Početak›Forumi›Linuks distribucije›Fedora, Red Hat,…›lexmark x203nskener problem
- This topic has 15 odgovora, 4 glasa, and was last updated 13 years ranije by tata78.
-
AutorČlanci
-
21. mart 2011. u 12:17 pm #12325tata78Učesnik
Koristim Fedoru 14, imam Lexmark x203n, stamapac radi ali skener ne radi, komp. ga ne prepoznaje, Ima li resenja da proradi? Hvala unapred.
21. mart 2011. u 6:23 pm #86708thomasGost22. mart 2011. u 6:35 am #86709tata78GostNe znam kako da instaliram to? Sta treba da uradim sa fajlom kada se downloaduje?
22. mart 2011. u 10:54 am #86710thomasGostZaista ne znam kako to da se instalira ali verovatno na slican nacin kao tar.bz i slicno
22. mart 2011. u 11:30 am #86711LINUSERGostOvde imaš rpm i deb pakete:
http://www.openprinting.org/printer/Lexmark/Lexmark-X203n23. mart 2011. u 6:48 am #86713tata78GostInstalirao prema uputstvu ali opet isto, ne prepoznaje skener.
25. mart 2011. u 12:17 pm #86719kmilosGostAko se kači na USB, koji je USB VID/PID tog uređaja?
Npr., vidi izlaz naredbe ‘lsusb’, ili zaviri u ‘/proc/bus/usb/devices’. Takođe pokušaj da pokreneš ‘sane-find-scanner -v -v’ pa postavi šta kaže.
28. mart 2011. u 8:50 am #86725tata78Gostsane-find-scanner -v -v
This is sane-find-scanner from sane-backends 1.0.21
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.searching for SCSI scanners:
checking /dev/scanner… failed to open (Invalid argument)
checking /dev/sg0… failed to open (Invalid argument)
checking /dev/sg1… failed to open (Invalid argument)
checking /dev/sg2… failed to open (Invalid argument)
checking /dev/sg3… failed to open (Invalid argument)
checking /dev/sg4… failed to open (Invalid argument)
checking /dev/sg5… failed to open (Invalid argument)
checking /dev/sg6… failed to open (Invalid argument)
checking /dev/sg7… failed to open (Invalid argument)
checking /dev/sg8… failed to open (Invalid argument)
checking /dev/sg9… failed to open (Invalid argument)
checking /dev/sga… failed to open (Invalid argument)
checking /dev/sgb… failed to open (Invalid argument)
checking /dev/sgc… failed to open (Invalid argument)
checking /dev/sgd… failed to open (Invalid argument)
checking /dev/sge… failed to open (Invalid argument)
checking /dev/sgf… failed to open (Invalid argument)
checking /dev/sgg… failed to open (Invalid argument)
checking /dev/sgh… failed to open (Invalid argument)
checking /dev/sgi… failed to open (Invalid argument)
checking /dev/sgj… failed to open (Invalid argument)
checking /dev/sgk… failed to open (Invalid argument)
checking /dev/sgl… failed to open (Invalid argument)
checking /dev/sgm… failed to open (Invalid argument)
checking /dev/sgn… failed to open (Invalid argument)
checking /dev/sgo… failed to open (Invalid argument)
checking /dev/sgp… failed to open (Invalid argument)
checking /dev/sgq… failed to open (Invalid argument)
checking /dev/sgr… failed to open (Invalid argument)
checking /dev/sgs… failed to open (Invalid argument)
checking /dev/sgt… failed to open (Invalid argument)
checking /dev/sgu… failed to open (Invalid argument)
checking /dev/sgv… failed to open (Invalid argument)
checking /dev/sgw… failed to open (Invalid argument)
checking /dev/sgx… failed to open (Invalid argument)
checking /dev/sgy… failed to open (Invalid argument)
checking /dev/sgz… failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.searching for USB scanners:
checking /dev/usb/scanner… failed to open (Invalid argument)
checking /dev/usb/scanner0… failed to open (Invalid argument)
checking /dev/usb/scanner1… failed to open (Invalid argument)
checking /dev/usb/scanner2… failed to open (Invalid argument)
checking /dev/usb/scanner3… failed to open (Invalid argument)
checking /dev/usb/scanner4… failed to open (Invalid argument)
checking /dev/usb/scanner5… failed to open (Invalid argument)
checking /dev/usb/scanner5… failed to open (Invalid argument)
checking /dev/usb/scanner7… failed to open (Invalid argument)
checking /dev/usb/scanner8… failed to open (Invalid argument)
checking /dev/usb/scanner9… failed to open (Invalid argument)
checking /dev/usb/scanner10… failed to open (Invalid argument)
checking /dev/usb/scanner11… failed to open (Invalid argument)
checking /dev/usb/scanner12… failed to open (Invalid argument)
checking /dev/usb/scanner13… failed to open (Invalid argument)
checking /dev/usb/scanner14… failed to open (Invalid argument)
checking /dev/usb/scanner15… failed to open (Invalid argument)
checking /dev/usbscanner… failed to open (Invalid argument)
checking /dev/usbscanner0… failed to open (Invalid argument)
checking /dev/usbscanner1… failed to open (Invalid argument)
checking /dev/usbscanner2… failed to open (Invalid argument)
checking /dev/usbscanner3… failed to open (Invalid argument)
checking /dev/usbscanner4… failed to open (Invalid argument)
checking /dev/usbscanner5… failed to open (Invalid argument)
checking /dev/usbscanner6… failed to open (Invalid argument)
checking /dev/usbscanner7… failed to open (Invalid argument)
checking /dev/usbscanner8… failed to open (Invalid argument)
checking /dev/usbscanner9… failed to open (Invalid argument)
