intel-536-537/coredrv’
2.6.27.7-smp
Failed to build driver
make[1]: Leaving directory `/root/Desktop/Slack 12.2/Intel-536EP/intel-536-537′
root@dokman:~/Desktop/Slack 12.2/Intel-536EP/intel-536-537# make install[/code]

ako neko ima volje i zivaca neka pomogne, meni nista nije jasno!

Hvala umapred!

[Autor]

Članci