lexmark x203nskener problem

15 odgovora [Poslednji unos]
tata78
Slika korisnika tata78
Offline
User
Član od: 21/03/2011

Koristim Fedoru 14, imam Lexmark x203n, stamapac radi ali skener ne radi, komp. ga ne prepoznaje, Ima li resenja da proradi? Hvala unapred.

0
thomas
Slika korisnika thomas
Offline
User
Član od: 22/12/2010
tata78
Slika korisnika tata78
Offline
User
Član od: 21/03/2011

Ne znam kako da instaliram to? Sta treba da uradim sa fajlom kada se downloaduje?

thomas
Slika korisnika thomas
Offline
User
Član od: 22/12/2010

Zaista ne znam kako to da se instalira ali verovatno na slican nacin kao tar.bz i slicno

LINUSER
Slika korisnika LINUSER
Offline
User
Član od: 29/05/2006
__________________

“...Neki jedu da bi mogli živeti a žive očajno.
A drugi, opet, žive samo da bi jeli ali zato jedu sjajno.”

tata78
Slika korisnika tata78
Offline
User
Član od: 21/03/2011

Instalirao prema uputstvu ali opet isto, ne prepoznaje skener.

kmilos
Slika korisnika kmilos
Offline
User
Član od: 29/05/2006

Ako se kači na USB, koji je USB VID/PID tog uređaja?

Npr., vidi izlaz naredbe 'lsusb', ili zaviri u '/proc/bus/usb/devices'. Takođe pokušaj da pokreneš 'sane-find-scanner -v -v' pa postavi šta kaže.

tata78
Slika korisnika tata78
Offline
User
Član od: 21/03/2011

sane-find-scanner -v -v

This is sane-find-scanner from sane-backends 1.0.21

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
trying libusb:

bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 (Linux 2.6.35.11-83.fc14.i686 uhci_hcd) iProduct 2 (UHCI Host Controller) iSerialNumber 1 (0000:00:10.2) bNumConfigurations 1 bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 2 bInterval 255 ms bRefresh 0 bSynchAddress 0

bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x062A idProduct 0x0000 bcdDevice 0.00 iManufacturer 0 () iProduct 0 () iSerialNumber 0 () bNumConfigurations 1 bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 160 (Remote Wakeup) MaxPower 100 mA bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 () bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 4 bInterval 10 ms bRefresh 0 bSynchAddress 0

bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 (Linux 2.6.35.11-83.fc14.i686 uhci_hcd) iProduct 2 (UHCI Host Controller) iSerialNumber 1 (0000:00:10.1) bNumConfigurations 1 bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 2 bInterval 255 ms bRefresh 0 bSynchAddress 0

bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 (Linux 2.6.35.11-83.fc14.i686 uhci_hcd) iProduct 2 (UHCI Host Controller) iSerialNumber 1 (0000:00:10.Innocent bNumConfigurations 1 bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 2 bInterval 255 ms bRefresh 0 bSynchAddress 0

bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x043D idProduct 0x0149 bcdDevice 0.00 iManufacturer 1 (Lexmark International) iProduct 2 (Lexmark X203n) iSerialNumber 3 (59222SF) bNumConfigurations 1 bLength 9 bDescriptorType 2 wTotalLength 80 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 () bmAttributes 192 (Self-powered) MaxPower 2 mA bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 bInterfaceSubClass 255 bInterfaceProtocol 255 iInterface 5 (Scan) bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 4 (Print) bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 bLength 7 bDescriptorType 5 bEndpointAddress 0x04 (out 0x04) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 6 (HID) bLength 7 bDescriptorType 5 bEndpointAddress 0x85 (in 0x05) bmAttributes 3 (interrupt) wMaxPacketSize 64 bInterval 16 ms bRefresh 0 bSynchAddress 0

checking for GT-6801 ... this is not a GT-6801 (bDeviceClass = Innocent checking for GT-6816 ... this is not a GT-6816 (bcdUSB = 0x200) checking for GT-8911 ... this is not a GT-8911 (check 2, bcdUSB = 0x200) checking for MA-1017 ... this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) checking for MA-1015 ... this is not a MA-1015 (bDeviceClass = Innocent checking for MA-1509 ... this is not a MA-1509 (bDeviceClass = Innocent checking for LM983[1,2,3] ... this is not a LM983x (bcdUSB = 0x200) checking for GL646 ... this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) checking for GL646_HP ... this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) checking for GL660+GL646 ... this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) checking for GL84x ... this is not a GL84x (bDeviceClass = 0, bInterfaceClass = 255) checking for ICM532B ... this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) checking for PV8630/LM9830 ... this is not a PV8630/LM9830 (bcdUSB = 0x200) checking for M011 ... this is not a M011 (bDeviceClass = Innocent checking for RTS8822 ... this is not a RTS8822 (bNumEndpoints = 2) checking for rts8858c ... this is not a rts8858c (bcdUSB = 0x200) checking for SQ113 ... this is not a SQ113 (bNumEndpoints = 2) checking for HP4500C/4570C/5500C/5550C/5590/7650 chipset ... this is not a HP4500C/4570C/5500C/5550C/5590/7650 chipset (bDeviceClass = Innocent checking for rts8801/rts8891 ... this is not a rts8801/rts8891 (bcdUSB = 0x200)

found USB scanner (vendor=0x043d [Lexmark International], product=0x0149 [Lexmark X203n]) at libusb:001:003

bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0002 bcdDevice 2.06 iManufacturer 3 (Linux 2.6.35.11-83.fc14.i686 ehci_hcd) iProduct 2 (EHCI Host Controller) iSerialNumber 1 (0000:00:10.3) bNumConfigurations 1 bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 4 bInterval 12 ms bRefresh 0 bSynchAddress 0 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

tata78
Slika korisnika tata78
Offline
User
Član od: 21/03/2011

lsusb

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 062a:0000 Creative Labs Optical mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 043d:0149 Lexmark International, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

kmilos
Slika korisnika kmilos
Offline
User
Član od: 29/05/2006

Izgleda si se baš usrećio Sad Pazi kad ne mogu ama baš ništa da izguglam (sem takođe tvojih postova na drugim forumima). Na sane listi ga nema ni kao nepodržanog:

http://www.sane-project.org/lists/sane-mfgs-cvs.html#Z-LEXMARK

Mislim da jedino ostaje da se ljubazno raspitaš sa svim ovim detaljima (i napomenom da si pokušao pretragu) na sane dopisnoj listi

http://lists.alioth.debian.org/mailman/listinfo/sane-devel

http://www.sane-project.org/contrib.html

tata78
Slika korisnika tata78
Offline
User
Član od: 21/03/2011

Nema od toga leba, razmisljam nesto, posto ne koristim skener svaki dan, da nekako samo kad treba da skeniram koristim Windows e sad koji bi bio najjednostavniji nacin, da li da ga instaliram na jednu particiju hard diska ili nekako drugacije?