checking /dev/usbscanner10… failed to open (Invalid argument)
checking /dev/usbscanner11… failed to open (Invalid argument)
checking /dev/usbscanner12… failed to open (Invalid argument)
checking /dev/usbscanner13… failed to open (Invalid argument)
checking /dev/usbscanner14… failed to open (Invalid argument)
checking /dev/usbscanner15… failed to open (Invalid argument)
trying libusb:bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1D6B
idProduct 0x0001
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.35.11-83.fc14.i686 uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:10.2)
bNumConfigurations 1bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mAbLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x062A
idProduct 0x0000
bcdDevice 0.00
iManufacturer 0 ()
iProduct 0 ()
iSerialNumber 0 ()
bNumConfigurations 1bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 160 (Remote Wakeup)
MaxPower 100 mAbLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 0 ()bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 4
bInterval 10 ms
bRefresh 0
bSynchAddress 0bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1D6B
idProduct 0x0001
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.35.11-83.fc14.i686 uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:10.1)
bNumConfigurations 1bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mAbLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1D6B
idProduct 0x0001
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.35.11-83.fc14.i686 uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:10.0)
bNumConfigurations 1bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mAbLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x043D
idProduct 0x0149
bcdDevice 0.00
iManufacturer 1 (Lexmark International)
iProduct 2 (Lexmark X203n)
iSerialNumber 3 (59222SF)
bNumConfigurations 1bLength 9
bDescriptorType 2
wTotalLength 80
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 2 mAbLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 5 (Scan)bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 4 (Print)bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0bLength 7
bDescriptorType 5
bEndpointAddress 0x04 (out 0x04)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 6 (HID)bLength 7
bDescriptorType 5
bEndpointAddress 0x85 (in 0x05)
bmAttributes 3 (interrupt)
wMaxPacketSize 64
bInterval 16 ms
bRefresh 0
bSynchAddress 0checking for GT-6801 …
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 …
this is not a GT-6816 (bcdUSB = 0x200)
checking for GT-8911 …
this is not a GT-8911 (check 2, bcdUSB = 0x200)
checking for MA-1017 …
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
checking for MA-1015 …
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 …
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] …
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 …
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL646_HP …
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL660+GL646 …
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL84x …
this is not a GL84x (bDeviceClass = 0, bInterfaceClass = 255)
checking for ICM532B …
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
checking for PV8630/LM9830 …
this is not a PV8630/LM9830 (bcdUSB = 0x200)
checking for M011 …
this is not a M011 (bDeviceClass = 0)
checking for RTS8822 …
this is not a RTS8822 (bNumEndpoints = 2)
checking for rts8858c …
this is not a rts8858c (bcdUSB = 0x200)
checking for SQ113 …
this is not a SQ113 (bNumEndpoints = 2)
checking for HP4500C/4570C/5500C/5550C/5590/7650 chipset …
this is not a HP4500C/4570C/5500C/5550C/5590/7650 chipset (bDeviceClass = 0)
checking for rts8801/rts8891 …
this is not a rts8801/rts8891 (bcdUSB = 0x200)found USB scanner (vendor=0x043d [Lexmark International], product=0x0149 [Lexmark X203n]) at libusb:001:003
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1D6B
idProduct 0x0002
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.35.11-83.fc14.i686 ehci_hcd)
iProduct 2 (EHCI Host Controller)
iSerialNumber 1 (0000:00:10.3)
bNumConfigurations 1bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mAbLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 4
bInterval 12 ms
bRefresh 0
bSynchAddress 0
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend’s manpage.# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can’t be detected by this program.28. mart 2011. u 8:51 am #86726tata78Gostlsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 062a:0000 Creative Labs Optical mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 043d:0149 Lexmark International, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub28. mart 2011. u 9:03 pm #86732kmilosGostIzgleda si se baš usrećio 🙁 Pazi kad ne mogu ama baš ništa da izguglam (sem takođe tvojih postova na drugim forumima). Na sane listi ga nema ni kao nepodržanog:
http://www.sane-project.org/lists/sane-mfgs-cvs.html#Z-LEXMARK
Mislim da jedino ostaje da se ljubazno raspitaš sa svim ovim detaljima (i napomenom da si pokušao pretragu) na sane dopisnoj listi
-
AutorČlanci
Moraš biti prijavljen da bi postavio komentar u ovoj temi.