Početak›Forumi›Linuks distribucije›Mandriva›Hardver›HP Compaq nx6310 i broadcom wireless
- This topic has 2 odgovora, 3 glasa, and was last updated 16 years, 6 months ranije by Miso Vranes.
-
AutorČlanci
-
1. mart 2007. u 6:10 pm #8411markeljaUčesnik
Niakako da poteram wireless sa ovog laptopa.
Instalirao sam ndiswrapper,
Ucitao win drajver
Ucitao ndiswrapper modul.
I posle toga nista.
Ne mogu da podignem interfejs, neki se put javlja kao eth1 a neki put ga upste nema.U windowsu na ovom laptopu pored Broadcom 802.11b/g WLAN preko koga sam konektovan na moju kucnu mrezu imai neki 1394 Net Adapter #2 koji sam onemogucio.
22. septembar 2007. u 1:50 pm #52984holodocUčesnikJa takođe pokušavam da poteram wireless na pomenutom modelu međutim ne samo da imam problema sa drajverima već ne znam ni koju konkretno verziju treba da skinem. Naime, na zvaničnom sajtu HPa u podršci je kao drajver za instalaciju na Windowsu naveden neki u verziji 43xx i on radi odlično na ovom laptopu.Međutim kada pokušam taj drajver da učitam u PCLinuxOS prijavljuje mi da ne postoji uređaj koji je podržan tim tipom drajvera. Da stvar bude gora u Control panelu Windowsa uređaj se identifikuje kao Broadcom 440x 10/100Ta kad za njega skinem drajvere sa oficijelnog sajta Linux se ukoči “na mrtvo” pa samo reset pomaže.
BTW, da li je ovaj ndiswrapper u verziji 2007 PCLinuxOS-a u stvari kompletna stvar (bez ikakvog doinstaliranjai sl) da odmah nakon instalacije može da se direktno koristi za učitavanje drajvera?
Hvala.
22. septembar 2007. u 2:07 pm #52985Miso VranesUčesnikOvo je radilo kod mene za PCLinuxos2007, doduse nije bio hp notebook :
”
With TR4, the 4306 driver is apparently blacklisted for some kind of conflict. PCC wants to default me to the new bcm43xx driver, and many people seem to have good results with this. In fact, every time I post a comment in the forums about manually configuring ndiswrapper, someone comments back that either I should be able to configure it in PCC, and yes, I should, or that I should use the bcm43xx Linux driver. Neither of these have worked for me, but your mileage may vary. Every time I have tried to set up ndiswrapper for the 4306 chipset in PCC in TR4, it defaulted back to the bcm43xx driver, and I cannot get any connection with my hub when this driver is loaded. Here is what I had to do…1. Copy the bcmwl5.inf and bcmwl5.sys files from your driver CD to /lib/firmware. (Both need to be present according to some posters). If you want to use the graphical file manager for this, make sure you either log in as root to begin with, or use the Krusader or Kongueror in superuser mode as the file manager.
2. Open a terminal window, log in as root and entercd /lib/firmware.
3. Typendiswrapper -i bcmwl5.inf to associate the bcm driver with ndiswrapper.
4. Typendiswrapper -l to confirm that it is installed.
5. Typemodprobe ndiswrapper to load ndiswrapper with the bcm driver into the kernel.
Mine came right up after that, and works like a charm. You may need to type: dhclient wlan0 (or whatever your card ID is), to get an IP address from your DHCP server or router. If you run ifconfig it will report to you all the details on your connection, and whether or not you have an IP assigned.
I see a lot of people in the forum saying that you just have to set it up in PCC, but a few other people like me have found that this does not work for them all of the time with this chipset. The new bcm43xx driver seems to be included in the latest kernel, and is still under development.
According to the project website, http://bcm43xx.berlios.de/, as of 5-17-07 the current version lacks WEP support, for instance. If this works for you and you don’t need the missing features, then great; it would help to support the hard work of the folks developing this driver to use it and provide feedback. They have to reverse engineer this driver, as Broadcom will not share the hardware specs with other developers. However, the ndiswrapper solution is very robust and includes all of the Windows driver features. It has been working well for many people for a long time.
“
-
AutorČlanci
Forum ‘Hardver’ je zaključan za nove teme i odgovore.