Početak›Forumi›Linuks distribucije›Slackware›Slackware 11
- This topic has 94 odgovora, 24 glasa, and was last updated 17 years, 6 months ranije by LimitMan.
-
AutorČlanci
-
24. avgust 2006. u 2:41 am #43839nVideoUčesnik
Ja izgubio iso file…
Moram ponovo da ga skidam!
A Mandrivu nisam ni probao, probao sam zadnji mandrake valjda 11 il tako nesto i totalno sam se razocarao…24. avgust 2006. u 3:58 am #43840miodragzUčesnikOpet pacov zeza zzzzzzzzzzzzzzz
25. avgust 2006. u 11:12 am #43841djuxUčesnikFri Aug 25 04:35:22 CDT 2006
Here is Slackware 11.0 release candidate 3. I think most of the irresistible
upgrades are in here now, and the bug reports have been mostly handled.
There may still be a few changes, and possibly another release candidate,
but this is pretty close to final with the exception of updating
documentation and building ZipSlack. Thanks very much to everyone who is
helping to test these release candidates — I think this is going to be a
very up to date and stable release. 🙂
a/glibc-solibs-2.3.6-i486-5.tgz: Patched an issue with kernel version parsing
in ld-2.3.6.so that was leading glibc to treat 2.4 kernels with 4 version
parts (such as 2.4.33.2) as if they supported NPTL, leading to a crash
at boot.
a/glibc-zoneinfo-2.3.6-noarch-5.tgz: Updated timezone information from
tzdata2006j.
a/kernel-ide-2.4.33.2-i486-1.tgz: Upgraded to 2.4.33.2 sata.i kernel.
Enabled support for OOM killer and HIGHMEM4G.
a/kernel-modules-2.4.33.2-i486-1.tgz: Upgraded to Linux 2.4.33.2 modules.
a/udev-097-i486-6.tgz: Restore ttyUSB access to members of the tty group.
Thanks to Eugene Crosser.
In rc.udev, ignore lines that start with ‘#’.
Thanks to Ian Bates.
Removed hostap and hostap_cs dupes from blacklist.
Thanks to giovanni quadriglio.
Patched rc.optical-symlinks to avoid error messages with real SCSI devices
and the SCSI generic driver.
Thanks to Lorenzo Buzzi.
ap/lm_sensors-2.10.0-i486-1.tgz: Added lm_sensors-2.10.0, which contains the
libsensors library that KDE can use for hardware status monitoring.
ap/vim-7.0.066-i486-1.tgz: Upgraded to vim 7.0.066.
Added reasonable default vimrc if none exists. Thanks to Eric Hameleers.
xap/vim-gvim-7.0.066-i486-1.tgz: Upgraded to gvim 7.0.066 (requires vim).
d/kernel-headers-2.4.33.2-i386-1.tgz: Upgraded to Linux 2.4.33.2 headers.
d/perl-5.8.8-i486-2.tgz: Upgraded to DBD-mysql-3.0006 and DBI-1.52.
Eugene Crosser reported that DBD compiled against an older version of
libmysqlclient no longer worked without a recompile. Just to be on the
safe side, everything linked with libmysqlclient is getting recompiled.
d/pkgconfig-0.21-i486-2.tgz: Export PKG_CONFIG_PATH.
k/kernel-source-2.4.33.2-noarch-1.tgz: Upgraded to Linux 2.4.33.2 source.
Enabled support for OOM killer and HIGHMEM4G in default .config.
kde/amarok-1.4.2-i486-1.tgz: Upgraded to amarok-1.4.2.
kde/kdebase-3.5.4-i486-6.tgz: Recompiled to use libsensors with ksysguardd.
Fixed location of kdeglobals, removed font defaults but kept the
anti-aliasing fixes.
kde/koffice-1.5.2-i486-3.tgz: Recompiled against libmysqlclient and libruby.
kde/qt-3.3.6-i486-3.tgz: Recompiled against libmysqlclient, added symlink
in /usr/lib/pkgconfig to qt-mt.pc.
l/alsa-driver-1.0.11_2.4.33.2-i486-1.tgz: Recompiled for Linux 2.4.33.2.
l/glibc-2.3.6-i486-5.tgz: Patched an issue with kernel version parsing in
ld-2.3.6.so that was leading glibc to treat 2.4 kernels with 4 version parts
(such as 2.4.33.2) as if they supported NPTL, leading to a crash at boot.
Added sa_IN and ru_RU.CP1251 locale support.
Updated timezone information from tzdata2006j.
Updated timezone utilities from tzcode2006j.
l/glibc-i18n-2.3.6-noarch-5.tgz: Rebuilt.
Added sa_IN and ru_RU.CP1251 locale support.
l/glibc-profile-2.3.6-i486-5.tgz: Recompiled.
l/libmusicbrainz-2.1.4-i486-1.tgz: Upgraded to libmusicbrainz-2.1.4.
l/libvisual-0.4.0-i486-1.tgz: Added libvisual-0.4.0. Just the library for
now (no plugins), but this should make it much easier to compile and use
audio visualization plugins without having to recompile amaroK.
n/bitchx-1.1-i486-4.tgz: Recompiled against libmysqlclient.
n/openldap-client-2.3.27-i486-1.tgz: Upgraded to openldap-client-2.3.27.
n/php-4.4.4-i486-2.tgz: Recompiled against libmysqlclient.
t/tetex-3.0-i486-4.tgz: Recompiled against new LessTif to stop warnings
from xdvi.
t/tetex-doc-3.0-i486-4.tgz: Rebuilt. Moved info pages to /usr/info.
Thanks to Kris Karas for pointing out the misplaced info pages.
xap/gimp-2.2.13-i486-1.tgz: Upgraded to gimp-2.2.13.
extra/3dfx-glide/*: Removed, as it most likely doesn’t work.
extra/k3b/k3b-0.12.17-i486-1.tgz: Upgraded to k3b-0.12.17.
extra/k3b/k3b-i18n-0.12.17-noarch-1.tgz: Upgraded to k3b-i18n-0.12.17.
extra/linux-wlan-ng/linux-wlan-ng-0.2.1pre25_2.4.33.2-i486-1.tgz:
Recompiled for Linux 2.4.33.2.
extra/slackpkg/slackpkg-2.08-noarch-3.tgz: Upgraded to slackpkg-2.08-noarch-3.
Thanks to Piter Punk.
bootdisks/*: Upgraded to Linux 2.4.33.2 kernels.
isolinux/initrd.img: Upgraded USB/IEEE1394 modules to Linux 2.4.33.2.
isolinux/network.dsk: Upgraded network modules to Linux 2.4.33.2.
isolinux/pcmcia.dsk: Upgraded pcmcia modules to Linux 2.4.33.2.
rootdisks/install.1: Upgraded USB/IEEE1394 modules to Linux 2.4.33.2.
rootdisks/install.2: Upgraded USB/IEEE1394 modules to Linux 2.4.33.2.
rootdisks/install.zip: Upgraded USB/IEEE1394 modules to Linux 2.4.33.2.
rootdisks/network.dsk: Upgraded network modules to Linux 2.4.33.2.
rootdisks/pcmcia.dsk: Upgraded pcmcia network modules to Linux 2.4.33.2.
kernels/*: Upgraded to Linux 2.4.33.2 kernels, except the huge.s kernel.After much thought and consultation with developers, it has been decided to
move 2.6.17.x out of /testing and into /extra. It runs stable by all reports,
has better wireless support, and is not going to be stale as soon. In
addition, HIGHMEM4G has been enabled. This caused no problems with my old
486 with 24MB (the one I use for compiling KDE ;-), and Tomas Matejicek has
enabled this in SLAX for a long time with no reports of problems, so I
believe it is a safe option (and is needed by many modern machines).
Thanks again to Andrea for building these kernels and packages. 🙂kernels/huge26.s/*: Upgraded huge26.s kernel to 2.6.17.11.
extra/linux-2.6.17.11/kernel-generic-2.6.17.11-i486-1.tgz:
Upgraded to Linux 2.6.17.11 generic kernel.
extra/linux-2.6.17.11/kernel-headers-2.6.17.11-i386-1.tgz:
Upgraded to Linux 2.6.17.11 kernel headers.
extra/linux-2.6.17.11/kernel-modules-2.6.17.11-i486-1.tgz
Upgraded to Linux 2.6.17.11 kernel modules.
Load PC speaker support in rc.modules. Thanks to NetrixTardis.
extra/linux-2.6.17.11/kernel-source-2.6.17.11-noarch-1.tgz
Upgraded to Linux 2.6.17.11 kernel source.testing/packages/cairo-1.2.4-i486-1.tgz: Added cairo-1.2.4.
testing/packages/fontconfig-2.3.95-i486-1.tgz: Added fontconfig-2.3.95.
testing/packages/php-5.1.5/php-5.1.5-i486-2.tgz: Recompiled against
libmysqlclient.5. septembar 2006. u 12:18 am #43842MicoUčesnikposteno volim Mandrivu i instaliracu je na nekom kompu cisto iz nostalgije ali vreme je da se migrira na neki drugi distro. 😀
Nadji neki HDD pa je gurni na njega samo posle u Biosu prebacuj što mora da bude dual boot. ^-^
16. septembar 2006. u 12:58 pm #43843doctorXUčesnikKad ce vise 11-ica?
17. septembar 2006. u 2:09 pm #43844djuxUčesnikNiko to tacno ne zna. Verovatno kad Pat bude smatrao da je slack ultra stabilan ^-^
23. septembar 2006. u 4:44 pm #43845RiSKUčesnikSTIGOOOOOO!!!
Announcing Slackware Linux 11!
The only Slackware release more than a year in the making, this
edition of Slackware combines Slackware’s legendary simplicity,
stability, and security with some of the latest advances in Linux
technology. Expect no less than the best Slackware yet.Among the many program updates and distribution enhancements, you’ll
find two of the most advanced desktop environments available today:
Xfce 4.2.3.2, a fast and lightweight but visually appealing and easy
to use desktop environment, and KDE 3.5.4, the latest version of the
award-winning K Desktop Environment.Slackware uses the 2.4.33.3 kernel bringing you advanced performance
features such as the ReiserFS journaling filesystem, SCSI and ATA RAID
volume support, SATA support, and kernel support for X DRI (the Direct
Rendering Interface) that brings high-speed hardware accelerated 3D
graphics to Linux. Additional kernels allow installing Slackware
using any of the journaling filesystems available for Linux, including
ext3, ReiserFS, IBM’s JFS, and SGI’s XFS. Slackware 11.0 also fully
supports the 2.6 kernel series, with your choice of the well-tested
2.6.17.13 kernel in /extra (including a version of this kernel that
supports multiple processors, multi-core CPUs, HyperThreading, and
about every other optimization available), or the recently released
2.6.18 kernel in /testing. This kernel also spent a long time in
development and in our own testing has proven to be fast, stable,
and reliable.All of these kernels may be used with Slackware’s CD/DVD based
installation system, and NFS network installs may be done using the
2.6.17.13 (huge26.s) kernel.From the beginning, Slackware has offered a stable and secure Linux
distribution for UNIX veterans as well as an easy-to-use system for
beginners. Slackware includes everything you’ll need to run a
powerful server or workstation. Each Slackware package follows the
setup and installation instructions from its author(s) as closely as
possible, offering you the most stable and easily expandable setupftp://ftp.slackware.com/pub/slackware/slackware-current/ANNOUNCE.11_0
Jos ga nema kao verzije 11 na ftp serveru, verovatno ce to da srede nocas… Samo nagadjam. 😉
3. oktobar 2006. u 5:43 am #43846crveni1UčesnikPosle dugog čekanja napokon se pojavila 11ka. Srećno momci
http://slackware.com/3. oktobar 2006. u 9:33 am #43847AnonimniGostkonacno
samo jos da ga skinemo
ej 3.7 gb je dosta vise nego prethodna verzija
ponovo default je 2.4 kernel
ne znam koja alsa ide uz njega3. oktobar 2006. u 12:45 pm #43848djuxUčesnikSvaka cast ! A i vreme je bilo, ne bi bilo u redu od Pat-a da nas vise drzi u neizvesnosti. 😀 Samo da ga Toma ubaci u Linuxo Klub i odmah ga nabavljam O0
-
AutorČlanci
Moraš biti prijavljen da bi postavio komentar u ovoj temi.